MULTIQUIP Whiteman series Bedienungsanleitung

OPERATION MANUAL

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

To ﬁnd the latest revision of this

publication, visit our website at:

www.multiquip.com

MODEL J3036H55

CONVERTIBLE EDGING

WALK-BEHIND TROWEL

(HONDA GX160 GASOLINE ENGINE)

Revision #0 (06/27/18)

PN: 13412

SERIES

PAGE 2 — J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18)

Engine exhaust and some of

its constituents, and some dust created

of California to cause cancer, birth

defects and other reproductive harm.

by power sanding, sawing, grinding,

drillingandotherconstructionactivities

contains chemicals known to the State

Some examples of these chemicals are:

Leadfromlead-basedpaints.

Crystallinesilicafrombricks.

Cementandothermasonryproducts.

Arsenicandchromiumfromchemically

treatedlumber.

Di-lsononyl Phthalate(DINP)

Your risk from these exposures varies,

dependingonhowoftenyoudothistype

of work. To reduce your exposure to

these chemicals: ALWAYS work in a

well ventilated area, and work with

approved safety equipment, such as

dust masks that are specially designed

to filter out microscopic particles.

PROPOSITION 65 WARNING

J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18) — PAGE 3

Grinding/cutting/drilling of masonry, concrete, metal and

other materials with silica in their composition may give

off dust or mists containing crystalline silica. Silica is a

basic component of sand, quartz, brick clay, granite and

numerous other minerals and rocks. Repeated and/or

substantial inhalation of airborne crystalline silica can

cause serious or fatal respiratory diseases, including

silicosis.Inaddition, California and some other

authorities have listed respirable crystalline silica as a

substance known to cause cancer. When cutting such

materials, always follow the respiratory precautions

mentioned above.

WARNING

Grinding/cutting/drilling of masonry, concrete, metal and

other materials can generate dust, mists and fumes

containing chemicals known to cause serious or fatal

injury or illness, such as respiratory disease, cancer,

birth defects or other reproductive harm. If you are

unfamiliar with the risks associated with the particular

process and/or material being cut or the composition of

the tool being used, review the material safety data

sheet and/or consult your employer, the material

manufacturer/supplier, governmental agencies such as

OSHA and NIOSH and other sources on hazardous

materials. California and some other authorities, for

instance, have published lists of substances known to

cause cancer, reproductive toxicity,or other harmful

effects.

Control dust, mist and fumes at the source where

possible. In this regard use good work practices and

follow the recommendations of the manufacturers or

suppliers, OSHA/NIOSH, and occupational and trade

associations.Water should be used for dust

suppression when wet cutting is feasible. When the

hazards from inhalation of dust, mists and fumes cannot

be eliminated, the operator and any bystanders should

always wear a respirator approved by NIOSH/MSHA for

the materials being used.

WARNING

SILICOSIS WARNING RESPIRATORY HAZARDS

SILICOSIS/RESPIRATORY WARNINGS

PAGE 4 — J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18)

TABLE OF CONTENTS

J3036H55

Convertible Edging

Walk-Behind Trowel

Proposition 65 Warning ........................................... 2

Silicosis/Respiratory Warnings ................................ 3

Table Of Contents.................................................... 4

Training Checklist .................................................... 5

Daily Pre-Operation Checklist ................................. 6

Safety Information ............................................. 7–12

Lifting And Transporting......................................... 13

Speciﬁcations ........................................................ 14

Dimensions............................................................ 15

General Information............................................... 16

Components (Trowel) ...................................... 18–19

Components (Engine)............................................ 20

Setup ............................................................... 21–29

Inspection ........................................................ 30–31

Operation......................................................... 32–36

Options ............................................................ 37–38

Maintenance.................................................... 39–47

Troubleshooting (Engine)................................. 48–49

Troubleshooting (Trowel).................................. 50–51

Wiring Diagram...................................................... 52

NOTICE

Equipment speciﬁcations and features are subject to

change without notice.

J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18) — PAGE 5

TRAINING CHECKLIST

Training Checklist

No. Description OK? Date

1Read operation manual

completely.

Machine layout, location of

components, checking of engine

oil level.

3 Fuel system, refueling procedure.

4Operation of controls (machine

not running).

5Safety controls, safety stop switch

operation.

6 Emergency stop procedures.

7 Startup of machine, engine choke.

8 Maintaining a hover.

9 Maneuvering.

10 Pitching.

11 Concrete ﬁnishing techniques.

12 Shutdown of machine.

13 Lifting of machine (lifting bail).

14 Machine transport and storage.

PAGE 6 — J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18)

DAILY PRE-OPERATION CHECKLIST

Daily Pre-Operation Checklist      

1 Engine oil level

2 Gearbox oil level

3 Condition of blades

4 Blade pitch operation

5 Safety stop switch operation

J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18) — PAGE 7

SAFETY INFORMATION

DO NOT operate or service the equipment before reading

the entire manual. Safety precautions should be followed

at all times when operating this equipment.

Failure to read and understand the safety

messages and operating instructions could

result in injury to yourself and others.

SAFETY MESSAGES

The four safety messages shown below will inform you

about potential hazards that could injure you or others.The

safety messages speciﬁcally address the level of exposure

to the operator and are preceded by one of four words:

DANGER, WARNING, CAUTION

or NOTICE.

SAFETY SYMBOLS

DANGER

Indicates a hazardous situation which, if not avoided,

WILL result in DEATH or SERIOUS INJURY.

WARNING

Indicates a hazardous situation which, if not avoided,

COULD result in DEATH or SERIOUS INJURY.

CAUTION

Indicates a hazardous situation which, if not avoided,

COULD result in MINOR or MODERATE INJURY.

NOTICE

Addresses practices not related to personal injury.

Potential hazards associated with the operation of this

equipment will be referenced with hazard symbols

which

may appear throughout this manual in conjunction with

safety messages.

Lethal exhaust gas hazards

Explosive fuel hazards

Burn hazards

Rotating parts hazards

Symbol Safety Hazard

Pressurized fluid hazards

PAGE 8 — J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18)

SAFETY INFORMATION

SAFETY DECALS

Safety decals associated with the operation of this

equipment are deﬁned below:

DANGER

Belt Guard Hazard

DO NOT remove belt guards.

Keep hands and fingers clear from engine belts.

Moving parts can crush.

DANGER

Training

This machine to be operated by qualified

personnel only. Ask for training as needed.

DANGER

Inhalation Hazard

DO NOT use this equipment in an enclosed area.

The engine used with this equipment emits

harmful levels of carbon monoxide which can

cause severe bodily harm — even death!

DANGER

Rotating Blade Hazard

Keep hands, fingers, and feet clear of engine

fan blades and guard rings. Moving parts can cut.

DO NOT remove guards.

Stop engine before servicing.

P/N 23700

WARNING

Lifting/Crush Hazard

NEVER allow any person to stand

underneath the trowel while lifting.

DO NOT lift trowel with pans attached.

ALWAYS make sure handle is securely attached.

P/N 36099

NOTICE

Read Manual

To avoid injury, you must read and understand

the operator’s manual before using this machine.

NOTICE

Protective Clothing

ALWAYS wear appropriate clothing

when operating the trowel.

NOISE LEVEL

Indicates value of the sound power of the

equipment measured at operator’s seat.

GENERAL SAFETY

CAUTION

NEVER

operate this equipment without proper protective

clothing, shatterproof glasses, respiratory protection,

hearing protection, steel-toed boots and other protective

devices required by the job or city and state regulations.



Avoid wearing jewelry or loose ﬁtting clothes that may

snag on the controls or moving parts as this can cause

serious injury.

NEVER operate this equipment when not

feeling well due to fatigue, illness, or when

on medication.

NEVER operate this equipment under the

inﬂuence of drugs or alcohol.

ALWAYS

clear the work area of any debris, tools, etc.

that would constitute a hazard while the equipment is

in operation.



No one other than the operator is to be in the working

area when the equipment is in operation.

DO NOT

use the equipment for any purpose other than

its intended purposes or applications.

J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18) — PAGE 9

SAFETY INFORMATION

NOTICE



This equipment should only be operated by trained and

qualiﬁed personnel 18 years of age and older.



Whenever necessary, replace nameplate, operation and

safety decals when they become difﬁcult read.



Manufacturer does not assume responsibility for any

accident due to equipment modiﬁcations. Unauthorized

equipment modiﬁcation will void all warranties.



NEVER use accessories or attachments that are not

recommended by Multiquip for this equipment. Damage

to the equipment and/or injury to the user may result.



ALWAYS know the location of the nearest

ﬁre extinguisher.



ALWAYS know the location of the nearest

ﬁrst aid kit.



ALWAYS know the location of the nearest phone or keep

a phone on the job site. Also, know the phone numbers

of the nearest ambulance, doctor and ﬁre department.

This information will be invaluable in the case of an

emergency.

TROWEL SAFETY

DANGER



Engine fuel exhaust gases contain poisonous carbon

monoxide. This gas is colorless and odorless, and can

cause death if inhaled.



The engine of this equipment requires an adequate free

ﬂow of cooling air. NEVER

operate this equipment in any

enclosed or narrow area

where the free ﬂow of air is

restricted. If the air ﬂow is

restricted it will cause injury

to people and property and

serious damage to the

equipment or engine.

NEVER operate the equipment in an

explosive atmosphere or near combustible

materials. An explosion or ﬁre could result

causing severe bodily harm or even death.

WARNING

ALWAYS keep clear of rotating or moving

parts while operating the trowel.

DO NOT start or operate the trowel if the

drive train will not disengage. Centrifugal

force between the trowel and surface when starting can

cause uncontrolled handle movement that can cause

serious injury. The handle must not move while pulling

the engine recoil starter.

NEVER disconnect any

emergency or safety devices.

These devices are intended for operator safety.

Disconnection of these devices can cause

severe injury,

bodily harm or even death

. Disconnection of any of

these devices will void all warranties.

DANGEROUS

GAS FUMES

PAGE 10 — J3036H55 WALK-BEHIND TROWEL • OPERATION MANUAL — REV. #0 (06/27/18)

SAFETY INFORMATION

CAUTION



NEVER stand on the trowel during operation.



NEVER lubricate components or attempt service on a

running machine.



NEVER place your feet or hands inside the guard rings

while starting or operating this equipment.



ALWAYS keep the work area clear around the trowel.Make

sure it is free of debris and objects.

NOTICE



ALWAYS keep the machine in proper running condition.



Fix damage to the machine and replace any broken

parts immediately.



ALWAYS store equipment properly when it is not being

used. Equipment should be stored in a clean, dry location

out of the reach of children and unauthorized personnel.



A safety manual for operating and maintenance

personnel of concrete power trowels produced by the

Association of Equipment Manufacturers (AEM) can be

obtained for a fee by ordering through their website at

www.aem.org.

Order Form PT-160

ENGINE SAFETY

WARNING

DO NOT

place hands or fingers inside the engine

compartment while the engine is running.

NEVER

operate the engine with heat shields or

guards removed.

Keep ﬁngers, hands, hair and clothing away

from all moving parts to prevent injury.

DO NOT remove the engine oil drain plug

while the engine is hot. Allow the oil to cool before

performing maintenance. This will prevent scalding

of personnel.

CAUTION

NEVER touch the hot exhaust manifold,

mufﬂer, or cylinder. Allow these parts to cool

before servicing the equipment.

NOTICE

NEVER

run the engine without an air ﬁlter or with a dirty

air ﬁlter. Severe engine damage may occur. Service the

air ﬁlter frequently to prevent engine malfunction.

NEVER tamper with the factory settings

of the engine or engine governor. Damage

to the engine or equipment can result

if operating in speed ranges above the

maximum allowable.

Andere Handbücher für Whiteman series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MULTIQUIP Kelle Handbücher

MULTIQUIP

MULTIQUIP Whiteman series Bedienungsanleitung

MULTIQUIP

MULTIQUIP JTNSW20HTCSL Bedienungsanleitung

MULTIQUIP

MULTIQUIP hhn34tvdtcsl4 Bedienungsanleitung

MULTIQUIP

MULTIQUIP BS90C Leitfaden

MULTIQUIP

MULTIQUIP Whiteman series Bedienungsanleitung

MULTIQUIP

MULTIQUIP WHITEMAN INSTACLUTCH J Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP Whiteman Series Handbuch

MULTIQUIP

MULTIQUIP J-36 Leitfaden

MULTIQUIP

MULTIQUIP J-SERIES Leitfaden

MULTIQUIP

MULTIQUIP J36E2 Bedienungsanleitung

MULTIQUIP

MULTIQUIP WHITEMAN CA5BM Bedienungsanleitung

MULTIQUIP

MULTIQUIP PRO46 Leitfaden

MULTIQUIP

MULTIQUIP Whiteman JWN Series Leitfaden

MULTIQUIP

MULTIQUIP BH11C Betriebsanleitung

MULTIQUIP

MULTIQUIP Whiteman JTN Leitfaden

MULTIQUIP

MULTIQUIP Whiteman HTN-28K-TCSL Bedienungsanleitung

MULTIQUIP

MULTIQUIP HHX Bedienungsanleitung

MULTIQUIP

MULTIQUIP WHITEMAN HHXD5 Bedienungsanleitung

MULTIQUIP

MULTIQUIP CA4HM Bedienungsanleitung

MULTIQUIP

MULTIQUIP WHITEMAN EPOXY/M Series Leitfaden

MULTIQUIP

MULTIQUIP Mikasa Series Leitfaden

MULTIQUIP

MULTIQUIP Whiteman Series Leitfaden

MULTIQUIP

MULTIQUIP Whiteman series Bedienungsanleitung

MULTIQUIP

MULTIQUIP BH11C Betriebsanleitung

Beliebte Kelle Handbücher anderer Marken

allen

allen HP105 Anwendungshandbuch

Bartell

Bartell BM90 Bedienungsanleitung

Stone

Stone CF24E Bedienungsanleitung

allen

allen HDX750 Anwendungshandbuch

Norton

Norton MTA 36 Leitfaden

MBW

MBW F24 Bedienungsanleitung

MBW

MBW MK8-75 Bedienungsanleitung

Wacker Neuson

Wacker Neuson CT 36-400E Bedienungsanleitung

Atlas Copco

Atlas Copco BG 240 E Wartungs- und Serviceanleitung

MQ Multiquip

MQ Multiquip JS36/30H55DE Series Leitfaden

swepac

swepac TR 600P Bedienungsanleitung

allen

allen PRO436DF Leitfaden

Wacker Neuson

Wacker Neuson CT 36 Bedienungsanleitung

Marshalltown

Marshalltown Speed Striker STRIKE45-L Bedienungsanleitung

Wacker Neuson

Wacker Neuson CRT 48-31V Bedienungsanleitung

Northern Industrial

Northern Industrial tmt-36 Bedienerhandbuch

BOMAX

BOMAX BM-836H Bedienungsanleitung

ENAR

ENAR TIFON 908 Bedienungsanleitung