User manual
Outdoor time switch
Scope of supply
• Time switch
• User manual
Specications
input voltage: 230V~50Hz
max. Power: 16(2)A, 3500W
features: 24-hours time switch
General information
To ensure that you can enjoy this product for many years to come, please read this
manual and store it in a safe place. With this time switch, you can conveniently and
easily control electric devices that are to be activated at a certain time or over a
longer time period.
Commissioning
1. Remove the product from the packaging and remove any remaining packaging
material.
2. Use the blue pins to set the desired time period.
3. Slowly turn the turntable clockwise to set the current time.
4. Connect the time switch to the desired socket. Make sure that the voltage corres-
ponds to the specications of the time switch.
5. The time switch is operational, you can now connect the device that is to be
controlled.
Settings
The time switch allows you to specify one or more time periods for which the
connected decive will be supplied with power. Set the time by pressing all the outer
pins within the desired time period. One pin corresponds to 15 minutes each. For
example, if the timer is to be activated 2 hours a day, a total of 8 pins have to be
pressed.
Set the time using the turntable afterwards. Turn it clockwise, until the arrow points
to the current time. One line corresponds to 15 minutes each, so one hour is divided
into four areas. For example, to set a time of 13:30, the turntable should be rotated
to the second line after the 13.
Maintenance
The device is maintenance-free, so please do not open the device. You will invali-
date your warranty if you open up the device. Clean the outside with a soft, dry
cloth or a brush.
Do not use any cleaning products that contain carbonic acid, benzene, alcohol or
similar substances. Such substances attack the surface of the device and their
vapours are also hazardous to health and explosive. Do not use any sharp-edged
tools, screwdrivers, wire brushes or similar to clean the device.
Safety and maintenance instructions
• Make sure that all electrical connections, such as cable connections, comply with
to the relevant policies.
1
