MULTIQUIP Diamond Back SP303516 Street Pro Leitfaden

OPERATION AND PARTS MANUAL

SP3 “STREET PRO”

PROFESSIONAL SLAB SAW

35 HP WISCONSIN DIESEL ENGINE

MODELS

SP303516, SP303520, SP303526

SP303530

Revision #3 (09/29/06)

THIS MANUAL MUST COMPANY THE EQUIPMENT AT ALL TIMES.

Diamond Back

To find the latest revision of this

publication, visit our website at:

www.multi

.com

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 1

MQ SP-3035 CONCRETE SAW

PROPOSITION 65 WARNING

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 2

MQ SP-3035 CONCRETE SAW

SILICOSIS /RESPIRATORY HAZARDS

Grinding/cutting/drilling of masonry, concrete, metal and

other materials with silica in their composition may give

off dust or mists containing crystalline silica. Silica is a

basic component of sand, quartz, brick clay, granite and

numerous other minerals and rocks. Repeated and/or

substantial inhalation of airborne crystalline silica can

cause serious or fatal respiratory diseases, including

silicosis. In addition, California and some other

authorities have listed respirable crystalline silica as a

substance known to cause cancer. When cutting such

materials, always follow the respiratory precautions

mentioned above.

WARNING

Grinding/cutting/drilling of masonry, concrete, metal and

other materials can generate dust, mists and fumes

containing chemicals known to cause serious or fatal

injury or illness, such as respiratory disease, cancer,

birth defects or other reproductive harm. If you are

unfamiliar with the risks associated with the particular

process and/or material being cut or the composition of

the tool being used, review the material safety data

sheet and/or consult your employer, the material

manufacturer/supplier, governmental agencies such as

OSHA and NIOSH and other sources on hazardous

materials. California and some other authorities, for

instance, have published lists of substances known to

cause cancer, reproductive toxicity, or other harmful

effects.

Control dust, mist and fumes at the source where

possible. In this regard use good work practices and

follow the recommendations of the manufacturers or

suppliers, OSHA/NIOSH, and occupational and trade

associations. Water should be used for dust

suppression when wet cutting is feasible. When the

hazards from inhalation of dust, mists and fumes cannot

be eliminated, the operator and any bystanders should

always wear a respirator approved by NIOSH/MSHA for

the materials being used.

WARNING

SILICOSIS WARNING RESPIRATORY HAZARDS

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 3

MQ SP-3035 CONCRETE SAW

Table of Contents

PROPOSITION 65 WARNING .......................................................................................1

SILICOSIS /RESPIRATORY HAZARDS......................................................................2

PARTS ORDERING PROCEDURES........................................................................... 6

SAFETY..............................................................................................................................7

HAZARD SYMBOLS.................................................................................................... 8

GENERAL SAFETY WARNINGS ....................................................................................... 11

BLADE SAFETY......................................................................................................... 13

SAW TRANSPORTATION SAFETY......................................................................... 14

EMERGENCIES .......................................................................................................... 14

MACHINE OPERATION AND SAFETY DECALS................................................... 15

SERIAL TAG ................................................................................................................... 16

OPERATION ...................................................................................................................17

BEFORE STARTING......................................................................................................... 17

CONTROL PANEL ........................................................................................................... 18

ENGINE POWER,CUTTING POWER &SHEAVE SIZE........................................................ 19

INSTALLING THE BLADE,BLADE GUARD &BLADE FLANGE ......................................... 20

REMOVING THE BLADE,BLADE GUARD &BLADE FLANGE........................................... 21

STACKING BLADES FOR WIDE CUTS.............................................................................. 22

INSTALLING AND REMOVING THE BLADE GUARD.......................................................... 23

WATER SUPPLY AND CONTROL ..................................................................................... 26

HANDLEBARS................................................................................................................. 27

FUELING THE SAW ......................................................................................................... 28

STARTING AND STOPPING THE ENGINE .......................................................................... 29

POINTER ADJUSTMENT .................................................................................................. 30

RAISE –LOWER CONTROLS ........................................................................................... 31

SETTING THE DEPTH GAUGE &DEPTH STOP ................................................................. 32

DRIVE SYSTEM .............................................................................................................. 33

NIGHT LIGHT ................................................................................................................. 36

TRANSPORTATION TIE-DOWNS AND LIFT POINT ............................................................ 37

OPERATION ON A SLOPE OR INCLINE.............................................................................. 38

FREEING A STUCK BLADE.............................................................................................. 38

DRAINING THE WATER SYSTEM..................................................................................... 39

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 4

MQ SP-3035 CONCRETE SAW

MAINTENANCE.............................................................................................................40

REMOVABLE GUARDS AND ACCESS PANELS.................................................................. 40

BELTS AND PULLEYS ..................................................................................................... 41

BLADE FLANGE REMOVAL/INSTALLATION .................................................................... 45

CIRCUIT BREAKERS ....................................................................................................... 50

MAXIMUM CUT DEPTH ADJUSTMENT............................................................................ 50

LUBRICATION ................................................................................................................ 51

ENGINE MAINTENANCE ................................................................................................. 52

RAISE-LOWER SYSTEM.................................................................................................. 53

CONTROL HANDLE ADJUSTMENT .................................................................................. 54

HYDRAULIC SYSTEM ..................................................................................................... 55

POSITRACTION ADJUSTMENT......................................................................................... 60

EXPLANATION OF CODE IN REMARKS COLUMN.............................................61

SUGGESTED SPARE PARTS.......................................................................................62

COMPONENT DRAWINGS..........................................................................................63

NAMEPLATE AND DECALS ASSY.................................................................................... 63

DECK/GAUGE PANEL ASSY. .......................................................................................... 65

CONSOLE/SHEET METAL ASSY...................................................................................... 67

ACCESS PANEL ASSY..................................................................................................... 69

FUEL TANK ASSY. ......................................................................................................... 71

F-N-R CONTROL HANDLE ASSY.................................................................................... 73

JOYSTICK MOUNTING ASSY........................................................................................... 75

LIFT PUMP CIRCUIT ASSY.............................................................................................. 77

WATER SYSTEM ASSY................................................................................................... 79

DEPTH INDICATOR ASSY................................................................................................ 81

HANDLE AND LIGHT ASSY............................................................................................. 83

FRONT/REAR POINTER ASSY. ........................................................................................ 85

GAUGES AND CONTROLS ASSY...................................................................................... 87

FRONT AXLE ASSY. ....................................................................................................... 89

DEPTH STOP ASSY......................................................................................................... 91

PLATFORM ASSY............................................................................................................ 93

DRIVE ASSY................................................................................................................... 95

BLADESHAFT AND MOUNTING ASSY. ............................................................................ 97

POSITRACTION ASSY...................................................................................................... 99

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 5

MQ SP-3035 CONCRETE SAW

PULLEY AND V-BELT ASSY......................................................................................... 101

BATTERY ASSY............................................................................................................ 103

ENGINE BRACKETS ASSY............................................................................................. 105

ENGINE INSTALLATION ASSY....................................................................................... 107

BLADEGUARD ASSY..................................................................................................... 109

OPTIONAL WATER PUMP KIT ASSY............................................................................. 111

COLLAR PULLER ASSY................................................................................................. 113

SEAL SLEEVE PULLER/SEAL INSTALLATION TOOL ...................................................... 115

BUSHING EXTENSION KITS .......................................................................................... 117

ELECTRIC SCHEMATIC...........................................................................................119

SPECIFICATIONS........................................................................................................120

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 7

MQ SP-3035 CONCRETE SAW

SAFETY

FOR YOUR SAFETY AND THE SAFETY OF OTHERS!



NOTE

This Owner's Manual has been developed to provide instructions for the

safe and efficient operation of the Multiquip SP-3035 CONCRETE SAW.

For engine maintenance information, please refer to the engine

manufacturers’ instructions for data relative to its safe operation.

Before using this CONCRETE SAW, ensure that the operating individual

has read and understands all instructions in this manual.

Safety precautions should be followed at all times when operating this equipment. Failure to read and

understand the Safety Messages and Operating Instructions could result in injury to yourself and others.

SAFETY MESSAGE ALERT SYMBOLS

The three (3) Safety Messages shown below will inform you about potential hazards that could

injure you or others. The Safety Messages specifically address the level of exposure to the

operator, and are preceded by one of three words: DANGER, WARNING, or CAUTION.

DANGER

DANGER: You WILL be KILLED or SERIOUSLY injured if you

DO NOT follow directions.

WARNING

WARNING: You CAN be KILLED or SERIOUSLY injured if you

DO NOT follow directions.

CAUTION

CAUTION: You CAN be injured if you DO NOT follow directions.

Potential hazards associated with SP-3035 Concrete Saw operation will be referenced with "Hazard

Symbols" which appear throughout this manual, and will be referenced in conjunction with Safety

"Message Alert Symbols".

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 8

MQ SP-3035 CONCRETE SAW

HAZARD SYMBOLS



Explosive Fuel

Gasoline is extremely flammable, and its vapors can cause an

explosion if ignited. DO NOT start the engine near spilled fuel or

combustible fluids. DO NOT fill the fuel tank while the engine is

running or hot. DO NOT overfill the tank, since spilled fuel could

ignite if it comes into contact with hot engine parts or sparks from

the ignition system. Store fuel in approved containers, in well-

ventilated areas and away from sparks and flames. NEVER use

fuel as a cleaning agent.

Burn Hazards

Engine components can generate extreme heat. To prevent

burns, DO NOT touch these areas while the engine is running or

immediately after operations. NEVER operate the engine with heat

shields or heat guards removed.



Rotating Parts

NEVER operate equipment with covers, or guards removed. Keep

fingers, hands, hair and clothing away from all moving parts to

prevent injury.

Accidental

Starting

ALWAYS place ON/OFF switch to the OFF position, remove key

and/or disconnect the spark plug leads before servicing the

engine, equipment, or supporting components. Ground the lead to

prevent sparks that could ignite a fire.

Lethal Exhaust

Gases

Engine exhaust gases contain poisonous carbon monoxide. This

gas is colorless and odorless, and can cause death if inhaled.

NEVER operate this equipment in a confined area or enclosed

structure that does not provide ample free flow of air.

MQ SP-3035 CONCRETE SAW — OPERATION AND PARTS MANUAL — REV. #3 (09/29/06) — PAGE 9

MQ SP-3035 CONCRETE SAW

HAZARD SYMBOLS

Over Speed

NEVER tamper with factory settings of engine governor or speed

settings. Ensure the proper Speed Kits are installed to safely

support the prescribed RPM settings for diamond blade

operations.

Guards and

Covers in Place

NEVER operate the saw without blade guards and covers in

place. Adhere to safety guidelines ANSI American National

Standards Institute, OSHA, and/or other applicable local

regulations.

Rotating Blade

Rotating Blade can cut, tear, and crush. Keep hands and feet

clear.

Respiratory

Hazard

ALWAYS wear approved respiratory protection.



Sight &

Hearing Hazard

ALWAYS wear approved eye and hearing protection.

Crush Hazard

CRUSH AND PINCH HAZARD Keep hands and feet clear.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MULTIQUIP Gesehen Handbücher

MULTIQUIP

MULTIQUIP FCG1 SERIES Bedienungsanleitung

MULTIQUIP

MULTIQUIP SideWinder HS81A Leitfaden

MULTIQUIP

MULTIQUIP SP118 Bedienungsanleitung

MULTIQUIP

MULTIQUIP SP403030 Bedienungsanleitung

MULTIQUIP

MULTIQUIP SideWinder HS81 Anwendungshandbuch

MULTIQUIP

MULTIQUIP FCG1 SERIES Anwendungshandbuch

MULTIQUIP

MULTIQUIP tp7X Bedienungsanleitung

MULTIQUIP

MULTIQUIP CD6CE13H18 Bedienungsanleitung

MULTIQUIP

MULTIQUIP MP2050E1 Bedienungsanleitung

MULTIQUIP

MULTIQUIP SideWinder HS62A Leitfaden

MULTIQUIP

MULTIQUIP MP2050E1 Bedienungsanleitung

MULTIQUIP

MULTIQUIP StreetPro SP706016 Bedienungsanleitung

MULTIQUIP

MULTIQUIP FCG1-6HA Leitfaden

MULTIQUIP

MULTIQUIP CS706016 Bedienungsanleitung

MULTIQUIP

MULTIQUIP TP24 Leitfaden

MULTIQUIP

MULTIQUIP SP2S20H Bedienungsanleitung

MULTIQUIP

MULTIQUIP MP25E1 Bedienungsanleitung

MULTIQUIP

MULTIQUIP MP1 Series Leitfaden

MULTIQUIP

MULTIQUIP MP1415E Leitfaden

MULTIQUIP

MULTIQUIP FS 1 Bedienungsanleitung

MULTIQUIP

MULTIQUIP Sp-6065 Bedienungsanleitung

MULTIQUIP

MULTIQUIP MP25E1 Bedienungsanleitung

MULTIQUIP

MULTIQUIP MASON PRO MP1 Anwendungshandbuch

MULTIQUIP

MULTIQUIP STREET PRO 2 Leitfaden

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

IMET Spa

IMET Spa BASIC 300 PLUS SHI Bedienungsanleitung

IMET Spa

IMET Spa SIRIO 370 AF-E Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung