MTHTrains ES44AC Kurzanleitung
M.T.H. HO ES44AC
Diesel Engine
Congratulations! You've just purchased the most
feature-rich and technically advanced HO diesel
locomotive ever produced! This highly detailed
model includes a broader range of features than you’ll
find on any other HO scale diesel, including smooth
performance from a three-scale-mile-per-hour crawl
to full throttle; “cruise control” for steady speeds
regardless of curves, switches and grades; built-in
decoders for DCC and the M.T.H. Digital Command
System (DCS); and a full range of prototypical
sounds. If you’re looking for motive power that’s
accurately detailed, smooth running, and a great deal
of fun to operate, it doesn’t get any better than this.
Operates on R1 - 360.0 mm (14 3/16 in) radius curves
with Code 70, Code 83 or Code 100 rails.
PLEASE READ THE MANUAL BEFORE USE AND SAVE
WWW.MTHHOTRAINS.COM
(PS3E+)
Engineer's Guide
PFA
Passenger/Freight
Announcements
This product may be protected by one or more of the following patents: 6,019,289; 6,280,278; 6,281,606; 6,291,263;
6,457,681; 6,491,263; 6,604,641; 6,619,594; 6,624,537; 6,655,640.
©2014, M.T.H. Electric Trains®, Columbia, MD 21046
CAUTION: ELECTRICALLY OPERATED PRODUCT:
WARNING: When using electrical products, basic safety precautions should be observed, including the following:
Read this manual thoroughly before using this device.
- M.T.H. recommends that all users and persons supervising use examine the hobby transformer and other electronic equipment
periodically for conditions that may result in the risk of fire, electric shock, or injury to persons, such as damage to the primary cord,
plug blades, housing, output jacks or other parts. In the event such conditions exist, the train set should not be used until properly
repaired.
- Do not operate your layout unattended. Obstructed accessories or stalled trains may overheat, resulting in damage to your layout.
- This train set is intended for indoor use. Do not use if water is present. Serious injury or fatality may result.
- Do not operate the hobby transformer with damaged cord, plug, switches, buttons or case.
Recommended for Ages 14 and up. Not recommended for children under 14 years of age without adult supervision.
As with all electric products, precautions should be observed during handling and use to prevent electric shock.
TABLE OF CONTENTS
UNPACKING YOUR ENGINE ...................................................................................4
Removing and Unwrapping Your Engine .........................................................................................4
What Else is in the Box? ......................................................................................................................4
PRODUCT OVERVIEW...............................................................................................5
Getting to Know Your Engine............................................................................................................5
Engine Diagram.....................................................................................................................................7
DCC-DCS Switch..................................................................................................................................7
SET-UP ..........................................................................................................................8
Couplers..................................................................................................................................................8
Lubrication .............................................................................................................................................8
Traction Tire Replacement...................................................................................................................9
MODES OF OPERATION .........................................................................................10
FEATURES AND OPERATION................................................................................11
Conventional AC.................................................................................................................................11
Analog DC (standard DC power pack) ...........................................................................................11
DCS Digital Command System.........................................................................................................13
Running Your Engine .............................................................................................................13
Speed Control ..........................................................................................................................14
Sounds.......................................................................................................................................14
Lighting .....................................................................................................................................14
15
Basic DCC Operation.........................................................................................................................15
Start-Up/Shut-Down..............................................................................................................16
Sounds.......................................................................................................................................16
PFA............................................................................................................................................16
Lights.........................................................................................................................................17
Forward/Reverse Signal .........................................................................................................17
Engine Sounds .........................................................................................................................18
Additional F Functions...........................................................................................................18
F-Function Chart ...............................................................................................................................20
23
23
33
SPECIFICATIONS......................................................................................................35
CARE AND MAINTENANCE...................................................................................36
Troubleshooting Guide ......................................................................................................................36
Power Supply Charts (AC+DC)........................................................................................................43
SERVICE & WARRANTY INFORMATION ...........................................................44
DCC DIGITAL COMMAND CONTROL ..................................................................
Cv29 ......................................................................................................................................................21
Feature/Factory Reset ........................................................................................................................22
Advanced DCC Operation ................................................................................................................
Configuration Variables......................................................................................................................
Motorola – Marklin 6021 Controller...............................................................................................25
Advanced Consisting ..........................................................................................................................30
Programming Track ............................................................................................................................
Service & Warranty Information ......................................................................................................44
Limited One-Year Warranty ..............................................................................................................44
Rev: _80dl19548i_HO ES44 Diesel Ps3E+ 10/9/14
QUICK START GUIDE
Of course, you should read your manual over before running your engine.
But if you just can’t wait, choose how you want to run below and enjoy!
Now, after a few minutes, shut her down and read through your engineer’s
guide.
CAUTION: M.T.H. PS3E+ HO engines OPERATE ON AC VOLTAGE
and are designed to operate on HO 3-Rail Stud-rail track.
I USE AN AC SUPPLY…
Step 1: Unpack your Engine. (refer to unpacking instruction on pg 4)
Step 2: Set the engine on the track
Step 3: Apply increasing AC voltage until she starts up and pulls out!
I USE A REGULAR DC SUPPLY…
Step 1: Unpack your Engine. (refer to unpacking instruction on pg 4)
Step 2: Set the engine on the track
Step 3: Apply increasing DC voltage until she starts up and pulls out!
I'M A DCC/MOTOROLA OPERATOR…
Step 1: Unpack your Engine. (refer to unpacking instructions on pg 4)
Step 2: Set the engine on the track
Step 3: Power up your DCC system
Step 4: Select engine address 3 and press “F3” to start her up
Step 5: Turn the throttle and head on down the pike
I RUN DCS…
Step 1: Unpack your Engine. (refer to unpacking instructions on pg 4)
Step 2: Set the engine on the track
Step 3: Power up your DCS system
Step 4: Add the engine to your system and start her up
Step 5: Turn the throttle and move out
* Please note, when making setting changes in DCS or DCC, such as address, please
wait a minimum of 5 seconds after removing power to insure the settings are stored
in the engines memory. Reapplying power in less than 5 seconds may result in losing
the setting changes.
M.T.H. HO ES44AC PS3E+ Diesel Engine
3
WHAT IS ‘MOTOROLA?’
You will see the term Motorola when referring to DCC a lot in this manual,
because...well Motorola is essentially 99% DCC (there are only really a few
functions that are specific to motorola). Motorola is primarily used for DCC
functions on 3-Rail Engines in Europe, and is most frequently used with a
Marklin controller. Chances are, if you are using Motorola you already know it.
Otherwise just stick to DCC if that is what you are operating!
UNPACKING YOUR ENGINE
Removing and Unwrapping Your Engine
Carefully remove and unwrap the model on a soft surface. By nature, models with
high levels of detail have some small fragile parts.
Carefully remove any foam packing pieces that may be surrounding the model.
What Else is in the Box?
The following items are packed with your engine.
Engineer's Guide (1)
Replacement Traction Tires (4)
Your locomotive is equipped with two neoprene rubber traction tires on each
powered truck block. While these tires are extremely durable, you may need to
replace them at some point.
M.T.H. HO ES44AC PS3E+ Diesel Engine
4
PRODUCT OVERVIEW
Getting to Know Your M.T.H. HO Locomotive
Key Features
Your new HO Diesel Engine is equipped with the exclusive M.T.H. Proto-Sound®
3.0E+ digital sound and control system. In plain English, this means your
locomotive contains state-of-the-art electronics providing realistic digital sounds,
precisely controlled speed in increments of 1 scale mile per hour and much more.
Compatibility
The Proto-Sound 3E+ system is universally compatible with track power and/or
signal combinations including analog AC, analog DC (regular DC power pack),
DCC/Motorola (NMRA Digital Command Control), or DCS (MTH Digital
Command System). Simply set your Engine on the rails, flip the DCS/DCC switch
to the mode you want to run, apply any one of these power/signal sources, and
move out! A vast array of realistic operation is automatic when the Engine is run
on analog AC or analog DC. You can expand access to features in a DCC
environment. Experience the most your new locomotive has to offer in the
simple to use yet powerful world of DCS. To be clear, DCS is NOT a
proprietary version of DCC, as some other manufacturers offer. DCS is a
comprehensive layout control system designed with one primary goal: make
model trains do amazingly realistic things using a simple and intuitive
controller. We put the complexity on the inside, and the fun in your hands!
Digital Sound
Your Proto-Sound 3.0E+ (PS3E+) equipped engine contains over 100 individual
recordings. These recordings are played back dynamically at appropriate times to
create a symphony of realism for your ears. Hear the diesel roar automatically
intensify or lighten when speeding up or slowing down, listen to the sounds of
brakes squeaking and squealing as you come to a stop, or enjoy the random
conversations of railmen working as your model sits at idle. It’s all there and it’s
incredible.
Your HO diesel includes built-in realistic horn sound effects, including forward
(two blasts) and reverse (three blasts) signaling and crossing signal sounds, all
available with one-touch control from a DCS controller or through any DCC
controller capable of accessing up to F28.
M.T.H. HO ES44AC PS3E+ Diesel Engine
5
Digital Control
In standard analog AC or analog DC mode, your model still operates under digital
control. The PS 3E+ advance speed control system converts track voltage into
digital speed commands. Your model will run smoothly and consistently at any
speed regardless of load, hills, or curves. If you are a DCC/Motorola user,
you'll quickly learn to appreciate the precision of our speed control and linear
speed curve. DCS users will enjoy the added benefits of controlling speeds in
increments of 1 scale mile per hour displayed on DCS controllers or easily
changing acceleration and deceleration rates independently without any discussion
of bits or bytes. To be clear, DCS is NOT DCC.
Lights
As you read on, you'll notice there are no instructions for replacing light bulbs
in your diesel. That's because there aren't any. We use specially designed and
controlled LEDs to create realistic lighting effects that occur automatically.
Again, NO PROGRAMMING!! Just come to a stop and watch as the headlight
dims automatically in accordance with rule 17. Of course, as you pull away,
the headlight returns to it's fully bright, yet warm, glow. We even included a light
in the cab so the engineers can see to do their jobs!
More…
In analog DC operation, just flip the track polarity or direction switch at any speed
and watch your Engine gradually come to stop, turn on the appropriate directional
lighting, and smoothly accelerate back up to speed. No other HO locomotive has
features like these. There are so many more things to learn and enjoy about M.T.H.
HO Engines, we could write a book. But, that's no fun. So, if you haven't already
done so, flip to the Quick Start Guide and let's run your new engine!!
M.T.H. HO ES44AC PS3E+ Diesel Engine
6
ENGINE DIAGRAM
Locomotive
M.T.H. HO ES44AC PS3E+ Diesel Engine
7
All wheels Powered
Detailed Horn
Metal See-Through Fan Vents
Accessing the controls
DCC-DCS Switch
DCC-DCS Switch
If you remove the fan vent at the rear of the engine (as shown
above), you will find your DCC-DCS Switch, and volume
Potentiator. As a factory default, the switch is set to the DCC
position. To operate the engine in DCS mode, ensure the
switch is set to DCS. If you wish to run the engine in DCC
mode, ensure the switch is set to DCC. If you inadvertently
leave the switch in DCC it won’t hurt anything, you just won’t
be able to communicate with your engine with your DCS
system. Likewise, if you leave the switch in DCS and try to
operate the engine under DCC you may notice a humming
coming from your engine and you will likely notice that your
DCC system’s overload light will be on.
Control Hatch
To remove the Control Hatch, gently pull it
outward and lift it off from the side.
Volume Potentiator
NEM 360/362 coupler
Lubrication
Using light machine or household oil, apply a very small amount to all axles
points as shown.
Your gearbox is properly greased at the factory and probably never needs service
however, if you run excessive hours pulling heavy loads, it's a good idea to
remove the gearbox cover and re-grease using M.T.H. gear grease or equivalent.
To remove the gearbox cover, snap it off from one of the ends.
M.T.H. HO ES44AC PS3E+ Diesel Engine
8
SET-UP
Lubricate Axles (L)
Lubricate Axles (L) Gearbox Cover
Couplers
This engine comes equipped with a NEM 362 coupler pocket and NEM 360
couplers. If you do not wish to use the NEM 360 coupler you can use any
coupler that fits the standard NEM 362 coupler pocket.
Traction Tire Replacement
Your locomotive is equipped with two neoprene rubber traction tires on each
powered truck block. While these tires are extremely durable, you may need to
replace them at some point.
1. First, remove the gearbox cover from the truck block. To do this, turn your
engine upside down and
2. Pull apart the truck sides from the truck block in order to remove the drive
wheel (see photo above).
3. Make sure the old tire has been completely removed from the groove in the drive
wheel, using a razor blade or small flathead screwdriver to pry away any remains.
4. Slip the new tire onto the wheel. You may find it useful to use two small flathead
screwdrivers to stretch the tire over the wheel.
5. If you twist the tire while stretching it over the wheel, you will need to remove
and reinstall the tire. Otherwise your engine will wobble while operating.
6. Make sure the tire is fully seated inside the groove. Use a razor blade to trim
away any excess tire that doesn’t seat itself inside the groove properly.
7. Reassemble in reverse order.
One set of replacement tires is packaged with the model. Additional tires are
available directly from the M.T.H. Parts Department.
Order online: www.mthtrains.com
E-mail: parts@mth-railking.com
Phone: 410-381-2580
Fax: 410-423-0009
Mail: 7020 Columbia Gateway Drive, Columbia MD 21046-1532
snap it off from one of the ends.
SET-UP
M.T.H. HO ES44AC PS3E+ Diesel Engine
9
Separate the truck sides
in order to free the drive wheel
Gearbox cover
MODES OF OPERATION
There are 4 modes of operation with different levels of features accessible in each.
We refer to them as Conventional AC, DC, DCS, and DCC/Motorola. Here's a
little more explanation before we get into the features of each mode.
Analog DC
This is when there is nothing connected to the rails except a conventional DC
power pack. These power packs generally have at least one variable output
controlled by a throttle of some sort and a means of reversing DC polarity on the
track to change the direction of your engine.
DCS or Digital Control System
While the acronyms are close, this is about where the similarities between DCS and
DCC end. Yes, they are both digital control systems, however, M.T.H. DCS is
NOT DCC. There are several proprietary versions of DCC on the market, but this
is NOT one of them. M.T.H.'s DCS system is proven technology in the O and
One gauge markets and now, we've brought its power and simplicity it to you.
First, the power signal in DCS is NOT the command signal. Next, DCS employs a
fully functional bi-directional communication scheme opening a vast range of
advanced features and yet, is so simple and intuitive, you can enjoy them! No
programming tracks, bits and bytes, or conversion of binary to hexadecimal
numbers here! To add an engine in DCS, just press “ADD ENGINE.” After that,
If you want to start your engine, just press “START UP” or, to turn the sound on
or off, just press “SOUND.” No combinations of letters or numbers to remember!
We think you're really going to like this!
Please note, when making setting changes in DCS or DCC, such as address, please
wait a minimum of 5 Seconds after removing power to ensure the settings are
stored in the engines memory. Reapplying power in less than 5 seconds may result
in losing the setting changes.
DCC/Motorola or Digital Command Control
DCC/Motorola is a popular digital command control scheme wherein the track
power is also a digital control signal. That is, using a DCC/Motorolla controller,
you can communicate with multiple engines and have them all moving at different
speeds or moving in opposite directions on the same track at the same time. The
power/command signal remains constant and engines are “commanded” to
perform as desired. M.T.H. is new to DCC/Motorola but, we recognize it's
importance to many HO operators. So, we loaded our engine with more DCC
features easily accessible to the operator than any HO engine ever built previously.
You DCC/Motorola guys are in for a real treat!
Please note, when making setting changes in DCS or DCC,/Motorola such as
address, please wait a minimum of 5 seconds after removing power to ensure the
settings are stored in the engines memory. Reapplying power in less than 5 seconds
may result in losing the setting changes.
Conventional AC
When using conventional AC power, the engine will respond to changes in track
voltage. An increase in track voltage will increase the locomotive speed and a
reduction in track voltage will reduce the engine speed.
M.T.H. HO ES44AC PS3E+ Diesel Engine
10
Inhaltsverzeichnis
Andere MTHTrains Motor Handbücher
MTHTrains
MTHTrains F-3 POWERED B-UNIT Kurzanleitung
MTHTrains
MTHTrains Rail King VO-1000 Bedienungsanleitung
MTHTrains
MTHTrains Dash-9 Kurzanleitung
MTHTrains
MTHTrains HO Bi-Polar Kurzanleitung
MTHTrains
MTHTrains HO 4-8-4 GS-4 Kurzanleitung
MTHTrains
MTHTrains HO 2-6-6-6 Allegheny Kurzanleitung
MTHTrains
MTHTrains HO 4-8-2 Mohawk Kurzanleitung
MTHTrains
MTHTrains HO Union Pacific Kurzanleitung
MTHTrains
MTHTrains Rail King RS-1 Bedienungsanleitung
MTHTrains
MTHTrains Premier ALP 46 Bedienungsanleitung
