Murphy PowerView PV-101 Bedienungsanleitung

Rev 09-10-08 00-02-0605

Catalog Section 78

PowerView™

Model PV-101

User’s Guide

In order to consistently bring you the highest quality, full

featured products, we reserve the right to change our

specifications and designs at any time. The latest version of

this manual can be found at www.fwmurphy.com.

Warranty - A limited warranty on materials and

workmanship is given with this FW Murphy product. A copy

of the warranty may be viewed or printed by going to

www.fwmurphy.com/support/warranty.htm

BEFORE BEGINNING INSTALLATION OF THIS

MURPHY PRODUCT:

•Disconnect all electrical power to the machine.

•Make sure the machine cannot operate during

installation.

•Follow all safety warnings of the machine

manufacturer.

•Read and follow all installation instructions.

Table of Contents

Introduction.............................................................................1

Engine and Transmission Parameters 2

Faceplate Features 3

Navigation and Keypad Functions 4

Operation.................................................................................9

PowerView Menus (First Time Start Up) 9

Setting Up the Display 12

Main Menu Options 18

Faults and Warnings 20

Utilities Menu 23

Modbus®Setup 25

Selecting Engine ECU 26

Troubleshooting...................................................................27

(THIS PAGE INTENTIONALLY LEFT BLANK)

00-02-0605 - 1 - Rev 09-10-08

Introduction

Congratulations on purchasing your PowerView display, a

multifunction tool that provides a window into the many

parameters and service codes of modern electronic engines

and transmissions.

This guide is intended to help you set up your PowerView

display and identify navigation basics and product features.

The display’s simple navigation and intuitive yet powerful

features allow you to master the product in no time.

Additional information can be found on our website at

www.fwmurphy.com/powerview.

00-02-0605 - 2 - Rev 09-10-08

Engine and Transmission Parameters

The following are some of the engine and transmission

parameters which may be displayed in standard or metric

units as well as in English, Spanish, French, Italian, or

German languages (when applicable, consult engine or

transmission manufacturer for SAE J1939 supported

parameters):

•Engine RPM

•Engine hours

•System voltage

•Percent engine load at the

current RPM

•Coolant temperature

•Oil pressure

•Fuel economy

•Throttle position

•Engine manifold air

temperature

•Current fuel consumption

•

Transmission oil

pressure

•Transmission oil

temperature

•Transmission gear

position

•Engine configuration

parameters

•Active fault codes

•Stored fault codes

00-02-0605 - 3 - Rev 09-10-08

Faceplate Features

00-02-0605 - 4 - Rev 09-10-08

Navigation and Keypad Functions

The keypad on the PowerView display is a capacitive touch

sensing system. There are no mechanical switches to wear

or stick. When a key is touched, feedback is provided by the

screen flashing. The keys on the keypad perform the

following functions:

Menu – Enter or exit menu screens.

Left Arrow – Scroll the screen or move the

parameter selection to the left or upward.

Right Arrow – Scroll the screen and move

the parameter selection to the right or

downward.

Enter Key – Select a menu or parameter or

hide/view an active fault code.

00-02-0605 - 5 - Rev 09-10-08

Basic Navigation

1. When Menu is pressed, the main menu items are

displayed.

00-02-0605 - 6 - Rev 09-10-08

2. Touching the Arrow Keys will move the selection bar to

other menu items.

Andere Handbücher für PowerView PV-101

Inhaltsverzeichnis

Andere Murphy Monitor Handbücher

Murphy

Murphy PowerView PV101-A-HAZ Bedienungsanleitung

Murphy

Murphy PowerView PV1200 Bedienungsanleitung

Murphy

Murphy PowerView PV1000 Bedienungsanleitung

Murphy

Murphy PowerView PV780B Bedienungsanleitung

Murphy

Murphy HelmView HV1000 Bedienungsanleitung

Murphy

Murphy PowerView PV-101-A Bedienungsanleitung

Murphy

Murphy HelmView HV1000 Bedienungsanleitung

Murphy

Murphy HelmView HV450 Bedienungsanleitung

Murphy

Murphy powerview pv350 r2 Bedienungsanleitung

Murphy

Murphy PowerView PV350 Bedienungsanleitung

Murphy

Murphy PowerView PV780 Bedienungsanleitung

Murphy

Murphy EMS447 Bedienungsanleitung

Murphy

Murphy PowerView PV1000 Bedienungsanleitung

Murphy

Murphy PowerView PV780 Bedienungsanleitung

Murphy

Murphy HelmView GPS Kit Betriebsanleitung

Murphy

Murphy PowerView PV-101-Cs Bedienungsanleitung

Murphy

Murphy PowerView PV750 Bedienungsanleitung

Murphy

Murphy HelmView GPS Kit Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung