Mutable Instruments Branches Bedienungsanleitung

Installation

Branches requires a -12V /

+12V power supply (2x5 pin

connector). The ribbon cable

connector must be aligned

so that the red stripe of the

ribbon cable (-12V) is on the

same side of the module’s

power header as the “Red

stripe” marking on the board.

The power consumption is:

+12V: 10 mA; -12V: 1 mA.

The trigger/gate signals

generated by Branches

have a +5V level.

Online manual and help

The full manual can be found

online at:

mutable-instruments.net/mod-

ules/branches/manual

For help and discussions, head to:

mutable-instruments.net/forum

Branches

Dual Bernoulli gate

Please refer to the online manual

for detailed information regarding

compliance with EMC directives

Branches consists of two

identical sections called

Bernoulli gates. An internal

connection routes the input of

section 1 to section 2 – unless

a jack is connected into the

input of section 2.

The Bernoulli gate

Upon receiving a trigger on

its IN input (1), the module

tosses a virtual coin: if the

outcome is heads, the trigger

is sent to output A (3); if the

outcome is tails, the trigger is

sent to output B (4).

The probability knob (A)

and the associated CV input

(2) change the odds of the

“heads” and “tails” outcomes.

A

B

12

3 4

In extreme settings, the out-

come is no longer random –

causing the module to behave

like a voltage-controlled

switch.

Toggle mode

In toggle mode, the module

associates the “heads” and

“tails” outcomes to a different

pair of decisions: “continue

sending the trigger to the

same output as before” and

“send the trigger to the oppo-

site output”.

Press the switch (B) to enable

or disable the toggle mode.

Latch mode

When the latch mode is

enabled, an output (3) or (4)

stays at +5V until the other

output gets activated.

Hold the switch (B) for more

than 1s to enable or disable

the latch mode.

Toggle and Latch settings are

kept in memory even if the

module is powered off.

Andere Mutable Instruments Aufnahmegeräte Handbücher

Mutable Instruments

Mutable Instruments Rings Bedienungsanleitung

Mutable Instruments

Mutable Instruments Links Bedienungsanleitung

Mutable Instruments

Mutable Instruments Plaits Bedienungsanleitung

Mutable Instruments

Mutable Instruments Branches Bedienungsanleitung

Mutable Instruments

Mutable Instruments Rings Bedienungsanleitung

Mutable Instruments

Mutable Instruments GRIDS Bedienungsanleitung

Mutable Instruments

Mutable Instruments Blinds Bedienungsanleitung

Beliebte Aufnahmegeräte Handbücher anderer Marken

KV2 Audio

KV2 Audio 500 Series Bedienungsanleitung

Robotics Technologies

Robotics Technologies microBus-Cam II Bedienungsanleitung

Seca

Seca 460 Bedienungsanleitung

Cognex

Cognex MVS-8000 Series Bedienungsanleitung

Mect

Mect MPNC006 Series Bedienungsanleitung

Bad Caf

Bad Caf THE LEASH Bedienungsanleitung

Strymon

Strymon NIGHTSKY Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Bedienungsanleitung

Tews Technologies

Tews Technologies TPMC465 Bedienungsanleitung

Honeywell

Honeywell Excel 50 Bedienungsanleitung

SeaLevel

SeaLevel COMM+8.LPCI Bedienungsanleitung

Arturia

Arturia AUDIOFUSE STUDIO Bedienungsanleitung

Rukra

Rukra RK-1240 Bedienungsanleitung

Samson

Samson SCOM Bedienungsanleitung

Dynacord

Dynacord DPS260 Bedienungsanleitung

Nice

Nice Core Bedienungsanleitung

Pyle Pro

Pyle Pro PSS8 Bedienungsanleitung

RF-System

RF-System TinyGate Gebrauchs- und Pflegehandbuch