Multitech CommPlete MR9600-100 Bedienungsanleitung

MR9600-100 Controller

User Guide

MR9600-100 Controller User Guide

P/N 82067502, Revision C

written permission from Multi-Tech Systems, Inc.

Multi-Tech Systems, Inc. makes no representation or warranties with respect to the contents hereof and

specifically disclaims any implied warranties of merchantability or fitness for any particular purpose.

Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes

from time to time in the content hereof without obligation of Multi-Tech Systems, Inc., to notify any

person or organization of such revisions or changes.

Revision Date Description

7/25/97

5/11/98

12/23/98

Manual released.

Manual revised to include new controller commands.

Manual revised to reflect product changes.

Multi-Tech, CommPlete, RASExpress, MultiModem, MultiModemManager, and the Multi-Tech logo are

trademarks of Multi-Tech Systems, Inc. Other trademarks and trade names mentioned in this publication

belong to their respective owners.

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112

(612) 785-3500 or (800) 328-9717

U.S. Fax (612) 785-9874

Technical Support (800) 972-2439

BBS (612) 785-3702 or (800) 392-2432

Fax Back (612) 717-5888

Internet Address: http://www.multitech.com

CommPlete Communications Server iii

Federal Communications Commission Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy, and if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case the user will be

required to correct the interference at his own expense.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Important Safety Instructions

Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent

type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s

instructions.

The MR9600-100 Controller circuit board includes a battery that maintains the MR9600-100’s setup

information when it is turned off or disconnected from power. The battery can maintain the setup

information for approximately 10 years with no external power, and longer when the MR9600-100 is

turned on and operating normally. This battery is soldered onto the circuit board and cannot be replaced

by the user.

If, for some reason, the MR9600-100’s battery should fail, please contact Multi-Tech Technical Support at

(800) 972-2439 for replacement instructions.

iv CommPlete Communications Server

CommPlete Communications Server

Table of Contents

1 Introduction

Introduction ...................................................................................................................................................... 2

Product Description .......................................................................................................................................... 2

LED Indicators................................................................................................................................................... 2

Card Status LEDs .......................................................................................................................................... 3

MR9600-100 Ethernet Status LEDs .............................................................................................................. 3

Ethernet Switch LEDs ................................................................................................................................... 4

Connectors......................................................................................................................................................... 4

Duplex Mode Jumpers.................................................................................................................................. 5

MR9600-100 Controller Specifications ............................................................................................................. 5

Ethernet Switch Specifications ..................................................................................................................... 5

100BASE-TX Technology Overview.................................................................................................................. 6

Cables and Connectors.................................................................................................................................. 6

Topology ....................................................................................................................................................... 6

Network......................................................................................................................................................... 7

Hubs .............................................................................................................................................................. 7

Connectivity Rules ........................................................................................................................................ 7

Switching Technology ....................................................................................................................................... 7

Benefits of Switching .................................................................................................................................... 8

10/100 Switching Technology....................................................................................................................... 8

2 Installation

Introduction .....................................................................................................................................................12

Installation Procedure......................................................................................................................................12

Ethernet Cabling...............................................................................................................................................12

Serial Cabling....................................................................................................................................................13

Network Connections.......................................................................................................................................13

10M bps Ports ..............................................................................................................................................13

100M bps Ports ............................................................................................................................................13

Cable Types ..................................................................................................................................................13

Setting the Duplex Mode (JP1-JP5)..................................................................................................................14

3 Operation

Introduction .....................................................................................................................................................18

Security .............................................................................................................................................................18

File System........................................................................................................................................................18

Event Files.........................................................................................................................................................18

SNMP Interface.................................................................................................................................................19

Command Line Interface .................................................................................................................................19

Telnet Interface.................................................................................................................................................20

Web Browser Interface.....................................................................................................................................20

Logging In ....................................................................................................................................................21

Getting Modem Information.......................................................................................................................21

Controlling Modems....................................................................................................................................21

Web Interface Limitations...........................................................................................................................21

FTP Interface ....................................................................................................................................................21

vi CommPlete Communications Server

4 Commands

Parameter Types ..............................................................................................................................................24

Commands Listed by Function........................................................................................................................26

Commands Listed by Security Level................................................................................................................30

Command Reference........................................................................................................................................33

Error Messages.................................................................................................................................................77

5 Solving Problems

Introduction .....................................................................................................................................................82

MR9600-100 Diagnostic Tests .........................................................................................................................82

Appendix A - Connector Pinouts...................................................... 85

RJ-45 Connectors .............................................................................................................................................85

Index....................................................................................................................... 89

82067502

1 Introduction

MR9600-100 User Guide

2CommPlete Communications Server

Introduction

This manual describes the field installation of a Multi-Tech MR9600-100 Controller (henceforth, MR9600-

100) into a CommPlete Communications Server chassis. This manual also contains a reference guide to the

commands that are used to configure and control the MR9600-100. For configuration instructions, refer to

the System Installation and Quick Start section of you CommPlete documentation set.

Product Description

The MR9600-100 is the system controller module for the CommPlete Communications Server. The

MR9600-100 contains a built-in Web, FTP, and Telnet server, an embedded SNMP agent, and an

unmanaged Ethernet switch module. Its complete management capabilities allow the CommPlete

Communications Server and its segments to be managed remotely across any TCP/IP network.

LED Indicators

The MR9600-100 front panel contains the following LED indicators.

•Card status LEDs 1–16

•MR9600-100 Controller Ethernet status LEDs 1–4

•Ethernet switch LEDs

Figure 1. MR9600-100 Controller front panel.

1 Introduction

CommPlete Communications Server 3

Card Status LEDs

The lower part of the MR9600-100’s front panel contains 16 two-color LED indicators, one for each card

slot in the CC9600 chassis. The slots are numbered 1 through 16 from left to right. The LEDs indicate the

state of the device cards installed in the CC9600 chassis. When the MR9600-100 is turned on, the lights go

through the following sequence before they act as status indicators for the device cards.

1. The LEDs on the right side turn red and then turn green when the right SIMM passes its memory

test.

2. The LEDs on the left side turn red and then turn green when the left SIMM passes its memory test.

3. The LEDs stay green for about five seconds while the flash boot code waits for a handshake sequence

on the diagnostic serial port.

4. If none is detected (this is normal unless the firmware is being updated through the diagnostic port)

the main controller code starts running and the LEDs are turned off.

5. The LEDs are turned on and off, one at a time, red and green.

6. All LEDs turn green while the system starts up.

7. After the system has started, the LEDs reflect the status of the device cards. Each LED will be in one

of the following states, depending on the device card.

LED Color Device Card Status

Off Card not installed.

Green Card installed and all devices are communicating with the MR9600-100.

Red Card installed and none of the devices are communicating with the

MR9600-100.

Flashing

Red/Green

Card installed and one or two devices are not communicating with the

MR9600-100.

MR9600-100 Ethernet Status LEDs

The lower part of the MR9600-100 front panel contains four indicators that show the status of the

MR9600-100 Controller’s Ethernet port.

LED Indicator Color Indication

LI Link Integrity Yellow On during a good link

CS Collision Sense Red On when there is a collision on the Ethernet port

TX Transmit Green On during Ethernet transmit

RX Receive Green On during Ethernet receive

MR9600-100 User Guide

4CommPlete Communications Server

Ethernet Switch LEDs

The upper part of the MR9600-100 front panel contains 10 status indicators for the Ethernet switch.

LED Indicator Indication

UTILIZATION Percentage of bandwidth in use. Each LED that is on represents a

16.7% increment in use. The lower 4 LEDs are green, and the two

LEDs indicating highest activity are yellow.

CC9600 (LINK) On during a valid Ethernet link on a 10 Mbps port.

LAN (LINK)

CC9600 (100 MB)

LAN (100 MB)

On during a valid Ethernet link on a 10 Mbps LAN port.

On during a valid Ethernet link on a 100 Mbps port. Off during a 10M

bps connection.

On during a valid Ethernet link on a 100 Mbps LAN port. Off during a

10M bps connection.

Connectors

The MR9600-100 has three connectors that are accessible from the rear of the CC9600 chassis.

Figure 2. MR9600-100 connectors.

Connector Type Function

CC9600 RJ-45 Crossover 10/100M bps network connector. The transmit

and receive pairs of wires are swapped so the connector

can be used with a straight-through cable to connect the

CommPlete Communications Server to an external switch or

to the LAN connector on another CommPlete

Communications Server.

LAN RJ-45 Straight-through 10Base-T network connector. Use with a

straight-through cable to connect the CommPlete

Communications Server to a network card in a server, to a

network wall connector, or to the CC9600 connector on

another CommPlete Communications Server.

CONFIG PORT Male DB-9 RS-232C configuration port for MR9600-100 Controller.

Inhaltsverzeichnis

Andere Multitech Controller Handbücher

Multitech

Multitech MR4800E Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung