MULTIQUIP G4100105 Leitfaden

OPERATION AND PARTS MANUAL

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

GloBug

MODEL GB43LED

LIGHTING SYSTEM

SERIAL NO. G4100105 AND ABOVE

Revision #2 (10/28/21)

Go to Discount-Equipment.com to order your parts

Discount-Equipment.com is your online resource for quality parts & equipment.

Florida: 561-964-4949 Outside Florida TOLL FREE: 877-690-3101

Need parts?

Click on this link: http://www.discount-equipment.com/category/5443-parts/ and

choose one of the options to help get the right parts and equipment you are looking

for. Please have the machine model and serial number available in order to help us

get you the correct parts. If you don’t find the part on the website or on one of the

online manuals, please fill out the request form and one of our experienced staff

members will get back to you with a quote for the right part that your machine needs.

We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman,

Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto,

Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack,

Lull, Skytrak, Tsurumi, Husquvarna Target, Stow, Wacker, Sakai, Mi-T-M, Sullair, Basic,

Dynapac, MBW, Weber, Bartell, Bennar Newman, Haulotte, Ditch Runner, Menegotti,

Morrison, Contec, Buddy, Crown, Edco, Wyco, Bomag, Laymor, EZ Trench, Bil-Jax, F.S.

Curtis, Gehl Pavers, Heli, Honda, ICS/PowerGrit, IHI, Partner, Imer, Clipper, MMD, Koshin,

Rice, CH&E, General Equipment ,Amida, Coleman, NAC, Gradall, Square Shooter, Kent,

Stanley, Tamco, Toku, Hatz, Kohler, Robin, Wisconsin, Northrock, Oztec, Toker TK, Rol-Air,

APT, Wylie, Ingersoll Rand / Doosan, Innovatech, Con X, Ammann, Mecalac, Makinex, Smith

Surface Prep,Small Line, Wanco, Yanmar

PAGE 2 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)

PROPOSITION 65 WARNING

Go to Discount-Equipment.com to order your parts

PAGE 4 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)

TABLE OF CONTENTS

GB43LED Lighting System

Proposition 65 Warning ........................................... 2

Table of Contents..................................................... 4

Safety Information ............................................... 5–9

Speciﬁcations ........................................................ 10

Dimensions............................................................ 11

Footcandle Plot...................................................... 12

General Information............................................... 13

Components .................................................... 14–15

Setup ............................................................... 16–18

Operation............................................................... 19

Storage............................................................ 20–21

Maintenance.................................................... 22–23

Troubleshooting ............................................... 24–25

Wiring Diagram...................................................... 26

Explanation of Code in Remarks Column.............. 28

Suggested Spare Parts ......................................... 29

Component Drawings

Nameplate and Decals .................................... 30–31

Base Plate Assembly....................................... 32–33

LED Lamp Assembly....................................... 34–35

Front Cover Assembly ..................................... 36–37

Cable and Switch Assembly ............................ 38–39

Main Mast Assembly ....................................... 40–41

T-Handle Assembly.......................................... 42–43

Steering Assembly........................................... 44–45

Outrigger Assembly......................................... 46–47

Mast Adapter Assembly................................... 48–49

Mast Section Assembly ................................... 50–51

NOTICE

Speciﬁcations and part numbers are subject to change

without notice.

Go to Discount-Equipment.com to order your parts

GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21) — PAGE 5

SAFETY INFORMATION

Do not operate or service the equipment before reading

the entire manual. Safety precautions should be followed

at all times when operating this equipment.

Failure to read and understand the safety

messages and operating instructions could

result in injury to yourself and others.

SAFETY MESSAGES

The four safety messages shown below will inform you

about potential hazards that could injure you or others.The

safety messages speciﬁcally address the level of exposure

to the operator and are preceded by one of four words:

DANGER, WARNING, CAUTION

or NOTICE.

SAFETY SYMBOLS

DANGER

Indicates a hazardous situation which, if not avoided,

WILL result in DEATH or SERIOUS INJURY.

WARNING

Indicates a hazardous situation which, if not avoided,

COULD result in DEATH or SERIOUS INJURY.

CAUTION

Indicates a hazardous situation which, if not avoided,

COULD result in MINOR or MODERATE INJURY.

NOTICE

Addresses practices not related to personal injury.

Potential hazards associated with the operation of this

equipment will be referenced with hazard symbols which

may appear throughout this manual in conjunction with

safety messages.

Go to Discount-Equipment.com to order your parts

PAGE 6 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)

SAFETY INFORMATION

GENERAL SAFETY

CAUTION



NEVER operate this equipment without proper protective

clothing, shatterproof glasses, respiratory protection,

hearing protection, steel-toed boots and other protective

devices required by the job or city and state regulations.



NEVER operate this equipment when not

feeling well due to fatigue, illness or when

under medication.



NEVER operate this equipment under the inﬂuence of

drugs or alcohol.



ALWAYS check the equipment for loosened threads or

bolts before starting.



DO NOT use the equipment for any purpose other than

its intended purposes or applications.

NOTICE



This equipment should only be operated by trained and

qualiﬁed personnel 18 years of age and older.



Whenever necessary, replace nameplate, operation and

safety decals when they become difﬁcult read.



Manufacturer does not assume responsibility for any

accident due to equipment modiﬁcations. Unauthorized

equipment modiﬁcation will void all warranties.

NEVER

use accessories or attachments that are not

recommended by Multiquip for this equipment. Damage

to the equipment and/or injury to user may result.

ALWAYS know the location of the nearest

ﬁre extinguisher.

ALWAYS know the location of the nearest

ﬁrst aid kit.

ALWAYS know the location of the nearest phone or

keep

a phone on the job site.

Also, know the phone numbers

of the nearest ambulance, doctor and

ﬁre department.

This information will be invaluable in the case of an

emergency.

Go to Discount-Equipment.com to order your parts

GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21) — PAGE 7

SAFETY INFORMATION

LIGHTING SYSTEM SAFETY

WARNING



NEVER disconnect any emergency or safety devices.

These devices are intended for operator safety.

Disconnection of these devices can cause severe injury,

bodily harm or even death. Disconnection of any of

these devices will void all warranties.

CAUTION



NEVER attempt service on a running machine.

NOTICE



To prevent the lighting system from overturning, NEVER

use in winds that exceed 40 mph.



The lighting system should only be used in temperatures

between 23° to 104°F (-5° to 40° C).



ALWAYS keep the lighting system in proper running

condition.



Fix damage to lighting system and replace any broken

parts immediately.



ALWAYS store equipment properly when it is not being

used. Equipment should be stored in a clean, dry location

out of the reach of children and unauthorized personnel.

LAMP SAFETY

WARNING

NEVER

attempt to replace lamp with the power on.

Always unplug the power cord from the generator or

power source when changing the lamp.

ALWAYS allow a sufﬁcient amount of time for the lamp to

cool

before changing. The possibility exists of severe burns.

CAUTION

NEVER

use force when installing the lamp.Excessive force

could cause the lamp to break, causing bodily harm.

NOTICE

NEVER

leave any grease or oil residue on lamp surface

when replacing or removing lamp. This can create hot

spots, reducing the service life of the lamp.

ALWAYS make sure lamp surface is clean and dry.

ALWAYS

replace with MQ recommended type lamp. See

parts section of this manual.

NEVER

unplug the lamp’s AC power cable during

operation.

ALWAYS have a trained technician

to install and

remove lamp or replace any damaged ﬁxture wiring.

Go to Discount-Equipment.com to order your parts

PAGE 8 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)

SAFETY INFORMATION

GENERATOR SAFETY

If using a generator to power lighting system,

refer to applicable generator manual safety

information section.

ELECTRICAL SAFETY

DANGER



Lighting system is equipped with a ground pin on the

power plug. For your protection, ALWAYS complete the

grounding path. NEVER insert the AC power plug into a

2-prong receptacle to operate lighting system.

When applying power to the lighting system,

ALWAYS

connect the AC power plug to a 3-prong receptacle that

is grounded. The possibility exists of electrical shock,

electrocution and even death if the lighting system is

not grounded.



NEVER operate lighting

system or handle any

electrical equipment while

standing in water, while

barefoot, while hands are wet

or in the rain. A dangerous

electrical shock could occur,

causing severe bodily harm

or even death.



ALWAYS make sure the area

above the lighting system is

open and clear of overhead

power lines and other

obstructions. Contact with

overhead power lines or other

obstructions could result in

equipment damage, electrical

shock, electrocution and

even death.

Power Cord/Cable Safety

DANGER

NEVER let power cords or cables lay in water.

NEVER use damaged or worn

cables or cords. Inspect

for cuts in the insulation

NEVER grab or touch a live power

cord or cable with wet hands. The

possibility exists of electrical shock,

electrocution or death.



Make sure power cables are securely connected.

Incorrect connections may cause electrical shock

and

damage to the lighting system.

NOTICE

ALWAYS

make certain that proper power or extension

cord has been selected for the job. See Cable Selection

Chart in this manual.

LOADING AND UNLOADING

Cart Type - With Liﬁting Hook

If lighting system is equipped with a transport lifting hook,

refer to the following safety information.

CAUTION



Before lifting, make sure that lighting system parts are

not damaged and screws are not loosened or lost.

ALWAYS

make sure crane or lifting device has been

properly secured to lifting hook of the equipment.

NEVER

lift the equipment while lighting system is

running.



Make sure the mast is completely lowered before lifting

the lighting system.



Use adequate lifting cable (wire or rope) of sufﬁcient

strength.

Go to Discount-Equipment.com to order your parts

GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21) — PAGE 9

SAFETY INFORMATION

Use one point suspension hook and lift straight upwards.



Never allow any person or animal to stand underneath the

equipment while lifting.



DO NOT lift machine to unnecessary heights.

Cart Type - No Liﬁting Hook

If lighting system is not equipped with a transport lifting

hook and the mast is removable, refer to the following

safety information.



The cart’s weight makes it prohibitive to be lifted by

individuals.



When transporting the lighting system, always fully

lower the mast assembly and place the 4 lamps in their

horizontal (stowed) position.

TRANSPORTING SAFETY

NOTICE



ALWAYS remove lamp assembly from the mast when

transporting lighting system. This will prevent damage

to the lamp due to vibration.

ACCIRCUIT

BREAKER

120/240V

30A

120V

30A 20A

20A

OFF

IDLE

CONTROL

OPERATION

SWITCH

OFF

FULLPOW E R

SWITCH

120V

120V/240V

120

OFF

21A

LIFTING

HANGER

LIFTING

SHACKLE

GENERATOR

LIFTING BALE

FORK LIFT

ALIGNMENT

ARROWS

(4 PLACES)

LIFTING

HOOK

Go to Discount-Equipment.com to order your parts

PAGE 10 — GB43LED GLOBUG • OPERATION AND PARTS MANUAL — REV. #2 (10/28/21)

SPECIFICATIONS

Table 1. Speciﬁcations

Model GB43LED

Input Voltage 120 VAC

Max. Current 11 Amps

Frequency 60 Hz

Appropriate Generator 2,500 Watts

Wind Stability with Generator 40 mph (64.37 kph)

Weight (less generator) 316 lbs. (143.33 kg)

Lamp

Lamp Type Four 300W LED

Lamp Material Polycarbonite Spotlight

Lumens 152,000

Lamp Life 40,000 hours

Plug Type NEMA 5-15P

Mast

Number of Stages 4

Maximum Height 17 ft. (5.2 meters)

Mast (Raise) Manual Winch

Cart

Cart Type Steel, Zinc-Plated

Outriggers 2

Wheels Four 11.8-inch (300 mm) Puncture-Proof

Brake System Mechanical

Generator (See Speciﬁed Generator Manual)

Go to Discount-Equipment.com to order your parts

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MULTIQUIP Beleuchtungsausrüstung Handbücher

MULTIQUIP

MULTIQUIP GloBug GB113BC Leitfaden

MULTIQUIP

MULTIQUIP GLOBUG GB12BW Leitfaden

MULTIQUIP

MULTIQUIP GloBug GB4000 Bedienungsanleitung

MULTIQUIP

MULTIQUIP MB1000 Bedienungsanleitung

MULTIQUIP

MULTIQUIP G3200105 Leitfaden

MULTIQUIP

MULTIQUIP GloBug GB43LED Bedienungsanleitung

MULTIQUIP

MULTIQUIP NIGHTHAWK LT 12P Bedienungsanleitung

MULTIQUIP

MULTIQUIP GLOBUG GBX12SK Bedienungsanleitung

MULTIQUIP

MULTIQUIP GLOBUG Series Leitfaden

MULTIQUIP

MULTIQUIP GLOBUG GBX24S Bedienungsanleitung

MULTIQUIP

MULTIQUIP G4100153 Leitfaden

MULTIQUIP

MULTIQUIP GBX24BK Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung