MULTIQUIP Mikasa Series Bedienungsanleitung

OPERATION MANUAL

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

SERIES

MODEL MTe55

RAMMER

(HONDA GXE2.0S 2.4 HP ELECTRIC MOTOR)

Revision #1 (12/15/22)

To ﬁnd the latest revision of this publication or

associated parts manual, visit our website at:

www.discount-equipment.com

Discount-Equipment.com

We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman,

Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power

Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull,

Skytrak, Tsurumi, Husquvarna Target, Stow, Wacker, Sakai, Mi-T-M, Sullair, Basic, Dynapac,

MBW, Weber, Bartell, Bennar Newman, Haulotte, Ditch Runner, Menegotti, Morrison, Contec,

Buddy, Crown, Edco, Wyco, Bomag, Laymor, EZ Trench, Bil-Jax, F.S. Curtis, Gehl Pavers, Heli,

Honda, ICS/PowerGrit, IHI, Partner, Imer, Clipper, MMD, Koshin, Rice, CH&E, General Equip-

ment ,Amida, Coleman, NAC, Gradall, Square Shooter, Kent, Stanley, Tamco, Toku, Hatz,

Kohler, Robin, Wisconsin, Northrock, Oztec, Toker TK, Rol-Air, APT, Wylie, Ingersoll Rand /

Doosan, Innovatech, Con X, Ammann, Mecalac, Makinex, Smith Surface Prep,Small Line,

Wanco, Yanmar

Discount-Equipment.com is your online resource for

commercial and industrial quality parts and equipment sales.

561-964-4949

visit us on line @ www.discount-equipment.com

TO PURCHASE THIS PRODUCT PLEASE CONTACT US

Select an option below to find your Equipment

Equipment Financing and

Extended Warranties Available

Discount-Equipment.com

PAGE 2 — MTe55 RAMMER • OPERATION MANUAL — REV. #1 (12/15/22)

PROPOSITION 65 WARNING

Discount-Equipment.com

PAGE 4 — MTe55 RAMMER • OPERATION MANUAL — REV. #1 (12/15/22)

TABLE OF CONTENTS

MTe55 Rammer

Proposition 65 Warning ........................................... 2

Safety Information ................................................ 5-7

Speciﬁcations ....................................................... 8-9

Noise And Vibration Emissions................................ 9

Dimensions............................................................ 10

General Information............................................... 11

Components ..................................................... 12-13

Transporting And Lifting......................................... 14

Inspection ......................................................... 15-16

Operation.......................................................... 17-18

Maintenance.......................................................... 19

Troubleshooting ..................................................... 20

NOTICE

Speciﬁcations and part numbers are subject to change

without notice.

Discount-Equipment.com

MTe55 RAMMER • OPERATION MANUAL — REV. #1 (12/15/22) — PAGE 5

SAFETY INFORMATION

Do not operate or service the equipment before reading

the entire manual. Safety precautions should be followed

at all times when operating this equipment.

Failure to read and understand the safety

messages and operating instructions could

result in injury to yourself and others.

SAFETY MESSAGES

The four safety messages shown below will inform you

about potential hazards that could injure you or others.The

safety messages speciﬁcally address the level of exposure

to the operator and are preceded by one of four words:

DANGER, WARNING, CAUTION

or NOTICE.

SAFETY SYMBOLS

DANGER

Indicates a hazardous situation which, if not avoided,

WILL result in DEATH or SERIOUS INJURY.

WARNING

Indicates a hazardous situation which, if not avoided,

COULD result in DEATH or SERIOUS INJURY.

CAUTION

Indicates a hazardous situation which, if not avoided,

COULD result in MINOR or MODERATE INJURY.

NOTICE

Addresses practices not related to personal injury.

Potential hazards associated with the operation of this

equipment will be referenced with hazard symbols which

may appear throughout this manual in conjunction with

safety messages.

Discount-Equipment.com

PAGE 6 — MTe55 RAMMER • OPERATION MANUAL — REV. #1 (12/15/22)

SAFETY INFORMATION

GENERAL SAFETY

CAUTION



NEVER operate this equipment without proper protective

clothing, shatterproof glasses, respiratory protection,

hearing protection, steel-toed boots and other protective

devices required by the job or city and state regulations.



NEVER operate this equipment when not

feeling well due to fatigue, illness or when

under medication.



NEVER operate this equipment under the inﬂuence of

drugs or alcohol.



ALWAYS check the equipment for loosened threads or

bolts before starting.



DO NOT use the equipment for any purpose other than

its intended purposes or applications.

NOTICE



This equipment should only be operated by trained and

qualiﬁed personnel 18 years of age and older.



Whenever necessary, replace nameplate, operation and

safety decals when they become difﬁcult read.



Manufacturer does not assume responsibility for any

accident due to equipment modiﬁcations. Unauthorized

equipment modiﬁcation will void all warranties.



NEVER use accessories or attachments that are not

recommended by Multiquip for this equipment. Damage

to the equipment and/or injury to user may result.



ALWAYS know the location of the nearest

ﬁre extinguisher.



ALWAYS know the location of the nearest

ﬁrst aid kit.

ALWAYS know the location of the nearest phone or keep a

phone on the job site.

Also, know the phone numbers of

the nearest ambulance, doctor and ﬁre department.

This

information will be invaluable in the case of an emergency.

RAMMER SAFETY

DANGER

NEVER operate the equipment in an explosive

atmosphere or near combustible materials. An

explosion or ﬁre could result causing severe

bodily harm or even death.

WARNING

NEVER disconnect any

emergency or safety devices.

These devices are intended for operator safety.

Disconnection of these devices can cause severe injury,

bodily harm or even death. Disconnection of any of these

devices will void all warranties.

DO NOT

use this machine on ground that is harder than

the machine can handle, or for driving pilings or tamping

rock beds. Furthermore, use of the machine on sloping

ground, such as the side of an embankment, may make

the machine unstable and can cause an accident. It can

also result in premature machine wear due to uneven

loads on the machine.

Use the machine with conﬁdence for tamping earth and

sand, soil, gravel, and asphalt. DO NOT

use the machine

for other types of jobs.

CAUTION

NEVER

lubricate components or attempt service on a

running machine.

NOTICE

ALWAYS keep the machine in proper running condition.



Fix damage to machine and replace any broken parts

immediately.

ALWAYS

store equipment properly when it is not being

used. Equipment should be stored in a clean, dry location

out of the reach of children and unauthorized personnel.

Discount-Equipment.com

MTe55 RAMMER • OPERATION MANUAL — REV. #1 (12/15/22) — PAGE 7

SAFETY INFORMATION

BATTERY SAFETY

CAUTION



Remove or attach battery in a clear and ﬂat location

without any combustible materials nearby.



After attaching the battery, make sure that the battery

hook and fastener are securely attached.

DC POWER UNIT

CAUTION



DO NOT touch the DC power unit during work or soon

after work, because it is very hot.

TRANSPORTING SAFETY

CAUTION



NEVER allow any person or animal to stand underneath

the equipment while lifting.

NOTICE



Before lifting, make sure that the equipment parts (hook

and vibration insulator) are not damaged and screws are

not loose or missing.



Always make sure crane or lifting device has been

properly secured to the lifting bail (hook) of the

equipment.



ALWAYS shutdown engine before transporting.



NEVER lift the equipment while the DC power is on.



Remove the battery pack before transporting or storing

the machine.



Use adequate lifting cable (wire or rope) of sufﬁcient

strength.



Use one point suspension hook and lift straight upwards.



DO NOT lift machine to unnecessary heights.



ALWAYS tie down equipment during transport by

securing the equipment with rope.



Never allow any person or animal to stand underneath the

equipment while lifting.

ENVIRONMENTAL SAFETY

NOTICE

Dispose of hazardous waste properly.

Examples of potentially hazardous waste

are used motor oil, fuel and fuel ﬁlters.

DO NOT

use food or plastic containers to dispose of

hazardous waste.

DO NOT

pour waste, oil or fuel directly onto the ground,

down a drain or into any water source.

Discount-Equipment.com

PAGE 8 — MTe55 RAMMER • OPERATION MANUAL — REV. #1 (12/15/22)

SPECIFICATIONS

Table 1. Rammer Speciﬁcations

Overall Height 40.9 in. (1040 mm)

Overall Width 13.8 in. (350 mm)

Over Length 28.2 in. (715 mm)

Plate Size (W x L) 10.4 x 13.4 in. (265 x 340 mm)

Lubrication Oil AP Service Category SE or higher SAE10W-30

Lubrication Oil Capacity 0.62 qt. (0.66 liter)

No. of Impacts Per Minute:

Rated speed (3,600 rpm)

Medium speed (3,600 rpm)

Low speed (3,600 rpm)

689 BPM (11.5 Hz)

632 BPM (10.5 Hz)

574 BPM (9.6 Hz)

Impact Force 1984-2425 lbf (8.8-10.8 kN)

Shoe Jump Height 1.18-2.76 in (30-70 mm)

Operating Weight 165 lbs. (75 kg)

Table 2. DC Power Unit Speciﬁcations

Model Honda GXE2.OS

Type Three-phase brushless DC motor

Weight (without battery)

Controller

Motor

15.7 lbs. (7.1 kg)

19.2 lbs. (8.7 kg)

Cooling System Forced Air

Maximum Output 2.4 HP (1.8 KW) @ 3600 R.P.M.

Voltage 72 V

Table 3. Battery Speciﬁcations

Model Honda DP72104Z

Type Rechargeable Lithium Ion Battery

Dimensions (L x Wx H 9.2 x 10.6 x 5.9 in (233 x 268 x 150 mm)

Weight 14.1 lbs. (6.4 kg)

Voltage 72 V

Charging Temperature Range 41 - 86 °F (5 - 30 °C)

Operating Temperature Range 41 - 104 °F (5 - 40 °C)

Storage Temperature Range 23 - 86 °F (-5 - 30 °C)

Discount-Equipment.com

MTe55 RAMMER • OPERATION MANUAL — REV. #1 (12/15/22) — PAGE 9

SPECIFICATIONS/NOISE AND VIBRATION EMISSIONS

NOTES:

1. Products are tested for sound pressure level in accordance with European Directives 2000/14/EC and 2005/88/EC, relating to Noise Emission

in the Environment by equipment for use outdoors.

2. Products are tested for hand/arm vibration (HAV) level in accordance with European Directives 2002/44/EC and EN500-4 and ISO 5349-1:2001,

ISO 5349-2:2001.

Table 4. Battery Charger Speciﬁcations

Model Honda CV7285Z

Dimensions (L x Wx H) 10.5 x 13.9 x 9.7 in (266 x 352 x 247 mm)

Weight 24.2 lbs. (11 kg)

Cable Length 78.7 in (2000 mm)

Input Voltage 100-240 VAC

Input Frequency 50/60 Hz

Output Voltage 82.8 VDC

Charging Temperature Range 41 - 86 °F (5 - 30 °C)

Charging Time: 80%

100%

1 hour

1.5 hours

Table 5. Noise and Vibration Emissions

Measured Sound Power Level in dB(A) 97

Guaranteed Sound Power Level in dB(A) 100

Guaranteed Sound Pressure Level at Operator Station in dB(A) 84

Hand-Arm Vibration in m/s23.6

Discount-Equipment.com

PAGE 10 — MTe55 RAMMER • OPERATION MANUAL — REV. #1 (12/15/22)

DIMENSIONS

E D

Table 6. Dimensions

Reference Measurement

A 13.78 in (350 mm)

B 28.15 in (715 mm)

C 40.94 in (1040 mm)

D 13.39 in. (340 mm)

E 10.43 in. (265 mm)

Discount-Equipment.com

Andere Handbücher für Mikasa Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MULTIQUIP Vibrationsstampfer und -verdichter Handbücher

MULTIQUIP

MULTIQUIP Mikasa Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP MTX60HD Leitfaden

MULTIQUIP

MULTIQUIP Mikasa Series Leitfaden

MULTIQUIP

MULTIQUIP Mikasa Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP MTR40F Leitfaden

MULTIQUIP

MULTIQUIP Mikasa Series Leitfaden

MULTIQUIP

MULTIQUIP Mikasa Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP Mikasa Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP Mikasa Series Leitfaden

MULTIQUIP

MULTIQUIP Mikasa Series Leitfaden

MULTIQUIP

MULTIQUIP Mikasa MTX70HDR Leitfaden

MULTIQUIP

MULTIQUIP MTX70HD Leitfaden

MULTIQUIP

MULTIQUIP Mikasa Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP Mikasa Series Leitfaden

MULTIQUIP

MULTIQUIP Mikasa Series Leitfaden

MULTIQUIP

MULTIQUIP MT-65HA Anleitung zur Verwendung

MULTIQUIP

MULTIQUIP Mikasa MT-85H Bedienungsanleitung

MULTIQUIP

MULTIQUIP Mikasa Series Leitfaden

MULTIQUIP

MULTIQUIP Mikasa Series Leitfaden

MULTIQUIP

MULTIQUIP Mikasa Series Bedienungsanleitung

MULTIQUIP

MULTIQUIP Mikasa MT-75H Leitfaden

MULTIQUIP

MULTIQUIP Mikasa MTX-90 Leitfaden

Beliebte Vibrationsstampfer und -verdichter Handbücher anderer Marken

Fayat

Fayat Bomag BP 20/50 Bedienungsanleitung

Altrad

Altrad BELLE RTX Bedienungsanleitung

Weber mt

Weber mt CF 1-II Hd Betriebsanleitung

TMG

TMG TMG-PC160K Bedienungsanleitung

swepac

swepac FB 430 Bedienungsanleitung

Weber mt

Weber mt SRV 590-II Betriebsanleitung

Makita

Makita VR001G Bedienungsanleitung

Euro Shatal

Euro Shatal TC63 Bedienungsanleitung

ADENDORFF

ADENDORFF TRE-85 Bedienungsanleitung

Husqvarna

Husqvarna EP 121B Bedienungsanleitung

Technoflex

Technoflex Kangaroo Kn-18GH Leitfaden

MQ Multiquip

MQ Multiquip Mikasa MTR-40HS Leitfaden

Masalta

Masalta MDR65 Series Bedienungsanleitung

Weber mt

Weber mt SRV 300-II Betriebsanleitung

SPERO

SPERO SP1400 Bedienungsanleitung

Weber mt

Weber mt CR 2 Betriebsanleitung

Flextool

Flextool TUFFTRUK EB500 Bedienungsanleitung

Dynapac

Dynapac Svedala Demag EB 34 Series Fehlerbehebungshandbuch