Muddy MTC-150 Bedienungsanleitung
Muddy MTC-150
Instruction Manual
R1
Page 2
To ensure the product is being utilized to its full potential, we recommend checking
our website for new product updates. If your camera is having an issue, please check
our website to determine you are using the latest rmware or software version.
Notice
TECHNICAL SUPPORT
EMAIL:
Please allow 48 hours for email
response.
GSM, LLC
P.O. Box 535189
Grand Prairie, TX 75053-9504
CUSTOMER SERVICE
CONTACT & HOURS
Toll Free: 877-269-8490
CALL CENTER HOURS
Mon – Fri / 8 AM – 5 PM (CST)
WEBSITE
www.gsmoutdoors.com
Contact Us
Page 3
Contents
About Your Camera 4
Quick Setup Guide 5
Camera Overview 6
Camera Setup 8
Camera Conguration 9
Camera Conguration cont. 11
Viewing and Deleting Images 12
Frequently Asked Questions 13
Camera Care 14
Limited Warranty Information 16
Page 4
About Your Camera
50 Foot Detection and Flash Range
See further with long-distance PIR sensor and LEDs.
1.6 Second Trigger Speed
Never miss a shot with lightning fast 0.7 second trigger speed.
Water Resistant Design
Your camera is safe against the elements with a sturdy
waterproof housing design.
Durable Housing
Be condent in the longevity of your camera with veried durable
housing.
12 IR LEDs
Perfectly illuminate your nighttime photos with 18 IR LED lights.
Page 5
Quick Setup Guide
Insert Batteries and SD Card
Install 8 AA batteries and a class 10 SD card into camera.
Mount Camera
Mount the camera at the desired location using the strap
mount, Python Lock cable, Articulating Ball Joint Mount, or
other desired mounting mechanism. Position the camera so
that it does not face East or West directly as the rising and
setting of the sun can cause false positive triggers.
Activate Camera
Set camera to desired Quick Set (QSET) or to custom
conguration and place in desired vantage point to start
capturing photos of game.
Page 6
Camera Overview
Menu Down Up Enter
Mode Switch
MENU ENTER
Universal
¼ - 20 thread
SD Card
Slot
Battery
Release Switch
Page 7
Python Cable
Lock Hole
Strap
Mounts
Universal
¼ - 20 thread
Page 8
Camera Setup
Battery Installation
To remove batteries from unit, simply open camera, and slide the
battery release switch to the left. Once the battery compartment is
open, insert batteries into camera, being careful to match the orien-
tation marked on your camera. After batteries are inserted, close the
battery compartment and secure the battery release switch.
SD Card Installation
SD card slot is located on the
bottom of the camera, above the
battery compartment. Insert SD
card with the label facing back of
camera. Only minimal resistance
should be felt as card is inserted
and a click when the card is fully
inserted.
Page 9
Camera Conguration
This camera features 4 distinct modes of operation:
QSET 1 | QSET 2 | CUSTOM |.
Each setting is activated based upon the position of the switch inside the unit.
O
QSET 1
QSET 2
Custom
MENU ENTER
Name Type Quality Timeout
Delay Detail
QSET 1 Photo Medium 30 sec 3 Photos
QSET 2 Video 640x480 30 sec 10 sec video
Quick Sets
Once selected, the screen will display the Quick Set (QSET) that has been
chosen and then count down from 9to 0 seconds. When countdown has
been completed camera is ready and in an active state.
See table for breakdown of Quick Set modes.
Page 10
Custom Conguration
The CUSTOM setting on your camera allows you to customize every
setting to t your exact needs. To begin, move the slider to the CUSTOM
position and press the menu button on the camera.
Once inside the custom settings menu, use the Up and Down arrows to
scroll through the dierent settings. To change a setting that is displayed,
press the Enter key and the setting will begin ashing. At this point use
the Up and Down arrows to change the setting. When nished press the
Enter button to save the change or press Menu to cancel change.
When you are nished conguring your camera’s settings, press the
Menu button to return your camera to an active state.
Inhaltsverzeichnis
Sprachen:
Andere Muddy Digitalkamera Handbücher
