MTX PROXP-20-FS Bedienungsanleitung
MTX.COM
PROXP-20-FS
POLARIS®RZR®PRO XP FRONT SPEAKER PODS
OWNER’S MANUAL
MTX.COM
2
THANK YOU
Thank you for making the AWESOME decision to purchase our MTX Audio 6.5" weatherproof
speakers for your Polaris®RZR®Pro XP. With a few simple tools from your trusty toolbox you’ll have
these installed in no time. The rotationally molded enclosures are built as a single piece, designed to
take years of abuse without failure and they install quickly with only minor disassembly of the vehicle.
And of course, who can forget the integrated RGB lighting in the speakers, because, who doesn’t like
things that light up, right? So, congratulations on your purchase, thanks for your support and most
importantly, enjoy the ultimate audio experience with MTX!
WE’RE HERE TO HELP
We’re here to help with any installation or technical support. Visit mtx.com to chat, call
1-800-225-5689 to speak with an MTX Technical Support representative, or visit
youtube.com/user/MTXAudioUSA to view product videos.
DON’T FORGET TO REGISTER YOUR PRODUCT
Don’t forget to register your new MTX Audio product. Visit mtx.com/productregistration or scan the
QR code to the right.
Model #
Serial #
Dealer’s Name
Date of Purchase
IMPORTANT NOTICE
Whenever working on the vehicle, it is recommended to disconnect the battery prior to starting work.
Failure to do so may lead to a risk of electric shock or equipment damage.
When connecting power and ground wires ensure that the red power wire is fused at the point
where it is connected to the vehicle’s battery. Failure to do so can result in damage to the vehicle if a
short circuit develops between the vehicle connection point and the product.
MTX.COM 3
FEATURES
Tweeter:
• Teteron Dome Tweeter for High Output and Accurate Audio Reproduction
• Adjustable Tweeter Attenuation for Fine Tuning of Output
• Tweeter Mounts in OEM Factory Housing
Midrange:
• Fully Assembled and Prewired Enclosure
• Installer Friendly Enclosure Design for Easy Installation
• Integrated RGB Lighting
• Mounts Behind Factory Grille Maintaining OEM Cosmetics
• Utilizes Factory Mounting Assembly
• Compatible with OEM or MTX Subwoofer Installed
SPECIFICATIONS
• RMS Power Handling: 75-Watts
• Peak Power Handling: 150-Watts
• Sensitivity (2.83V/1m): 92dB
• Sensitivity (1W/1m): 87.6dB
• Frequency Response: 70Hz - 20kHz
• Impedance: 3.4Ω
FIT GUIDE
Pro XP / XP4 Sport .................................................................................................................................2021 - 2022
Pro XP / XP4 Premium...........................................................................................................................2020 - 2022
Pro XP / XP4 Ultimate............................................................................................................................2020 - 2022
Pro XP / XP4 Sport RFLE...................................................................................................................................2021
Pro XP / XP4 Ultimate RFLE .............................................................................................................................2021
IN THE BOX
• PROXP-20-FS Speaker Pods and Tweeters
• Mounting Hardware
(2) Mounting Brackets, (1) per Enclosure
(2) T30 Torx Course Thread - 20mm Long
(4) T20 Torx Course Thread - 15mm Long
(8) T20 Torx Course Thread - 29.5mm Long
(8) Zip Ties
MTX.COM
4
DISASSEMBLY
Step 1 - Remove the speaker grille by removing two (2) T-40 TORX bolts.
Note: For vehicles that have the OE speaker pods installed follow these additional steps for removal.
Step 2 - Remove four (4) T-25 screws found around the front of the speaker.
Step 3 - Remove two (2) T-27 screws found at the back of the speaker pod on the rewall.
MTX.COM 5
Step 4 - Remove one (1) T-40 Bolt from the inside fender well.
Step 5 - Disconnect the speaker pod plug and remove the pod from the vehicle.
Step 6 - Repeat this process on the other side.
Step 7 - With the pods removed, reinstall the T-40 TORX bolt into the fender well location.
Step 8 - Repeat process for other side of the vehicle.
MTX.COM
6
Step 9 - Disengage the speaker pod from the top of the dash/ fender panel and slide up the cage tube.
Step 10 - Press the dummy plug or OE tweeter if installed from the front and remove from the
enclosure from the rear.
MTX.COM 7
Step 11 - If OE tweeter is installed, disconnect the harness connector.
Step 12 - Repeat process for other side of vehicle.
MTX.COM
8
INSTALLATION
Step 13 - Locate and install the rear support brackets as shown using the supplied four (4) 15mm T-20
TORX screws.
Step 14 - Placing the Speaker enclosure against the dash housing from the rear and holding it in
place, loosely install four (4) 30mm T-20 TORX screws from the front into the enclosure housing in the
predrilled holes.
MTX.COM 9
Step 15 - Align the rear support bracket with the factory screw location in the rewall and install one
(1) T-27 TORX screw and tighten.
Step 16 - Tighten the four (4) screws on the front of the enclosure.
Step 17 - Feed the tweeter harness connector up through the top of the dash.
Step 18 - Repeat process for the other side of the vehicle.
MTX.COM
10
Step 19 - Prior to installation, choose your tweeter attenuation preference, 0dB or -6dB, by moving
the jumper found on the back of the tweeter housing.
Step 20 - Locate and align the key on the body of the tweeter pod to the slot molded into the tweeter
opening on the factory housing.
Step 21 - Press the tweeter into the opening from behind until the grille is seated ush with the front
of the enclosure.
Inhaltsverzeichnis
Andere MTX Sprecher Handbücher
MTX
MTX 822CM Bedienungsanleitung
MTX
MTX RNGRPOD65 Bedienungsanleitung
MTX
MTX MUD65PL Bedienungsanleitung
MTX
MTX 512C Bedienungsanleitung
MTX
MTX Blueprint 510CM Bedienungsanleitung
MTX
MTX MUD65PL Bedienungsanleitung
MTX
MTX THUNDER PRO TP1100 Bedienungsanleitung
MTX
MTX Thunder AXE TX6001 Bedienungsanleitung
MTX
MTX Blueprint 520C Bedienungsanleitung
MTX
MTX MONITOR5i Bedienungsanleitung
MTX
MTX Blueprint 512C Bedienungsanleitung
MTX
MTX Blueprint 602W Bedienungsanleitung
MTX
MTX MP52B Bedienungsanleitung
MTX
MTX Blueprint H615W Bedienungsanleitung
MTX
MTX iP3 Bedienungsanleitung
MTX
MTX Blueprint 625W Bedienungsanleitung
MTX
MTX SS7 Bedienungsanleitung
MTX
MTX CT2525LCR Bedienungsanleitung
MTX
MTX CD520C Bedienungsanleitung
MTX
MTX Blueprint 502W Bedienungsanleitung
Beliebte Sprecher Handbücher anderer Marken
Bowers & Wilkins
Bowers & Wilkins 4 Bedienungsanleitung
Sonance
Sonance SONOS OUTDOOR Series Bedienungsanleitung
Electro-Voice
Electro-Voice EVID FM4.2 Bedienungsanleitung
Pioneer
Pioneer XW-HTD630 Bedienungsanleitung
Onn
Onn BWA16AA002 Bedienungsanleitung
HP
HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung