Multitech MultiConnect WF MTS2WFA Bedienungsanleitung

MultiConnect™WF

Serial-to-Wi-Fi®Device Server

MTS2WFA

MTS2WFA-R

User Guide

Multi-Tech Systems, Inc. MultiConnect WF User Guide (S000447A) 2

MultiConnect WF

Serial-to-Wi-Fi Device Server

MTS2WFA and MTS2WFA-R

User Guide

S000447A Rev. A

This publication may not be reproduced, in whole or in part, without prior expressed written permission

Multi-Tech Systems, Inc. makes no representations or warranty with respect to the contents hereof and

specifically disclaims any implied warranty of merchantability or fitness for any particular purpose.

Furthermore, Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes

from time to time in the content hereof without obligation of Multi-Tech Systems, Inc. to notify any person

or organization of such revisions or changes.

Revision Date Description

A11/19/07 Initial release.

Trademarks

Multi-Tech and the Multi-Tech logo are registered trademarks of Multi-Tech Systems, Inc.

MultiConnect is a trademark of Multi-Tech Systems, Inc. Wi-Fi is a registered trademark of the Wireless

Ethernet Compatibility Alliance (WECA).

All other brand and product names mentioned in this publication are trademarks or registered trademarks

of their respective companies.

World Headquarters

Multi-Tech Systems, Inc.

2205 Woodale Drive

Mounds View, Minnesota 55112 U.S.A.

(763) 785-3500 or (800) 328-9717

Fax (763) 785-9874

http://www.multitech.com

Technical Support

Country By Email By Phone

Europe, Middle East, Africa [email protected] (44) 118 959 7774

U.S., Canada, all others support@multitech.com 800-972-2439 or 763-717-5863

Table of Contents

Multi-Tech Systems, Inc. MultiConnect WF User Guide (S000447A) 3

Contents

Chapter 1 – Product Description and Specifications..............................................................................4

Introduction................................................................................................................................................4

Benefits......................................................................................................................................................4

General Safety...........................................................................................................................................4

Radio Frequency Interference...............................................................................................................4

Handling Precaution...................................................................................................................................5

Ordering Information..................................................................................................................................5

Shipping Package Contents ......................................................................................................................5

AT Commands...........................................................................................................................................5

Technical Specifications ............................................................................................................................6

Antenna Specifications ..............................................................................................................................7

RF Interface...............................................................................................................................................7

Default Power Up Settings.........................................................................................................................7

LED Indicators ...........................................................................................................................................7

Chapter 2 – Installation and Cabling.........................................................................................................8

Attaching the MultiConnect WF to a Fixed Location..................................................................................8

Making the Connections ............................................................................................................................9

Directions for the MTS2WFA (Externally Powered) ..................................................................................9

Directions for the MTS2BTA-R (Powered through Pin 6 of an RS-232 Cable).........................................9

Pin Assignments for the Serial Port.........................................................................................................10

Optional – Directions for Direct DC Power Connection...........................................................................10

Appendix A – Waste Electrical and Electronic Equipment Statement ................................................11

Appendix B – Warranty and Repairs Policy...........................................................................................12

Multi-Tech Warranty Statement...............................................................................................................12

Replacement Parts..............................................................................................................................13

Index...........................................................................................................................................................14

Chapter 1 – Product Description and Specifications

Multi-Tech Systems, Inc. MultiConnect WF User Guide (S000447A) 4

Chapter 1 – Product Description and

Specifications

Introduction

The MultiConnectTM WF device server connects serial devices to an IP network via 802.11b wireless

networking. It enables you to build wireless networking into virtually any device allowing for remote

monitoring, control and configuration. The device server integrates a complete TCP/IP protocol stack.

It can make your existing and next generation device, machine or system, IP-ready while you focus on

developing its core features.

Benefits

•Serial-to-802.11b wireless networking

•Flexible IP protocol stack

•Compact, rugged industrial chassis

General Safety

The MultiConnectTM WF device server is designed and intended to be used in either fixed or mobile

applications. In the “Fixed” application, the device is physically secured at one location and not easily

moved to another location. In the “Mobile” application, the device may be regularly moved to different

locations.

Caution! Maintain a separation distance of at least 20 cm (8 inches) between the transmitter’s

antenna and the body of the user or nearby persons. The adapter is not designed for, nor intended

to be, used in applications within 20 cm (8 inches) of the body of the user. Such uses are strictly

prohibited.

Radio Frequency Interference

Avoid possible radio frequency (RF) interference by carefully following the safety guidelines below.

•Switch OFF the MultiConnectTM WF device server when in an aircraft. It may endanger the

operation of the aircraft.

•Switch OFF the MultiConnectTM WF device server in the vicinity of gasoline or diesel-fuel pumps or

before filling a vehicle with fuel.

•Switch OFF the MultiConnectTM WF device server in hospitals and any other place where medical

equipment may be in use.

•Respect restrictions on the use of radio equipment in fuel depots, chemical plants, or where

blasting operations are in progress.

•There may be a hazard associated with the operation of your MultiConnectTM WF device server in

the vicinity of inadequately protected personal medical devices such as hearing aids and

pacemakers. Consult the manufacturers of the medical device to determine if it is adequately

protected.

•Operation of theMultiConnectTM WF device server in the vicinity of other electronic equipment may

cause interference if the equipment is inadequately protected. Observe any warning signs and

manufacturers’ recommendations.

Chapter 1 – Product Description and Specifications

Multi-Tech Systems, Inc. MultiConnect WF User Guide (S000447A) 5

Handling Precaution

All devices must be handled with certain precautions to avoid damage due to the accumulation of static

charge. Although input protection circuitry has been incorporated into the devices to minimize the effect of

this static buildup, proper precautions should be taken to avoid exposure to electrostatic discharge during

handling and operation.

Ordering Information

Model # Product Description Product Region

MTS2WFA Serial-to-Wi-Fi 802.11b Device Server (externally powered) Regional

MTS2WFA-R Serial-to-Wi-Fi 802.11b Device Server (powered through pin 6 of an

RS-232 cable) Regional

Shipping Package Contents

•One MultiConnect WF device server

•One 5 dbi reverse SMA antenna

•One mounting bracket

•One power supply (with MTS2WFA only)

•A set of four self-adhesive rubber feet

•One printed Quick Start Guide

•One MultiConnect WF CD containing the User Guide, Quick Start Guide, AT Commands

Reference Guide, and Acrobat Reader.

AT Commands

AT commands for this product are published in a separate Reference Guide included on the product CD

and posted on the Multi-Tech Web site.

Chapter 1 – Product Description and Specifications

Multi-Tech Systems, Inc. MultiConnect WF User Guide (S000447A) 6

Technical Specifications

Category Description

Standard IEEE 802.11b

Data Rate 1, 2, 5.5, 11 Mbps

Data Format For Serial Interface - Asynchronous, 8-N-1, Default is 115K bps

Flow Control Hardware flow control

Mode Ad Hoc, Infrastructure

Dimensions 3.5” w x 2.1”h x 0.98” d; (8.8 cm x 5.3 cm x 2.4 cm)

Weight 3.4 oz. ( 96 g)

Voltage 5VDC to 24VDC

Power Requirements 190mA @ 5VDC

110mA @ 9VDC

85mA @ 12VDC

46mA @ 24VDC

Operating Temperature -40°C to +85°C tested

Note: UL listed @ +40°C (limited by the power supply)

Storage Temperature -40°C to +85°C

Humidity 25-85% noncondensing

Antenna Connector Reverse SMA

Approvals Certifications:

CE Mark

EMC Approvals:

FCC Part 15 Subpart B Class B

FCC Part 15 Subpart C 15.247

FCC Part 2

EN 55022

EN 55024

Canada ICES-003 (Class B)

Canada R55-210 Issue 7

Canada R55-Gen Issue 2

EN 300 328

EN 301 489-17

EN 301 489-1

Safety:

UL 60950-1

cUL 60950-1

EN 60950-1

Intelligent Features Complete serial-to-Wi-Fi wireless connectivity solution including network

processor, media access controller and air interface

Supports ad-hoc and infrastructure mode

Security: 64/128 bit WEP

Serial interface supports DTE speeds to 230K bps

Wi-Fi security using WAP

Network Protocols: ARP, DHCP client, DNS, FTP client, ICMP (ping), IP,

POP3, SMTP, TCP and UDP

Configuration and management via AT commands

Flash memory to update firmware with the latest enhancements

Desktop or panel mounting

Warranty Two Years

Chapter 1 – Product Description and Specifications

Multi-Tech Systems, Inc. MultiConnect WF User Guide (S000447A) 7

Antenna Specifications

Category Description

Frequency Range 2.4-2.5 GHz

Impedance 50 ohm nominal

VSWR <2.0:1

Gain 5 dBi

Radiation Omni

Polarization Vertical

Connector Reverse Polarity SMA Plug

RF Interface

Radio Characteristics

Frequency 2.400 to 2.484 GHz

Modulation DSSS

Number of Channels 1 to 14

Transmission Rate 1, 2, 5.5, 11 Mbps

RF Receive Sensitivity -82 dBm

RF Transmit Power 16 dBm maximum

Default Power Up Settings

Baud Rate = 115200bps

Data Bits = 8 bits

Parity = None

Stop bits = 1 bit

Hardware Flow Control RTS/CTS = Disabled

LED Indicators

LED Description

TD Transmit Data. This LED is lit when the adapter is transmitting data on the serial port.

RD Receive Data. This LED is lit when the adapter is receiving data on the serial port.

CD Carrier Detect. This LED is lit when the adapter detects a valid carrier signal on the

serial port.

It is on when the serial port has a valid connection.

TR Terminal Ready. (Also called Data Terminal Ready.) This LED indicates the PC is

turned on and ready to communicate. It is lit when a data communications program

initializes the adapter. It goes off when the communications program disconnects the

COM port. When it goes off, a connected adapter will disconnect.

802.11 LNK Wi-Fi Link. This LED is lit when there is a valid link for a Wi-Fi connection.

802.11 ACT Wi-Fi Activity. This LED is on while there is Wi-Fi activity.

PWR Power. This LED Indicates the presence of DC power when lit.

Chapter 2 – Installation and Cabling

Multi-Tech Systems, Inc. MultiConnect WF User Guide (S000447A) 8

Chapter 2 – Installation and Cabling

Attaching the MultiConnect WF to a Fixed

Location

The MultiConnect WF is design to be used on the desktop or to be panel-mounted. To attach the bracket

for panel-mounting, following these steps:

1. Typically, it is mounted against a flat surface with two mounting screws. Drill the mounting holes

at the desired location. The mounting holes must be separated by 4 -15/16 inches center-to-

center.

2. To attach the mounting bracket, slide it into the corresponding slot on the back of the

MultiConnect chassis.

3. Attach the adapter to the surface with two screws.

Chapter 2 – Installation and Cabling

Multi-Tech Systems, Inc. MultiConnect WF User Guide (S000447A) 9

Making the Connections

Directions for the MTS2WFA (Externally Powered)

Turn off your PC. Place the MultiConnect WF in a convenient location. Connect it to your PC’s

serial port and plug in the power.

Directions for the MTS2BTA-R (Powered through Pin 6

of an RS-232 Cable)

Turn off your PC. Place the device server in a convenient location. Then connect it to your PC’s

serial port. The MTSWFA-R draws its power from the RS-232 cable's Pin 6.

Chapter 2 – Installation and Cabling

Multi-Tech Systems, Inc. MultiConnect WF User Guide (S000447A) 10

Pin Assignments for the Serial Port

Female End of the MultiConnect Wi-Fi Device Server

The following tables explain the MultiConnect Wi-Fi pin functions. The table on the right shows Pin 6

as the power supply for the MTS2WFA-R.

External Power

MTSWFA Powered

Through Pin 6

MTSWFA-R

Signal IN/OUT Signal IN/OUT

Pin 1 CD O Pin 1 CD O

Pin 2 TX O Pin 2 TX O

Pin 3 RX I Pin 3 RX I

Pin 4 DTR I Pin 4 DTR I

Pin 5 GND -- Pin 5 GND --

Pin 6 DSR O Pin 6* Power

Pin 7 CTS I Pin 7 CTS I

Pin 8 RTS O Pin 8 RTS O

Pin 9 RI O

MultiConnect Wi-Fi

Female Connector

Pin 9 RI O

*Warning:

When supplying power to the RS-232 connector of the adapter,

make sure the power does not feed the DTE device.

Optional – Directions for Direct DC Power

Connection

•Connect a fused DC power cable into the

power connector on the MultiConnect WF

device server.

•Then attach the two wires at the other end of

the fused cable to a DC fuse/terminal block on

a vehicle in which you are mounting the

MultiConnect WF device server.

•Connect the red wire to the "+" positive and

the black wire to the "–" negative. Be sure the

GND connection is correct.

Warning: Over-voltage protection is

provided on the device. To ensure

complete protection, you may want to

add additional filtering to the DC input.

Model Number for the Fused DC Power Cable: FPC-532-DC

Andere Handbücher für MultiConnect WF MTS2WFA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Multitech Server Handbücher

Multitech

Multitech MultiAccess MULTIACCESS MA30120 Bedienungsanleitung

Multitech

Multitech ProxyServer MTPSR2-201 Bedienungsanleitung

Multitech

Multitech CommPlete 4000 Series Bedienungsanleitung

Multitech

Multitech ProxyServer MTPSR1-202ST Bedienungsanleitung

Multitech

Multitech SocketWireless MT800SWM Bedienungsanleitung

Multitech

Multitech MultiArrayIII MA3a Bedienungsanleitung

Multitech

Multitech RASFinder RF300E Bedienungsanleitung

Multitech

Multitech FaxFinder FF-120 Bedienungsanleitung

Multitech

Multitech ProxyServer MTPSR3-200 Bedienungsanleitung

Multitech

Multitech FaxFinder FF100 Bedienungsanleitung

Multitech

Multitech FaxFinder FF240-IP Service-Handbuch

Multitech

Multitech PROXYSERVER MTPSR1-120 Bedienungsanleitung

Multitech

Multitech FaxFinder FF240 Service-Handbuch

Multitech

Multitech FaxFinder FF240-IP Service-Handbuch

Multitech

Multitech ProxyServer MTPSR3-100 Bedienungsanleitung

Multitech

Multitech MultiModem iSMS SF100-G Service-Handbuch

Multitech

Multitech FaxFinder FF240-IP Service-Handbuch

Multitech

Multitech MA100-1M Bedienungsanleitung

Multitech

Multitech ProxyServer MTPSR1-100 Bedienungsanleitung

Multitech

Multitech FaxFinder FF110 Bedienungsanleitung

Multitech

Multitech ProxyServer MTPSR3-200 Bedienungsanleitung

Multitech

Multitech FaxFinder FF130 Bedienungsanleitung

Multitech

Multitech CommPlete 4000 Bedienungsanleitung

Multitech

Multitech FaxFinder Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung