Multitech MultiVOIP MVP200 Bedienungsanleitung

Voice / Fax over IP Networks

Standalone Voice/IP Gateway

Model MVP200

Quick Start Guide

82098175 Revision A

MultiVOIP 200 (Model MVP200)

This publication may not be reproduced, in whole or in part,

without prior expressed written permission from Multi-Tech

Multi-Tech Systems, Inc. makes no representations or warranties

with respect to the contents hereof and specifically disclaims any

implied warranties of merchantability or fitness for any particular

purpose. Furthermore, Multi-Tech Systems, Inc. reserves the right

to revise this publication and to make changes from time to time in

the content hereof without obligation of Multi-Tech Systems, Inc. to

notify any person or organization of such revisions or changes.

Record of Revisions

Revision Description

AInitial Release; covers software version 2.01.

(5/5/99) Patents

This Product is covered by one or more of the following U.S.

Patent Numbers:

5.301.274; 5.309.562

;

5.355.365; 5.355.653;

5.452.289; 5.453.986

. Other Patents Pending.

TRADEMARK

Trademark of Multi-Tech Systems, Inc. is the Multi-Tech logo.

Windows is a registered trademark of Microsoft.

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112

(612) 785-3500 or (800) 328-9717

Fax 612-785-9874

Tech Support (800) 972-2439

Fax-Back (612) 717-5888

http://www.multitech.com

iii

Contents

Introduction ................................................................................... 4

Related Documentation................................................................. 5

MultiVOIPApplication.................................................................... 6

Installing Your MultiVOIP............................................................... 8

Unpacking Your MultiVOIP.......................................................... 10

Safety Warnings .......................................................................... 10

Cabling Your MultiVOIP................................................................11

Cabling Procedure .................................................................11

E&M Jumper Block Positioning Procedure ................................. 13

Phase 1: Configuring Your Master MultiVOIP ............................. 14

Software Loading .................................................................. 14

Phase 2: Configure Your Slave MultiVOIPs ................................ 30

Phase 3: Deploy the VOIP Network ........................................... 39

Limited Warranty ......................................................................... 42

Technical Support........................................................................ 43

FCC Declaration.......................................................................... 44

MultiVOIP Quick Start Guide

Introduction

Welcome to Multi-Tech's new stand-alone Voice/IP Gateway, the

MultiVOIP, model MVP200. The MultiVOIP allows analog voice

and fax communication over an IP network. Multi-Tech’s new

voice/fax gateway technology allows voice and fax

communication to ride, with no additional expense, over your

existing IP network, which has traditionally been data-only. To

access this free voice and fax communication, all you have to do

is connect the MultiVOIP to your telephone equipment, and then

to your existing Internet connection. Once configured, the

MultiVOIP then allows voice and fax to travel down the same path

as your traditional data communications.

The MVP200 has two independent voice/fax channels (each with

three voice/fax interfaces), a 10 Mbps Ethernet LAN interface,

and a command port for configuration.

System management is provided through the command port

using bundled Windows® software which provides easy-to-use

configuration menus and a comprehensive on-line Help

system.

Figure 1. MultiVOIP

Introduction

Related Documentation

The MultiVOIP200 Quick Start Guide is intended to be used by

qualified systems administrators and network managers. This

quick start provides the necessary information for a qualified

person to unpack, cable, load software, and configure the unit

for proper operation.

A detailed MultiVOIP200 User Guide is also provided (on

diskette) with your unit and provides in-depth information on

the features and functionality of Multi-Tech’s MultiVOIP.

The diskette media is produced usingAdobeAcrobatTM for

viewing and printing the user guide. To view or print your copy

of a user guide, loadAcrobat ReaderTM on your system. The

Acrobat Reader is a free download fromAdobe’s web Site:

http://www.adobe.com/prodindex/acrobat/readstep.html

Once loaded on your computer, launch the Reader and select

the .pdf file from the diskette.

The MultiVOIP200 User Guide is also available on Multi-Tech’s

Web site at:

http://www.multitech.com

Viewing and printing a user guide from the Web also requires

that you have the Acrobat Reader loaded on your system. To

select the MultiVOIP200 User Guide from the MTS home page,

click Support | Manuals and then click MultiVOIP in the product

list.All MultiVOIP documents will be displayed and you can

choose

User Guide (MVP200)

to view or download the .pdf file.

MultiVOIP Quick Start Guide

MultiVOIP Application

In a typical MultiVOIP application, two or more MultiVOIPs are

deployed at various sites on the Internet. Each MultiVOIP is

assigned a static IP address that must be accessible from the

Internet.

Router RouterInternet

Hub Hub

LAN LAN

IP Address

204.22.122.XXX

IP Address

204.56.39.XXX

Figure 2. Existing IP Network

When you have an existing network, all you have to do is

connect the MultiVOIP into your network, assign a specific

static IP address for the MultiVOIP, and then build your

personalized phone directory to communicate between

MultiVOIPs.

Master MultiVOIP

IP Address

204.22.122.118

Slave MultiVOIP

Router RouterInternet

Hub Hub

LAN LAN

Router IP Address

204.22.122.1

Router IP Address

204.56.39.10

#201

Channel 1Channel 1

#101

IP Address

204.22.122.XXX

IP Address

204.56.39.XXX

Figure 3. Add MultiVOIPs to Existing IP Network

Introduction

A phone directory is maintained on one of the MultiVOIPs

which is configured as a “master.” This phone directory is

retrieved by the remaining “slave” MultiVOIPs on your IP

network.

Phone Book

# IP Address Channel Interface

101 204.22.122.118 1 FXS

201 202.56.39.100 1 FXS

Each phone number entry corresponds to a MultiVOIP’s IP

address and associated voice/fax channel number. With this

system, you need only update the “master” phone directory

when deploying additional MultiVOIPs to your IP network.

In the example application where analog telephones are

directly attached to the voice/fax channels; the user simply

picks up the attached phone and dials the extension of another

MultiVOIP. The phone on the remote MultiVOIP will ring and, if

answered, a conversation can take place.

MultiVOIP Quick Start Guide

Installing Your MultiVOIP

The basic steps of installing your MultiVOIP network involve

unpacking the units, connecting the cables, and configuring

the units using the included management software (MultiVOIP

Configuration). The recommended installation process

includes three phases that, when completed, result in a fully

functional Voice Over IP network. Ageneral description of

each phase is provided below, and detailed instructions follow

throughout the rest of this section.

Phase 1: Configure and Install Your Master MultiVOIP

As the first step, the VOIP administrator configures the

MultiVOIP designated as the “Master” unit. This includes the

assignment of a unique LAN IP address, subnet mask, and

Gateway IP address; as well as the selection of appropriate

channel interface type for each of the Voice/Fax channels.

Once all connections have been made, the VOIP administrator

configures the unit and builds the Phone Directory Database

that will reside with the Master unit.

Phase 2: Configure Your Slave MultiVOIP(s)

Once Phase 1 has been completed, the administrator moves

on to configure the MultiVOIP(s) designated as “Slave” units.

Again, unique LAN IP addresses, subnet masks, and Gateway

IP addresses are assigned, and each Voice/Fax channel is

configured for the appropriate channel interface type. When

this is done, the Phone Directory Database option is set to

Slave, and the IP address of the Master MultiVOIP is entered.

Once all Slave units are configured, the process moves on to

Phase 3.

Phase 3: Deploy the VOIP Network

The final phase of the installation is deployment of the

network. Through the first two phases, the VOIP administrator

controls configuration, so when the Slave MultiVOIPs are sent

to their remote sites, the remote site administrators need only

to connect the units to their LAN and telephone equipment.A

Cabling

full Phone Directory Database (supplied by the Master

MultiVOIP) will be loaded into their unit within minutes of being

connected and powered up.

The final task of the VOIPAdministrator is to develop the VOIP

Dialing Directory based on the Phone Directory Database and

telephone numbers of the interfacing telephone equipment; at

which point, a VOIP user can call any person on the VOIP

network.

MultiVOIP Quick Start Guide

Unpacking Your MultiVOIP

Remove all items from the box (See Figure 4).

MADE IN U.S.A

Figure 4. Unpacking

Safety Warnings

Caution: Danger of explosion if battery is incorrectly replaced.

A lithium battery on the voice/fax channel board provides

backup power for the time keeping capability. The battery has

an estimated life expectancy of ten years.

When the battery starts to weaken, the date and time may be

incorrect. If the battery fails, the board must be sent back to

Multi-Tech Systems for battery replacement.

The E&M, FXS, and Ethernet ports are not designed to be

connected to a Public Telecommunication Network.

Andere Handbücher für MultiVOIP MVP200

Inhaltsverzeichnis

Andere Multitech Tor Handbücher

Multitech

Multitech MultiVOIP MVP2400 Bedienungsanleitung

Multitech

Multitech MULTIVOIP MVP-210 Handbuch

Multitech

Multitech MultiVOIP 400 MVP400 Bedienungsanleitung

Multitech

Multitech MultiVOIP MVP400 Bedienungsanleitung

Multitech

Multitech MultiVOIP MVP2400 Bedienungsanleitung

Multitech

Multitech Conduit AP MTCAP-L4E1 Bedienungsanleitung

Multitech

Multitech ProxyServer MTPSR1-202ST Bedienungsanleitung

Multitech

Multitech Conduit MTCDT-246L-US-EU-GB Montageanleitung

Multitech

Multitech MULTIVOIP MVP-210 Bedienungsanleitung

Multitech

Multitech MultiVOIP MVP120 Bedienungsanleitung

Multitech

Multitech Conduit MTCDT-L4E1 Montageanleitung

Multitech

Multitech MultiVOIP GSM SIP-to-Cellular Gateways... Bedienungsanleitung

Multitech

Multitech MTAC-003 Montageanleitung

Multitech

Multitech MultiVOIP 800 MVP800 Bedienungsanleitung

Multitech

Multitech CallFinder CF100FX2 Bedienungsanleitung

Multitech

Multitech MultiConnect Conduit IP67 Base Station Bedienungsanleitung

Multitech

Multitech MultiVOIP MVP400 Bedienungsanleitung

Multitech

Multitech MultiConnect Conduit MTCDT-LAP3 Montageanleitung

Multitech

Multitech Conduit AP Bedienungsanleitung

Multitech

Multitech MultiConnect Conduit AP MTCAP-LNA3-915 Bedienungsanleitung

Multitech

Multitech MULTIVOIP MVP-210 Bedienungsanleitung

Multitech

Multitech MultiVOIP MVP110 Bedienungsanleitung

Multitech

Multitech MultiVOIP MVP120 Bedienungsanleitung

Multitech

Multitech MULTIVOIP MVP-2410 Bedienungsanleitung

Beliebte Tor Handbücher anderer Marken

LST

LST M500RFE-AS Bedienungsanleitung

Kinnex

Kinnex Media Gateway Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace 2N StarGate Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Bedienungsanleitung

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Bedienungsanleitung

Telsey

Telsey CPVA 500 - SIP Bedienungsanleitung

RTA

RTA 460A-NNA4 Technisches Datenblatt

Shaw

Shaw Gateway HDPVR Bedienungsanleitung

ABB

ABB VSN900 Kurzanleitung

Commander

Commander Pulse Bedienungsanleitung

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Bedienungsanleitung

NETGEAR

NETGEAR C6300BD Bedienungsanleitung

Amit

Amit CDW531AM Bedienungsanleitung

HMS

HMS Netbiter EasyConnect EC150 Bedienungsanleitung

Huawei

Huawei EchoLife HG620 Bedienungsanleitung

AT&T

AT&T U-verse 3801 Gebrauchs- und Pflegehandbuch

Logic IO

Logic IO RTCU MX2 turbo Bedienungsanleitung

Suttle

Suttle MediaMAX MXM-521 Bedienungsanleitung