Multitone TLA 850 Bedienungsanleitung

Contents

Introduction and Getting Started ..............1

Switching the Pager On............................1

Status and Operating Symbols ................2

Setting the Time and Date........................4

Setting the Pager Alarm ...........................6

Selecting the Pager Alert .........................8

Receiving a Message .............................10

Reviewing Stored Messages ..................11

Archiving Messages ...............................12

Reviewing Archived Messages ..............13

Deleting Messages .................................13

Deleting All Messages............................14

Timed Off ................................................14

Reviewing Information Service

Messages .............................................16

Caring for your Pager .............................17

Fault-Finding ...........................................17

(i)

Releasing the Pager from the

Holster

Press on the bottom tag with your finger

and slide the pager upward.

(ii) 1

Introduction and Getting Started

Congratulations on selecting the TLA 850

alphanumeric pager from Multitone.Your

pager has all the features you expect of a

top class product yet it retains simplicity of

operation through the superbly designed

user interface and icon menu selection.

This guide will describe the operation of the

product and ensure that you receive the full

benefits of paging with the TLA 850.

On the back of your pager you will find the

battery cover. Press down on the centre

tab while sliding the battery cover outwards

to remove. Insert the battery into the

spring end first so that the + symbol on the

battery is aligned with the moulded +

symbol in the battery compartment.

Carefully slide the cover back into position.

Switching the Pager On

To turn the pager on press and hold the •>

button for one second. A short alert will

14:24 23.03.98

sound and the pre-programmed switch-on

message will be displayed.

After one second the time and date will be

shown. This is the standby screen:

Standby Screen

Status and Operating Symbols

The standby screen shows the current time

and date. It also shows if there are unread

messages,whether audible or vibrate alert

is selected and, if appropriate, gives low

battery and out-of-range warnings by

displaying the following symbols:

Status Symbols

14:26 23.03.98

From the standby screen press •>to enter

the pager options screen. The following

symbols are displayed:

Pager Option Screen

Unread Messages Low Battery

Audible Alert Out-of-Range

Vibrate Memory Full

The status symbols are as follows:

Archive

Alert Section

Time Setting and

Timed Off Setup

Off

Alarm Function

Backlight

Delete All

Messages

To turn the pager off press •>to show the

pager options screen and then press < or >

several times until the

symbol is

flashing. Press •>and the display will

show the symbol plus a flashing ?.

Press •>again to turn the pager off.

Setting theTime and Date

The standby screen will normally show the

time and date. To set the current time and

date press •>once to display the pager

options and then press < or >several times

until the symbol flashes. Press •>to

display the time function edit screen.

Time Function Screen

The clock symbol will flash. To set the

clock press •>and the clock symbol will

appear with 12 or 24 hour mode indicated.

The hour will flash and the correct value

may be selected by pressing either < or >.

Once the hour is correct press •>and the

tens of minutes will flash.

Press < or >until the correct number is

shown and then press •>.

Press < or >until the correct number is

shown and then press •> to set the

minutes.

The date is set with the same method.

5:27 pm 23.03.98

5:29 pm 23.03.98

Once the display shows the correct time

and date the 12 or 24 hour mode can be

selected by pressing the < or > buttons to

change as required.

Press and hold •>for one second to return

the pager to the standby screen.

Setting the Pager Alarm

The pager has a daily alarm feature and it

may be set by pressing the •>to show the

pager options and then selecting the

symbol using the < or >buttons.

Press the •>to display the alarm options

screen.

To turn the alarm on press < or >until the

symbol shows and the time that the

alarm is set to sound is displayed.

17:27 pm 23.03.98

To turn the alarm off press < or >until the

symbol shows and the alarm time is

turned off.

To change the alarm time press •>and the

hour will flash. Press < or >to change the

numbers and when the correct value is set

press •>and the tens of minutes will flash.

Press < or >to change the numbers and

when the correct value is shown press •>.

Press < or >until the minutes display is

correct and then press •>for one second to

return to the standby screen.

07:00

The display will show the symbol

indicating that the alarm is set. When the

alarm time is reached the standby screen

will show the symbol flashing and the

alert will sound for eight seconds. Pressing

any button within the eight second period

will stop the alert.

Selecting the Pager Alert

To set the alert on the pager press •>to

show the pager options and then press < or

> several times until the symbol is

flashing.

Press •>to display the alert options screen

which allows you to select the type of alert

that the pager produces when a call is

received. The pager has nine possible alert

settings. These are numbered 0 for No

alert, 1 for Vibrate alert and 2 to 8 for the

seven audible alerts. Press < or >to

change the alert and the pager gives you a

sample of the alert.

To stop the alert press any button.

If the vibrate alert is required then press

the < or >until the

symbol is displayed

and the pager will vibrate for one second.

The pager will now vibrate discreetly when

a call is received.

Once the desired alert has been selected

press •>for one second to return to the

standby screen. In the standby screen the

pager will now show the

symbol if the

audible alert has been selected.

The will be displayed if the vibrate alert

has been selected and will be displayed

if the no alert option is selected.

It is also possible to toggle rapidly between

audible and no alert by pressing and

holding the •>button for three seconds.

Receiving a Message

When receiving a message your pager will

either alert you audibly or vibrate as

selected. The alert will continue for eight

seconds or until you acknowledge receipt

of the message by pressing any of the

buttons on the front of the pager.The

received message will also be displayed

during this initial alert. If you are away from

your pager the alert will continue for eight

seconds after which the symbol will

be shown to indicate you have an unread

message. A reminder alert will sound

every five minutes during the following hour.

To display the message press the > button.

If the message length exceeds one screen

you can scroll through to the end of the

message by pressing the •>button. A !

symbol marks the end of each message.

Each message is time and date stamped

when received.This information can

subsequently be seen when the messages

are reviewed.

Reviewing Stored Messages

When the pager has received a new

message the standby display will show the

symbol. To scroll through received

messages starting with the newest

message press >. To read a particular

message select it using < or >and if the

message occupies more than one screen

pressing •>allows subsequent screens to

be viewed.

To return to the standby screen at any time

press •>for one second.

Once the pager has received 32 messages

its memory will be full and the standby

screen will show the symbol. If a new

message is received when the pager

memory is full then the oldest message will

be deleted. However, if there are no read

messages then the oldest unread message

will be deleted.

When the end of message block has been

viewed press •>to enter the message

options screen which contains the

message timestamp.

Archiving Messages

Archive messages by transferring them to

the pager archive store. To do this press >

followed by < or >several times to select

the message to be archived and then view

the complete message by pressing •>so

that the

symbol is seen.

Press •>again to enter the message option

screen and press < or > until the

symbol is flashing. Press •>and the

display will show the symbol plus a

flashing ?. Press •>to transfer the

message to the archive memory. If the

archive memory is full the symbol will

flash and a message must be deleted from

the archive memory before a new one can

be archived.

Reviewing Archived Messages

To view the contents of the archive

message memory starting with the most

recent message press the •>twice. Press

< or >to scroll through the messages.To

view a long message press •>to read

subsequent screens.

Deleting Messages

To delete messages from either the pager

message or archive memories first select

the message to be deleted using < or >and

then read the message using the •>button.

When the last screen of the message is

displayed press •>and press < or >until

symbol is flashing. Press •>and the

display will show the symbol plus a

flashing ?. Press •>to delete the

message.

Deleting All Messages

The pager message memory (but not the

archive store) may be completely erased by

pressing •>to show the pager options and

then pressing either the < or > until the

symbol is flashing. Press •>again and the

display will show the symbol plus

flashing ?. Press •>to delete all of the

messages.

Timed Off

The pager may be switched off and on at

preset times (e.g. overnight).

To set the off and on times press •>when

in the standby screen and then press either

< or >until the symbol is flashing.

Press •>then press the < or >until the

symbol is flashing. Then press •>to

display the timed off edit screen.

To disable the timed off feature press < or >

until the off and on times are not shown.

To enable the timed off feature press < or >

until the off and on times are shown.

The off and on times may be set by

pressing •>to select the hours or minutes

and < or >to adjust the values. Once the

desired times are displayed press •>for

one second to return to the pager standby

display and the symbol will show

indicating that the timed off feature is

active.

Reviewing Information Service

Messages

The Information services menu is reached

by pressing the < button when in the

standby screen. Each enabled service has

a number symbol.

Press < or >until the number symbol of the

the service you require is flashing then

press •>to display the service message.

To review other messages received on the

same service, press < or >until the

required message is displayed.

The ‘history depth’of each service has

been programmed at manufacture to

optimise the memory allocation for the

services provided.

To return to the information services menu

press •>repeatedly until the information

service menu is displayed.

To archive an information service message

use the same method as described for

archiving messages.

Caring for your Pager

Protect your pager from strong magnetic

fields, liquids, extreme temperatures and

long periods exposed to strong sunlight.

Clean the exterior of your pager using a

clean, soft, non-abrasive cloth. If

necessary, dampen cloth with water only.

Fault-Finding

If your pager appears to have a fault

please check the following:

•Is the pager switched on?

•Is the battery dead?

•Is the battery fitted correctly?

•Is the +ve sign on the battery aligned

with the moulded +ve sign in the battery

compartment?

Inhaltsverzeichnis

Andere Multitone Pager Handbücher

Multitone

Multitone EkoTek Bedienungsanleitung

Multitone

Multitone RPR 750IS SERIES Bedienungsanleitung

Multitone

Multitone RPR 530 SERIES Bedienungsanleitung

Multitone

Multitone EkoTek Pager Gebrauchsanweisung

Multitone

Multitone RPR 950 series Bedienungsanleitung

Multitone

Multitone RPR 580 Bedienungsanleitung

Multitone

Multitone RPR 581 Bedienungsanleitung

Multitone

Multitone MIT870 SERIES Bedienungsanleitung

Multitone

Multitone FLA870 Bedienungsanleitung

Beliebte Pager Handbücher anderer Marken

Alpha

Alpha Elite Bedienungsanleitung

LRS

LRS RX-E467 Bedienungsanleitung

Bellman & Symfon

Bellman & Symfon Visit BE1470 Bedienungsanleitung

unication

unication E3 Bedienungsanleitung

Infostream

Infostream X5 Montageanleitung

Motorola

Motorola BR850 Bedienungsanleitung

ACE TELECOM

ACE TELECOM ACE-2040 Bedienungsanleitung

Intek

Intek Allure Bedienungsanleitung

Pocsag

Pocsag PG-2092P Bedienungsanleitung

Motorola

Motorola Bravo classic Bedienungsanleitung

Motorola

Motorola LS750 Bedienungsanleitung

Alert Systems

Alert Systems HyperGuard MP10D Bedienungsanleitung

Motorola

Motorola Talkabout T900 Bedienungsanleitung

Motorola

Motorola Advisor Graphix CP1250 Bedienungsanleitung

Radio Shack

Radio Shack 17-7040 Bedienungsanleitung

PageOne

PageOne Advisor Graphix Bedienungsanleitung

Syscall

Syscall Nttworks GP-210RT Bedienungsanleitung

unication

unication G4 Bedienungsanleitung