Multitech MultiModem GPRS with Ethernet Interface Bedienungsanleitung

Wireless Modem User’s Guide

How It Works

Connecting a wireless modem to the Omniguard allows it to send and receive text

messages just like a regular wireless phone. The Omniguard can be configured to send

alarm notices and daily status reports to up to two wireless phones. In addition it can

respond to request for information from wireless phones and via email. If the Omniguard

is programmed using a PC, it is also possible to send alarm and/or daily status reports to

additional wireless phones and email addresses.

The Wireless Modem

Wireless communication requires a specially configured MultiTech MultiModem

GPRS wireless modem. In order to use the modem you will need to acquire a SIM card

from a wireless provider. The SIM card contains the phone number and connection

information for providers that use GSM technology. The two major wireless carriers

using GSM are AT&T and T-Mobile.

You have two options for setting up an account. You can establish a conventional

wireless contract where you are billed for monthly service. You may be able to set up

this type of account without even getting a phone, only a SIM card. If you must get a

phone, the SIM card can easily be removed and installed in the modem. Choose a

wireless plan that is best for the number of text messages you plan to send and receive

from the Omniguard. You will not need any regular calling minutes since the modem

will not make conventional phone calls.

Your second option is to use a prepaid wireless plan. Both AT&T and T-Mobile offer

plans with no contracts that allow text messaging. This is a good option if the number of

messages will not be too high. For example you can send 1000 messages with T-

Mobile’s prepaid plan if you purchase a $100 refill card and you have up to one year to

use the credit. You must monitor your account balance using online tools to make sure

you do not run out during a job. Keep in mind that if you’ve set up the Omniguard to

send text messages each time there is an alarm, you could send up to unown messages per

day.

Connecting

Follow the instructions in the Quick Start Guide included with the modem to insert

the card in the modem, attach the antenna, connect the power supply and plug it into a

power outlet.

If you Omniguard does not have a serial port, connect the modem serial cable to the

Omniguard USB Port Adapter serial port and plug the adapter into the appropriate port on

your Omniguard. For Omniguards with a serial port you can connect the modem serial

cable directly to the Omniguard. Your Omniguard must be running V6.14 or later

firmware to utilize a wireless modem.

With the Omniguard turned on and displaying the pressure, you should see the

wireless modem ready icon to the right of the pressure within a few minutes.

Authorizing

If you did not purchase your modem directly from Engineering Solutions it will need

to be authorized for use by the Omniguard. When your modem is connected and the

Omniguard is turned on, you will be informed that the modem is “Not Authorized” along

with a serial number. Contact Engineering Solutions, provide us with the serial number

shown on the screen and we will give the passcode to authorize the modem. To enter the

passcode into the Omniguard use the up and down arrow keys to change a digit and the

right and left arrow keys to move between the digits. When all the digits have been

entered press SAVE to authorize the modem. You will get the message “Modem ready”.

The modem will now work with any compatible Omniguard.

Configuring

Two wireless phone numbers can be programmed directly into the Omniguard. A text

message will be sent to each phone number when the Omniguard enters normal operation

and when an alarm condition occurs. The minimum time between alarm text messages is

limited to the Message Rate to prevent frequent messages if the unit is going in and out of

the alarm state.

Normal Operation Message

JOB:

1234 Jacksonville Ave N

NORMAL OP 12:59:16

Reply with 0 for menu.

Omniguard 4

# G400000

Alarm Message

>> ALARM <<

JOB:

1234 Jacksonville Ave N

ALARM 1: +0.010" WC

12:59:07 +0.011" WC

Reply with 0 for menu.

Omniguard 4

# G400000

Phone numbers programmed directly into the Omniguard will also receive a daily

summary indicating how long the unit was in normal operation, the number of alarms and

the total time the unit was in the alarm state. The summary report will be sent at 5:30pm

each day unless a Notify List has been selected (see below).

Daily Summary Message

DAILY SUMMARY

JOB:

1234 Jacksonville Ave N

IN NORMAL OP:

6hr 46min

ALARMS:

IN ALARM:

59min 12sec

Reply with 0 for menu.

Omniguard 4

# G400000

In order to support more wireless phone numbers along with email addresses, the

Omniguard can store up to four Notify Lists. These lists allow different phone numbers

and/or email addresses for alarm and normal operation notification and reports. They also

allow the report time to be changed. Notify Lists can only be created and programmed

into the Omniguard using the Omniguard Communications PC software available at

www.engsolinc.com. See the help that comes with the software for more information on

setting up Notify Lists.

To configure and test the wireless modem –

1. Connect the modem to the Omniguard as described above.

2. Highlight WIRELESS MODEM using up and down keys and press SELECT to

view or change the settings.

3. If desired, press up and down keys to change Cell # 1, the first of two wireless

phone numbers that can be programmed on the Omniguard. Once the first digit of

the number has been changed, use right and left keys to move to the other digits.

To delete the phone number, set the first digit to a blank.

4. Press right and left keys to move to Cell # 2. Again use up and down keys to

change the first digit of the phone number. Once the first digit of the number has

been changed, use right and left keys to move to the other digits.

5. Press right and left keys to move to Notify. If you have programmed one or more

Notify Lists into the Omniguard using the Omniguard Communications PC

software, you can select on of them using “up/down”.

6. Press right and left keys to move to Test Modem. When “Test” is selected,

pressing the SELECT key will cause a message to be sent to the Cell # 1 and Cell

# 2 phone numbers as well as any numbers or email addresses in the chosen

Notify List.

7. Press SAVE to save the settings and return to the Main Menu.

Pressing the EXIT key will return you to the Main Menu without saving the updated

settings.

Requesting Information

It is also possible to request information from an Omniguard connected to a wireless

modem. A text message or email is sent to the Omniguard which will reply with a report

based on the content of the message. The reports include a daily summary, overall job

summary, current status and settings. To get a complete list of reports the Omniguard can

provide send a text message or email with a “0” (zero) in the body of the message.

Text messages must sent to the Omniguard must be in the “short message” format and

are sent to the phone number of the wireless modem. Email message must be in plain text

format and should be sent to the email address provided by the wireless service provider.

For T-Mobile that address would be “[email protected]” and for AT&T it would

be “[email protected]” where “nnnnnnnnnn” is the phone number of the

wireless modem.

Note that when requesting information using email the reply from the Omniguard

may be truncated due to the length of the email address and limitations in the size of text

messages.

Sample replies…

Menu- “0” or unknown message

Reply with 1, 2, 3 or 4 to get report:

1-Current Status

2-Daily Summary

3-Entire Job

4-Settings

Omniguard 4

# G400000

Status- “1”

JOB:

1234 Jacksonville Ave N

STATUS:

Waiting Pressure

PRESSURE:

0.000" WC

Omniguard 4

# G400000

Daily Summary- “2”

DAILY SUMMARY

JOB:

1234 Jacksonville Ave N

IN NORMAL OP:

6hr 46min

ALARMS:

IN ALARM:

59min 12sec

Reply with 0 for menu.

Omniguard 4

# G400000

Job Summary-“3”

JOB SUMMARY

JOB:

1234 Jacksonville Ave N

START:

02-01-09 8:00

IN NORMAL OP:

23hr 46min

ALARMS:

IN ALARM:

59min 12sec

Omniguard 4

# G400000

Settings-“4”

SETTINGS

MEM EST DAYS LEFT:

100

DATE & TIME:

01-01 12:00

ALARM 1:

-0.025" WC

ALARM 2:

-0.050" WC

PRINTER: Off

Omniguard 4

# G400000

Tips

•It is very helpful to make use of the Job capabilities of the Omniguard

including the use of Job Names. When start work at a new job site, press the

START JOB key on the Omniguard and enter a meaningful name for the job,

such as the address. This will make the reports easier to identify since they all

use the Job Name. The Job Summary will also accurately reflect work done.

•By entering an email address into the list of Report Targets in a notify list, you

can have a daily summary of the job sent to you automatically.

Andere Handbücher für MultiModem GPRS with Ethernet Interface

Inhaltsverzeichnis

Andere Multitech Modem Handbücher

Multitech

Multitech MultiModem ZPX MT5634ZPX-PCI Series Bedienungsanleitung

Multitech

Multitech MT5600BA Bedienungsanleitung

Multitech

Multitech SocketModem Cell Cat M1 Anwendungshandbuch

Multitech

Multitech MultiModem GPRS with Ethernet Interface Bedienungsanleitung

Multitech

Multitech MTD100U Bedienungsanleitung

Multitech

Multitech MultiConnect Cell 100 series Bedienungsanleitung

Multitech

Multitech MTE-Series Bedienungsanleitung

Multitech

Multitech MultiModem ZBA MT9234ZBA Bedienungsanleitung

Multitech

Multitech MultiModem iCell Bedienungsanleitung

Multitech

Multitech MT5656ZDX Series Bedienungsanleitung

Multitech

Multitech MultiModem MTCBA?H3?U1 Bedienungsanleitung

Multitech

Multitech MultiVOIP MVP200 Bedienungsanleitung

Multitech

Multitech MultiConnect MTC-LAT1-B02 Bedienungsanleitung

Multitech

Multitech MultiModem ISI ISI5634UPCI Series Bedienungsanleitung

Multitech

Multitech MTCBA-C-EN-N1 Bedienungsanleitung

Multitech

Multitech MultiModem ZPX MT9234ZPX-PCIE-NV-CP Bedienungsanleitung

Multitech

Multitech MultiModem MT4X56USB Bedienungsanleitung

Multitech

Multitech MTCBA-E-U Bedienungsanleitung

Multitech

Multitech MT128NTZLX Bedienerhandbuch

Multitech

Multitech MT2834BA Bedienungsanleitung

Multitech

Multitech QuickCarrier USB-D MTD-H5 Bedienungsanleitung

Multitech

Multitech GPRS Bedienungsanleitung

Multitech

Multitech MultiModem SocketModem MT9234 Series Installationshandbuch

Multitech

Multitech QuickCarrier USB-D MTD-MNA1 Bedienungsanleitung

Beliebte Modem Handbücher anderer Marken

Davicom

Davicom DM562AP Bedienungsanleitung

EpiValley

EpiValley TATA indicom SXC-1080 Bedienungsanleitung

Zte

Zte WiMAX Bedienungsanleitung

Intelimax

Intelimax MA-2060 Bedienungsanleitung

SMC Networks

SMC Networks D3CM1604V Gebrauchs- und Pflegehandbuch

Telstra

Telstra Wi-Fi 4G Advanced Pro X Bedienungsanleitung

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Bedienungsanleitung

Samsung

Samsung AceLink SAM-335A Bedienungsanleitung

Enfora

Enfora Enabler-G Kurzanleitung zur Einrichtung

iRZ

iRZ ATM2-232 Bedienungsanleitung

Zhone

Zhone 6310 Bedienungsanleitung

Paradyne

Paradyne Hotwire 7976 Bedienungsanleitung

US Robotics

US Robotics 3453C Bedienungsanleitung

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Bedienungsanleitung

Zte

Zte MF823 Bedienungsanleitung

Four-Faith

Four-Faith F1403 Bedienungsanleitung

Sierra Wireless

Sierra Wireless AIRLINK MP595W Bedienungsanleitung

Gemtek

Gemtek WiMAX WIXFBR-103 Bedienungsanleitung