Multitech MultiModem ISI5634UPCI-4 Bedienungsanleitung
Intelligent Serial Interface
Server Cards
ISI5634UPCI & ISI9234PCIE
Quick Start Guide
ISI Quick Start Guide
2
Quick Start Guide
P/N 82010753L, Revision D
Models ISI5634UPCI-4 & ISI5634UPCI-8
Models ISI9234PCIE-4 & ISI9234PCIE-8
This publication may not be reproduced, in whole or in part, without prior
expressed written permission from Multi-Tech Systems, Inc. All rights reserved.
Copyright © 2008 by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representation or warranties with respect to the
contents hereof and specifically disclaims any implied warranties of merchantability or
fitness for any particular purpose. Furthermore, Multi-Tech Systems, Inc. reserves
the right to revise this publication and to make changes from time to time in the content
hereof without obligation of Multi-Tech Systems, Inc. to notify any person or
organization of such revisions or changes.
Record of Revision
Revision Date Description
A 01/15/04 Manual released.
B10/24/07 Add PCI Express-bus architecture.
C04/14/08 Remove ISI Management Software procedures.
D 06/06/08 Remove ISI4604/8 Serial Cards, and add procedures for
Windows Server 2008 Operating System support.
Trademarks
MultiModem, Multi-Tech, and the Multi-Tech logo are trademarks of Multi-Tech
Systems, Inc.
Microsoft, Windows 2000, 2003, XP, Vista, 2008 are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112
Phone: 763-785-3500 or 800-328-9717
Fax: 763-785-9874
Technical Support
Country By Email By Phone
(763) 717-5863
Internet Address: http://www.multitech.com
ISI Quick Start Guide
3
Safety Warnings
zThis product must be installed by a qualified service person.
zWhen installing or servicing this product, the phone lines must be disconnected
to remove the risk of hazardous voltages.
zNever install telephone wiring during a lightning storm.
zNever install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
zThis product is to be used with UL and CUL listed computers.
zNever touch uninsulated telephone wires or terminals unless the telephone line
has been disconnected at the network interface.
zUse caution when installing or modifying telephone lines.
zAvoid using a telephone (other than a cordless type) during an electrical storm.
There may be a remote risk of electrical shock from lightning.
zDo not use the telephone to report a gas leak in the vicinity of the leak.
Hardware Installation Procedures
To install the ISI Card into your PCI-bus computer, follow the steps presented
below.
1. Turn off your computer and any peripheral equipment connected to it. The ISI
Card can be installed in a Pentium equivalent PCI bus computer.
2. Remove the cover of your computer as instructed in your computer's
documentation.
3. Before handling the ISI Card, discharge any static in your body by touching a
piece of grounded metal such as the computer chassis.
ISI5634UPCI-8
ISI9234PCIE-8
ISI Quick Start Guide
4
4. Carefully remove the ISI Card from its antistatic bag, handling it only by the
mounting bracket and edges. Do not touch the gold-plated connectors along the
bottom edge. (You may want to save packaging for possible future use.)
5. Locate the unused PCI slot you will be using for your ISI Card and remove the
slot cover according to instructions in your computer's documentation.
6. Install the ISI Card into the selected expansion slot in the same manner as any
other add-on card, as instructed in your computer’s documentation.
7. Fasten the retaining bracket to the computer chassis and replace cover on the
computer.
8. Cabling.The -4 card has one RJ-45 receptacle and one fan-out cable; the -8
card has two RJ-45 receptacles and two fan-out cables. Each fan-out cable
extends connections for four modems from the RJ-45 plug to four RJ-11 plugs.
Each RJ-11 plug should then be attached to a phone line receptacle. Attach the
RJ-45 connector into the appropriate RJ45 receptacle on the ISI Server card.
To view a pinout diagram of the Server Card Fan-Out Cables, see Appendix A in
the user guide.
Fan-Out Cable for ISI Server Card
ISI Quick Start Guide
5
Software Installation
Introduction
The ISI Card ships with software/drivers for each of the following operating systems:
Windows® 2008, Vista, XP, 2003, 2000 Server, and 2000 Advanced Server, and
Linux. You may need to configure the modems for your country/region, the procedure
for doing this is at the end of this Guide.
For additional Windows Operating System Software Installation Procedures, refer to
the User Guide.
Installing a device driver modifies your system. For this reason, only the super user
(system administrator) is allowed to perform the installation. If you cannot login as
administrator, find the person in your organization with this authorization (i.e.,
password). To begin driver installation, login as administrator.
Driver Installation for Windows Server 2008 and Vista
The following driver installation procedure is based on Windows Server 2008 64-bit
Operating System. The procedure may vary slightly for the Windows Server 2008 32-
bit Operating System
Card Driver Installation
1. Power up your computer.
2. Windows Server 2008 will detect the ISI Card. A screen from the tray area, at
the bottom right of the screen will appear briefly Installing Device Driver
Software.
3. The Found New Hardware screen appears for Windows to install driver
software for your PCI Serial Port.
Click on Locate and install driver software (recommended). Windows
will guide you through the process of installing driver software for your
device.
ISI Quick Start Guide
6
4. A Found New Hardware – PCI Serial Port screen appears and asks: Allow
Windows to search online for driver software for your PCI Serial Port?
Select Don’t search online.
5. The next screen prompts you to Insert the disc that came with your PCI
Serial Port. If you have the disc that came with your card, insert it now.
Click Next.Windows may prompt you to search online, but this is not
necessary.
ISI Quick Start Guide
7
6. Searching disc for software…screen appears.
7. Windows can’t verify the publisher of this driver software screen appears.
Click Install.
8. When the software for this device has been successfully installed screen
appears, Windows has finished installing the driver software for this device:
Multi-Tech ISI5634UPCI/ISI9234PCIE 8 Port Analog Modem Card.
Click Close.
ISI Quick Start Guide
8
Installation of the Communications Port
9. A Found New Hardware – Multifunction Device screen appears and asks:
Allow Windows to search online for driver software for your Multifunction
Device?
Select Don’t search online.
10. The Found New Hardware – Multifunction Device screen appears. If you have
the disc that came with your device, insert it now.
The ISI Card CD is still in the CD ROM drive. Click Next.
ISI Quick Start Guide
9
11. Searching disc for software…screen appears.
12. Windows can’t verify the publisher of this driver software screen appears.
Click Install.
13. The Found New Hardware – Multi-Tech Communications Port (COM3)
screen appears. The software for this device has been successfully installed.
Windows has finished installing the driver software for this defvice: Multi-
Tech Communications Port.
Click Close.
ISI Quick Start Guide
10
14. If you open Device Manager, you will see Other devices with four
Multifunction Devices for the ISI-4 Card. Similarly, for the ISI-8 Card you will
see eight Multifunction Devices.
Installation of the Modem
15. A Found New Hardware – Multifunction Device screen appears and asks:
Allow Windows to search online for driver software for your MultiTech
Systems MT9234SMI?
Select Don’t search online.
Andere Handbücher für MultiModem ISI5634UPCI-4
2
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Multitech Computerhardware Handbücher
Multitech
Multitech RouteFinder RF802WLC Bedienungsanleitung
Multitech
Multitech ISI3334/EC Referenzhandbuch
Multitech
Multitech MultiConnect Dragonfly MTQ-MNG6-B02 Anwendungshandbuch
Multitech
Multitech MultiModem ISI9234HPCIE Bedienungsanleitung
Multitech
Multitech CommPlete MTPRI-HD23B Bedienungsanleitung
Multitech
Multitech MT5600SMI Bedienungsanleitung
Multitech
Multitech ISI4608-PCI Bedienungsanleitung
Multitech
Multitech MultiModem ISI9234PCIe-4 Bedienungsanleitung
Multitech
Multitech ISI551PC Bedienungsanleitung
Multitech
Multitech MultiModem ISI ISI5634UPCI Series Bedienungsanleitung
Multitech
Multitech QuickCarrier USB-D MTD-MNA1 Bedienungsanleitung
Multitech
Multitech MultiModem ISI ISI5634UPCI Series Bedienungsanleitung
Multitech
Multitech MTDOT-915 Series Bedienungsanleitung
Multitech
Multitech MultiMobile MT10ZLX/E Bedienungsanleitung
Multitech
Multitech MultiVOIP MVP24-48 Bedienungsanleitung
Multitech
Multitech MultiMobile MT56128ZLX-NT Bedienungsanleitung
Multitech
Multitech MultiConnect Dragonfly MTQ-L1G2D Anwendungshandbuch
Multitech
Multitech MULTIVOIP MVP-410 Bedienungsanleitung
Multitech
Multitech CommPlete MTPRI-HD23B Handbuch
Multitech
Multitech ISI608PC Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Panasonic
Panasonic DV0PM20105 Bedienungsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
