Mutable Instruments Veils Bedienungsanleitung

About Veils

VCAs are the cornerstones of modular patches: shaping

the amplitude of a sound with an envelope, animating a

mixture of several oscillators, adjusting the amount of

ﬁlter modulation with a random source or touch plates,

controlling the amount of FM applied on an oscillator...

are all possible uses of these super versatile building

blocks.

Veils provides four VCAs with an adjustable response

curve and an offset control. Their outputs are dai-

sy-chained, allowing adjacent groups of 2, 3, or all 4

channels, to be mixed together.

Veils requires a -12V / +12V power supply (2x5 pin

connector). The red stripe of the ribbon cable (-12V side)

must be oriented on the same side as the “Red stripe”

marking on the board. The module draws 50mA from the

-12V rail and 50mA from the +12V rail. Current con-

sumption can reach 70mA on either rail depending on

the color and brightness of the LEDs.

Online manual and help

The full manual can be found online at

mutable-instruments.net/modules/veils/manual

For help and discussions, head to

mutable-instruments.net/forum

Veils

Quad VCA

Please refer to the online manual for detailed infor-

mation regarding compliance with EMC directives

A. Response curve, continuously variable between

exponential and linear. Very high gains (up to +30dB) can

be achieved with an exponential response curve. Beware

of clipping!

B. Offset control. This control adds a positive offset to

the CV signal, for example to obtain a unipolar modula-

tion from a bipolar LFO.

C. Gain CV amount. Amount of gain (amplitude) modu-

lation from the CV input (2), or direct gain control when

no cable is patched into the CV input. When set to the

maximum, a CV of +5V yields a gain of 1, and a CV above

+5V might cause distortion.

1. Gain indicator LED. Its brightness is proportional to

the VCA gain, on a dB scale. The LED is off when the

signal is muted.

2. Gain CV input. Normalized to a constant +8V.

3. DC-coupled signal input. Accepts audio or CV signals.

4. Output indicator LED. Its brightness represents signal

level, and its color represents signal polarity (green =

positive).

5. Signal output. When no patch cable is plugged into an

output, the signal from this channel is routed to the next

channel. For example, when no patch cable is patched

into output 1, output 2 will contain the sum of channel 2

and channel 1. If nothing is patched into outputs 1, 2 and

3, output 4 will contain the sum of all four channels.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Mutable Instruments Synthesizer Handbücher

Mutable Instruments

Mutable Instruments Anushri Bedienungsanleitung

Mutable Instruments

Mutable Instruments ambika Bedienungsanleitung

Mutable Instruments

Mutable Instruments Blinds Bedienungsanleitung

Mutable Instruments

Mutable Instruments Clouds Bedienungsanleitung

Mutable Instruments

Mutable Instruments Beads Bedienungsanleitung

Mutable Instruments

Mutable Instruments Clouds Bedienungsanleitung

Mutable Instruments

Mutable Instruments ambika Bedienungsanleitung

Mutable Instruments

Mutable Instruments ambika Bedienungsanleitung

Mutable Instruments

Mutable Instruments Anushri Bedienungsanleitung

Mutable Instruments

Mutable Instruments Blades Bedienungsanleitung

Mutable Instruments

Mutable Instruments Clouds Bedienungsanleitung

Mutable Instruments

Mutable Instruments Elements Bedienungsanleitung

Beliebte Synthesizer Handbücher anderer Marken

Kawai

Kawai MP7 Technisches Handbuch

Joranalogue

Joranalogue Contour 1 Bedienungsanleitung

Full Bucket Music

Full Bucket Music Mono/Fury Bedienungsanleitung

Kawai

Kawai PH50 Bedienungsanleitung

IK Multimedia

IK Multimedia UNO Synth PRO X Bedienungsanleitung

Behringer

Behringer DEEPMIND 12 Bedienungsanleitung

Roland

Roland Gaia SH-01 Bedienungsanleitung

Roland

Roland GR-30 Bedienungsanleitung

Gotharman

Gotharman Gotharman's anAmoNo-box Bedienungsanleitung

Yamaha

Yamaha DX21 Bedienungsanleitung

QuStream

QuStream HDFS-550 Bedienungsanleitung

Modal Electronics

Modal Electronics ARGON8 Bedienungsanleitung

Roland

Roland GS-500 Bedienungsanleitung

Octave

Octave Cat SRM Bedienungsanleitung

Dreadbox

Dreadbox Murmux Initiate Bedienungsanleitung

neutral labs

neutral labs ELMYRA 2 Bedienungsanleitung

Waldorf

Waldorf KYRA Bedienungsanleitung

Tubbutec

Tubbutec Juno-66 Bedienungsanleitung