Muratec Dynamo MFX-2530 Bedienungsanleitung
for MFX-2530
Quick
Reference
Fax
Sending a fax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 2
Broadcast. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4
Canceling commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
Copy
Basic copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8
Reduce/Enlarge copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10
Using the bypass tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
Duplex copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16
Just in case
Clearing document jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 18
Clearing printout jams. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22
Quick
Reference
Press
FAX
to change to Fax mode.
Set the document as follows:
When setting the document in the ADF When setting the document on the FBS
1. Set the document in the ADF face up.
2. Adjust the document guides.
1. Open the platen cover.
3. Close the platen cover.
2. Place the document on the FBS glass
face down and align it to the rear
left corner.
Note: The number of the pages you
can set in the ADF at one time
is 50 sheets.
Adjust the resolution and the contrast, if necessary.
Fax Sending a fax
2
Fax Ready
Nov 5 2001 13:30
Redial Group Broadcas
Fax Ready Memory 100%
Enter the fax number.
a. Enter the fax number using the numeric
keypad. d. Press
[Group]
and enter the group number
using the numeric keypad.
b. Press the one-touch key.*1
c. Press
SPEED DIAL/TEL INDEX
and enter
the speed-dial number using the numeric
keypad.
e. Press
SPEED DIAL/TEL INDEX
twice and
select the number you want using the
cursor key.
Press
START
.When you use the FBS, press [Exit] after
you have finished scanning all pages.
Note
When the machine cannot detect the document size,
select the scanning size using the cursor key, and then
press [Enter].
*1: When you press a one-touch key, you do not need
to press
START
in next step.
3
15
4-c,e
4-a
34-b
ScanSize
Usecursortoselect
scanningwidth.
11x17
Letter
Legal
Enter
Auto Letter
H.LTR
H.LTR
4-d
Press
FAX
to change to Fax mode.
Set the document. (See page 2.)
Adjust the resolution and the contrast, if necessary.
Press
[Broadcas]
.
Enter the fax number.
Fax Broadcast
You can use the numeric keypad, one-touch keys, speed-dial numbers, group numbers
and Tel index.
4
Group Clear Broadcas
Transmission
Enter fax number.
_
Note
To add additional fax numbers, repeat steps 3 and 4.
Press
START
.
If you want to erase the fax number you've already entered, select it using the cursor key
after pressing
[Broadcas]
. Then press
[Clear]
.
5
16
4
3
4 4
Press
JOB REVIEW & COMM. CANCEL.
If your machine is attempting to perform a command,
it will appear on the display. Skip to step 4.
Fax
Canceling commands
Select
"Reserved Transmission"
using the cursor key
and press
[Enter]
.
Select the command you want to cancel using the
cursor key.
6
Press
[Location]
to see the individual numbers within the broadcast in step 3.
To return to the previous display, press
[Location]
again.
Press
[Erase]
.
If you want to cancel another command, repeat steps 3–4.
To finish, press
RESET
.
Note
7
2, 3
1
2, 4
Press
COPY
to change to Copy mode.
Set the document as follows:
When setting the document in the ADF When setting the document on the FBS
1. Set the document in the ADF face up.
2. Adjust the document guides.
1. Open the platen cover.
3. Close the platen cover.
2. Place the document on the FBS glass
face down and align it to the rear
left corner.
Note: The number of the pages you
can set in the ADF at one time
is 50 sheets.
Adjust the document type and the contrast, if necessary.
Copy Basic copy
8
Copy Ready
Paper Zoom Sort
1
Set
100%
Press
START
.
Enter the number of copies using the numeric keypad.
Select the recording paper and set the advanced copy
features, if necessary.
Note
Any time you press
RESET
, the machine resets the display to the initial screen and
press
RESET
again to return the machine to its initial condition.
9
16
5
3
a. Auto Reduce / Enlarge
If you want enlarged copies, use the FBS glass.
Set the document. (See page 8.)
Press
REDUCE/ENLARGE
to select
"Auto"
.
Press
[Paper]
and select the paper size using the
cursor key.
Copy
Reduce/Enlarge copy
10
a
a
a
a
Andere Handbücher für Dynamo MFX-2530
3
Inhaltsverzeichnis
Andere Muratec Kopierer Handbücher
Muratec
Muratec MFX-C2280 Bedienungsanleitung
Muratec
Muratec MFX-C2280 Bedienungsanleitung
Muratec
Muratec MFX-C2280 Bedienungsanleitung
Muratec
Muratec MFX-C2828 Bedienungsanleitung
Muratec
Muratec MFX-3530 Bedienungsanleitung
Muratec
Muratec Dynamo MFX-2530 Bedienungsanleitung
Muratec
Muratec MFX-3510 Bedienungsanleitung
Muratec
Muratec MFX-3510 Service-Handbuch
Muratec
Muratec MFX-C2280 Bedienungsanleitung
Muratec
Muratec MFX-C2828 Bedienungsanleitung
Muratec
Muratec MFX-3530 Service-Handbuch
Muratec
Muratec MFX-3530 Bedienungsanleitung
Muratec
Muratec MFX-3530 Bedienungsanleitung
Muratec
Muratec MFX-C2828 Bedienungsanleitung
Muratec
Muratec MFX-1300 Bedienungsanleitung
Muratec
Muratec MFX-3510 Bedienungsanleitung
Muratec
Muratec MFX-C2700 Bedienungsanleitung
Muratec
Muratec MFX-C2280 Montage- und Wartungsanleitung
Muratec
Muratec MFX-C2828 Stücklistenhandbuch
Muratec
Muratec MFX-3590 Service-Handbuch
