MTS Systems TFIR-31LAN series Bedienungsanleitung
Operation Manual
TFIR-31LAN series
TFIR-31LAN / -31LAN-H
Fixed mount 1D/2D Image Reader
2012/06/13
1
st Edition
Update Information
Edition Date Update Contents
1st edition 2012/06/13 New release
- 1 -
- 2 -
Introduction
Thank you for purchasing this product.
This manual explains the specifications, setup, Installation, features, operation, and
system configuration, of the TFIR-31LAN series image reader.
In order to use the product properly, please read this manual carefully.
If any problems are encountered during normal use, please document it carefully to
ensure our support team can accurately reproduce the situation.
The contents of this manual may change without notice. Please check our website
for the most current version.
Safety notices
DO NOT disassemble. Disassembly will void the warranty and could cause damage
or personal injury.
Ensure to follow all warnings or notices displayed by the host computer.
If smoke or odors begin to emit from the product, stop using and disconnect the unit
immediately.
- 3 -
DO NOT use AC adapters other than the one recommended. Adapters with differing
voltage or polarity may damage the unit.
MARS TOHKEN SOLUTION products are not designed or intended for the use as a
component in life support appliances or as surgical implants nor in any other
application where failure of the product could cause personal injury or death. The
use of MARS TOHKEN SOLUTION products shall indemnify and hold harmless to
MARS TOHKEN SOLUTION’s and its shareholders against any claims of injury or
death associated with unintended authorized use.
Handle with care
¾DATA BACKUP
This product has a memory backup function. This backup data restoration cannot be
guaranteed if repair, reconstruction, or upgrades are performed on this product.
¾DO NOT use this product at temperature or humidity ranges beyond that documented
in the product specifications, or in direct sunlight.
¾DO NOT expose this product to water, moisture, oil, etc.
¾This product may be damaged in environments containing corrosive gas.
¾DO NOT use any chemicals when cleaning.
To clean the reading window, please follow the steps below:
- Wipe lightly with cloth or swab (may be damp with alcohol).
- Wipe off any residual alcohol using a dry cloth.
- 4 -
¾This is a high-precision optical device, avoid exposing this product to excessive force
such as that sustained by a drop.
Do not install electrical wiring or plugin/unplug of cable (except LAN cable) when this
product is powered on. These may result in an electrical damage to this product.
Locations for operation and storage
Avoid the following locations that could cause an accident or damage to the product.
- Exposed to ambient temperature outside the rating
- Exposed to relative humidity outside the rating
- Exposed to rapid temperature fluctuations (causing condensation)
- Exposed to direct sunlight or near heaters
- Exposed to direct vibration or shock
- In the presence of dust, salt, or iron particles
- In environments where static electricity can build into siginificant charges
- In the presence of flammable or explosive gases
- In the presence of corrosive gas
Long-term storage
Store away from direct sunlight and direct vibration or shock for long term storage.
Do not store this product at temperature or humidity ranges beyond that documented
in the product specifications.
- 5 -
Unpacking
Before unpacking the TFIR-31LAN series image reader check that there has been
no damage to the packaging.
Check that the box includes the items listed below. If any items are missing or
damaged, please contact your local sales representative.
Included items
Item Qty
TFIR-31LAN series image reader 1 pcs
- 6 -
Table of Contents
INTRODUCTION......................................................................................................................... 2
SAFETY NOTICES...................................................................................................................... 2
HANDLE WITH CARE................................................................................................................3
LOCATIONS FOR OPERATION AND STORAGE .................................................................... 4
LONG-TERM STORAGE............................................................................................................. 4
UNPACKING ............................................................................................................................... 5
1OVERVIEW........................................................................................................................... 9
1.1 SUPPORTED SYMBOLOGIES........................................................................................... 10
1.2 PRODUCT DESCRIPTION ............................................................................................... 11
2CONFIGURATION............................................................................................................. 17
2.1 PREPARATION ............................................................................................................... 17
2.2 READING FLOW............................................................................................................. 18
2.3 COMMUNICATION PORT SELECTION (RS232C, LAN) ................................................... 19
2.4 CONFIGURATION........................................................................................................... 19
2.5 TRANSFER IMAGE DATA ................................................................................................ 19
3OPERATION MODE .......................................................................................................... 20
3.1 SINGLE READING MODE............................................................................................... 21
3.2 READING TIMEOUT MODE ............................................................................................ 23
3.3 EXTERNAL TRIGGER MODE .......................................................................................... 27
3.4 CONTINUOUS READING MODE ..................................................................................... 29
3.5 TEST MODE .................................................................................................................. 29
3.6 CYCLE BUFFER FUNCTION ........................................................................................... 30
3.7 AUTOSENSE MODE ....................................................................................................... 31
4CONFIGURATION FOR SYMBOL READING................................................................. 36
4.1 CONFIGURATION PARAMETERS..................................................................................... 36
4.2 CAMERA CONTROL MODE............................................................................................. 39
4.3 DETAIL OF TABLE MODE .............................................................................................. 41
5ADVANCED FUNCTIONS ................................................................................................ 43
5.1 PRESET MODE .............................................................................................................. 43
5.2 OUTPUT ADDITIONAL INFORMATION............................................................................. 47
- 7 -
5.3 SAVE IMAGE ................................................................................................................. 52
5.4 OUTPUT TRACE INFORMATION...................................................................................... 55
5.5 AUTOMATIC TUNING FOR CAMERA SETTINGS................................................................ 61
6LAN(TCP/IP) CONNECTION ............................................................................................ 62
6.1 PREPARATION ............................................................................................................... 62
6.2 CONFIGURE IP ADDRESS .............................................................................................. 62
6.3 DEFAULT SETTINGS ...................................................................................................... 63
6.4 CHECK FOR LAN SETTINGS.......................................................................................... 65
6.5 CONNECT TO LAN........................................................................................................ 66
6.6 MANAGE COMMUNICATION STATUS .............................................................................. 66
6.7 SERIAL COMMAND FOR LAN SETTINGS ........................................................................ 67
6.8 INITIALIZE LAN SETTINGS ........................................................................................... 68
7SERIAL COMMAND (RS232C, LAN)................................................................................ 69
7.1 COMMUNICATION ......................................................................................................... 70
7.2 SYMBOLOGIES .............................................................................................................. 71
7.3 SYMBOL READING ........................................................................................................ 79
7.4 CAMERA CONTROL (1) (FOR FIXED GAIN AND AUTOMATIC GAIN CONTROL MODE)..... 81
7.5 CAMERA CONTROL (2) (FOR TABLE MODE) .................................................................. 82
7.6 CAMERA CONTROL (3) (FOR TABLE MODE) .................................................................. 82
7.7 DEFAULT TABLE SETTINGS (*)...................................................................................... 83
7.8 IMAGE PREPROCESSING ............................................................................................... 84
7.9 PRESET MODE .............................................................................................................. 85
7.10 CONFIGURATION REFERENCE....................................................................................... 85
7.11 IMAGE OUTPUT,IMAGE SAVE ........................................................................................ 85
7.12 LAN SETTINGS............................................................................................................. 86
7.13 GENERAL OPERATION .................................................................................................. 86
7.14 TABLE OF CHARACTER CODE ........................................................................................ 87
8SPECIFICATIONS ............................................................................................................. 88
8.1 DIMENSIONS................................................................................................................. 90
8.2 INTERFACE ................................................................................................................... 91
8.3 READING RANGE .......................................................................................................... 93
9EXAMPLE OF CONFIGURATION DIAGRAM................................................................. 95
10 TROUBLESHOOTING ................................................................................................... 96
- 8 -
10.1 THE READER DOES NOT START UP OR CANNOT COMMUNICATE WITH A PC................... 96
10.2 SYMBOL CANNOT BE DECODED ..................................................................................... 97
10.3 FAIL TO COMMUNICATE THROUGH TCP/IP PROTOCOL ................................................. 98
10.4 AFTER GOOD READ,THE READER EMITS 7SHORT BEEPS A FEW SECONDS LATER. ....... 98
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Beliebte Kartenleser Handbücher anderer Marken
Rosslare
Rosslare DR-6255 Bedienungsanleitung
Lindy
Lindy 51541 Bedienungsanleitung
Diapro T?bbi Ürünler
Diapro T?bbi Ürünler Across System Bedienungsanleitung
Johnson Controls
Johnson Controls Kantech tyco ioSmart Bedienungsanleitung
ACS
ACS ACR122L Bedienungsanleitung
Secukey
Secukey S2-MF Bedienungsanleitung
