MULTIQUIP Whiteman series Bedienungsanleitung

OPERATION MANUAL

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

SERIES

MODEL HTXG6DF

HYDRAULIC RIDE-ON TROWEL

(PSI 2.4L DUAL FUEL)

Gas and Propane Engine

Revision #3 (08/30/19)

PN: 42543

To ﬁnd the latest revision of this publication or

associated parts manual, visit our website at:

www.multiquip.com

PAGE 2 — HTXG6DF RIDE-ON TROWEL• OPERATION MANUAL — REV. #3 (08/30/19)

PROPOSITION 65 WARNING

HTXG6DF RIDE-ON TROWEL • OPERATION MANUAL —REV. #3 (08/30/19) — PAGE 3

Grinding/cutting/drilling of masonry, concrete, metal and

other materials with silica in their composition may give

off dust or mists containing crystalline silica. Silica is a

basic component of sand, quartz, brick clay, granite and

numerous other minerals and rocks. Repeated and/or

substantial inhalation of airborne crystalline silica can

cause serious or fatal respiratory diseases, including

silicosis.Inaddition, California and some other

authorities have listed respirable crystalline silica as a

substance known to cause cancer. When cutting such

materials, always follow the respiratory precautions

mentioned above.

WARNING

Grinding/cutting/drilling of masonry, concrete, metal and

other materials can generate dust, mists and fumes

containing chemicals known to cause serious or fatal

injury or illness, such as respiratory disease, cancer,

birth defects or other reproductive harm. If you are

unfamiliar with the risks associated with the particular

process and/or material being cut or the composition of

the tool being used, review the material safety data

sheet and/or consult your employer, the material

manufacturer/supplier, governmental agencies such as

OSHA and NIOSH and other sources on hazardous

materials. California and some other authorities, for

instance, have published lists of substances known to

cause cancer, reproductive toxicity,or other harmful

effects.

Control dust, mist and fumes at the source where

possible. In this regard use good work practices and

follow the recommendations of the manufacturers or

suppliers, OSHA/NIOSH, and occupational and trade

associations.Water should be used for dust

suppression when wet cutting is feasible. When the

hazards from inhalation of dust, mists and fumes cannot

be eliminated, the operator and any bystanders should

always wear a respirator approved by NIOSH/MSHA for

the materials being used.

WARNING

SILICOSIS WARNING RESPIRATORY HAZARDS

SILICOSIS/RESPIRATORY WARNINGS

PAGE 4 — HTXG6DF RIDE-ON TROWEL• OPERATION MANUAL — REV. #3 (08/30/19)

TABLE OF CONTENTS

HTXG6DF Ride-On Trowel

Proposition 65 Warning ........................................... 2

Silicosis/Respiratory Warnings ................................ 3

Table Of Contents.................................................... 4

Training Checklist .................................................... 6

Daily Pre-Operation Checklist ................................. 7

Safety Information ............................................. 8–15

Lifting And Transporting................................... 16–19

Dimensions............................................................ 20

Speciﬁcations ........................................................ 21

Noise And Vibration............................................... 22

General Information............................................... 23

Components .................................................... 24–26

Basic Engine.......................................................... 27

Inspection ........................................................ 28–30

Setup/Operation .................................................... 31

Operation......................................................... 32–39

Maintenance.................................................... 40–75

Troubleshooting ............................................... 76–78

NOTICE

Speciﬁcations are subject to change without notice.

HTXG6DF RIDE-ON TROWEL • OPERATION MANUAL —REV. #3 (08/30/19) — PAGE 5

NOTES

PAGE 6 — HTXG6DF RIDE-ON TROWEL• OPERATION MANUAL — REV. #3 (08/30/19)

TRAINING CHECKLIST

Training Checklist

No. Description OK? Date

1Read operation manual

completely

Machine layout, location of

components, checking of engine

and hydraulic oil levels

3 Fuel system, refueling procedure

4 Operation of spray and lights

5Operation of controls (machine

not running)

6Safety controls, safety stop switch

operation

7 Emergency stop procedures

8 Startup of machine

9 Maintaining a hover

10 Maneuvering

11 Pitching

12 Matching blade pitch.

Smart Pitch™

13 Concrete ﬁnishing techniques

14 Shutdown of machine

15 Lifting of machine (lift loops)

HTXG6DF RIDE-ON TROWEL • OPERATION MANUAL —REV. #3 (08/30/19) — PAGE 7

DAILY PRE-OPERATION CHECKLIST

Daily Pre-Operation Checklist      

1 Engine oil level

2 Hydraulic oil level

3 Radiator coolant level

4 Condition of blades

5 Blade pitch operation

6 Safety stop switch operation

7 Steering control operation

PAGE 8 — HTXG6DF RIDE-ON TROWEL• OPERATION MANUAL — REV. #3 (08/30/19)

SAFETY INFORMATION

Do not operate or service the equipment before reading

the entire manual. Safety precautions should be followed

at all times when operating this equipment.

Failure to read and understand the safety

messages and operating instructions could

result in injury to yourself and others.

SAFETY MESSAGES

The four safety messages shown below will inform you

about potential hazards that could injure you or others.The

safety messages speciﬁcally address the level of exposure

to the operator and are preceded by one of four words:

DANGER, WARNING, CAUTION

or NOTICE.

SAFETY SYMBOLS

DANGER

Indicates a hazardous situation which, if not avoided,

WILL result in DEATH or SERIOUS INJURY.

WARNING

Indicates a hazardous situation which, if not avoided,

COULD result in DEATH or SERIOUS INJURY.

CAUTION

Indicates a hazardous situation which, if not avoided,

COULD result in MINOR or MODERATE INJURY.

NOTICE

Addresses practices not related to personal injury.

Potential hazards associated with the operation of this

equipment will be referenced with hazard symbols which

may appear throughout this manual in conjunction with

safety messages.

Lethal exhaust gas hazards

Explosive fuel hazards

Burn hazards

Rotating parts hazards

Symbol Safety Hazard

Pressurized fluid hazards

Hydraulic fluid hazards

HTXG6DF RIDE-ON TROWEL • OPERATION MANUAL —REV. #3 (08/30/19) — PAGE 9

SAFETY INFORMATION

DECALS

Decals associated with the operation of this equipment

are deﬁned below.

To avoid injury you must read and understand

operator’s manual before using this machine.

WARNING

Read Manual

DECAL

Lift Point

Attach lifting strap to this point.

NOTICE

Wear appropriate clothing before operating trowel.

NOTICE

WARNING

DEFINITION

P/N 36099

DANGER

Guard Hazard

operate equipment with guards

removed. Serious bodily injury could result.

DO NOT

operate equipment with guards

removed. Keep hands and fingers clear of gears.

Serious bodily injury could result.

DO NOT

Keep hands and fingers clear from engine

fan blades. Moving parts can cut.

remove guards.DO NOT

DANGER

Rotating Blade Hazard

Keep persons clear from a lifted trowel.

DO NOT stand below the trowel.

DO NOT lift trowel with pans attached.

DANGER

Lifting/Crush Hazard

Fuel Type

The engine used in this equipment requires

unleaded gasoline.

NOTICE

DO NOT light matches around or near this

equipment. This equipment contains highly

flammable fuel. If ignited, could start a

causing equipment damage and severe

bodily harm even death!

fire

DANGER

Fire Hazard

Entanglement/Crush Hazard.

Protective Clothing

DECAL DEFINITION

P/N 23803-XXX

XXX

Noise Level

NOTICE

Indicates value of sound pressure of

equipment. Measured at operator’s seat.

Hot steam or coolant may escape when

radiator cap is removed, causing severe

burns. Allow radiator to cool before

removing cap.

DANGER

Explosion Hazard

DO NOT smoke around or near this

equipment. This equipment contains highly

flammable fuel. If ignited, could start a fire

causing equipment damage and severe

bodily harm — even death!

DANGER

Fire Hazard

DO NOT smoke around or near this

equipment. This equipment contains highly

flammable fuel. If ignited, could start an

explosion causing equipment damage

and severe bodily harm — even death!

DANGER

Fire Explosion Hazard

DANGER

Inhalation Hazard

DO NOT use this equipment in an

enclosed area. The engine used with

this equipment emits harmful levels of

carbon monoxide which can cause

severe bodily harm — even death!

This machine to be operated by qualified

personnel only. Ask for training as needed.

WARNING

Ask for Help/Training

PAGE 10 — HTXG6DF RIDE-ON TROWEL• OPERATION MANUAL — REV. #3 (08/30/19)

SAFETY INFORMATION

GENERAL SAFETY

CAUTION



NEVER operate this equipment without proper protective

clothing, shatterproof glasses, respiratory protection,

hearing protection, steel-toed boots and other protective

devices required by the job or city and state regulations.



Avoid wearing jewelry or loose ﬁtting clothes that may

snag on the controls or moving parts as this can cause

serious injury.



NEVER operate this equipment when not

feeling well due to fatigue, illness or when

under medication.



NEVER operate this equipment under the

inﬂuence of drugs or alcohol.

P/N ?????

Cold weather starting below 40°F (4°C).

Run engine 3–5 minutes while moving

steering controls before depressing

blade control pedal.

WARNING

Cold Weather Conditions

When drive bypass switch is activated,

equipment working lights will flash indicating

that blades may be turned without an

operator in the seat. USE EXTREME

CAUTION in this drive mode!

WARNING

Drive Bypass Switch

DECAL DEFINITION

Trowel rotor speeds are factory set.

Tampering with settings can lead to

damage and void machine warranty.

WARNING

Hydraulic Pump

ALWAYS clear the work area of any debris, tools, etc.

that would constitute a hazard while the equipment is

in operation.



No one other than the operator is to be in the working

area when the equipment is in operation.

DO NOT

use the equipment for any purpose other than

its intended purposes or applications.

NOTICE



This equipment should only be operated by trained and

qualiﬁed personnel 18 years of age and older.



Whenever necessary, replace nameplate, operation and

safety decals when they become difﬁcult read.



Manufacturer does not assume responsibility for any

accident due to equipment modiﬁcations. Unauthorized

equipment modiﬁcation will void all warranties.

NEVER

use accessories or attachments that are not

recommended by Multiquip for this equipment. Damage

to the equipment and/or injury to user may result.

ALWAYS know the location of the nearest

ﬁre extinguisher.

ALWAYS know the location of the nearest

ﬁrst aid kit.

ALWAYS know the location of the nearest phone or

keep

a phone on the job site.

Also, know the phone numbers

of the nearest ambulance, doctor and

ﬁre department.

This information will be invaluable in the case of an

emergency.

Andere Handbücher für Whiteman series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MULTIQUIP Kelle Handbücher

MULTIQUIP

MULTIQUIP JH55C Leitfaden

MULTIQUIP

MULTIQUIP Whiteman JTN Leitfaden

MULTIQUIP

MULTIQUIP B Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP BS90C Leitfaden

MULTIQUIP

MULTIQUIP BS46H90 Leitfaden

MULTIQUIP

MULTIQUIP Whiteman series Bedienungsanleitung

MULTIQUIP

MULTIQUIP WHITEMAN INSTACLUTCH J Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP CA4HM Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman series Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman CA5BC Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman series Bedienungsanleitung

MULTIQUIP

MULTIQUIP Mikasa Series Leitfaden

MULTIQUIP

MULTIQUIP Whiteman J36H55 Leitfaden

MULTIQUIP

MULTIQUIP Whiteman STXD6i Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman Series Handbuch

MULTIQUIP

MULTIQUIP hhn34tvdtcsl5 Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman J36H55 Bedienungsanleitung

MULTIQUIP

MULTIQUIP J-SERIES Leitfaden

MULTIQUIP

MULTIQUIP HHN-31V Leitfaden

MULTIQUIP

MULTIQUIP js36h55 Leitfaden

MULTIQUIP

MULTIQUIP Whiteman series Bedienungsanleitung

MULTIQUIP

MULTIQUIP HPHA36C5H Leitfaden

MULTIQUIP

MULTIQUIP WHITEMAN HHXD5 Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman LD6SL Bedienungsanleitung

Beliebte Kelle Handbücher anderer Marken

allen

allen HP105 Anwendungshandbuch

Bartell

Bartell BM90 Bedienungsanleitung

Stone

Stone CF24E Bedienungsanleitung

allen

allen HDX750 Anwendungshandbuch

Norton

Norton MTA 36 Leitfaden

MBW

MBW F24 Bedienungsanleitung

MBW

MBW MK8-75 Bedienungsanleitung

Wacker Neuson

Wacker Neuson CT 36-400E Bedienungsanleitung

Atlas Copco

Atlas Copco BG 240 E Wartungs- und Serviceanleitung

MQ Multiquip

MQ Multiquip JS36/30H55DE Series Leitfaden

swepac

swepac TR 600P Bedienungsanleitung

allen

allen PRO436DF Leitfaden

Wacker Neuson

Wacker Neuson CT 36 Bedienungsanleitung

Marshalltown

Marshalltown Speed Striker STRIKE45-L Bedienungsanleitung

Wacker Neuson

Wacker Neuson CRT 48-31V Bedienungsanleitung

Northern Industrial

Northern Industrial tmt-36 Bedienerhandbuch

BOMAX

BOMAX BM-836H Bedienungsanleitung

ENAR

ENAR TIFON 908 Bedienungsanleitung