MuxLab 500441 Bedienungsanleitung

HDMI 8x8 Matrix Switch UHD-4K

Installation Guide

500441

HDMI 8x8 Matrix Switch, UHD-4K Installation Guide

SAFETY PRECAUTIONS

To insure the best performance from the product, please read all

instructions carefully before using the device. Save this manual for

future reference.

Follow basic safety precautions to reduce the risk of fire, electrical

shock and injury.

Do not dismantle the housing or modify the module. It may result in

electrical shock or burn.

Do not open or remove the housing of the device as you may be

exposed to dangerous voltage or other hazards.

To prevent fire or shock hazard, do not expose the unit to rain,

moisture and do not install this product near water. Keep the

product away from liquids.

Spillage into the housing may result in fire, electrical shock, or

equipment damage. If an object or liquid falls or spills on to the

housing, unplug the module immediately.

Do not use liquid or aerosol cleaners to clean this unit. Always

unplug the power to the device before cleaning.

Using supplies or parts not meeting the products’ specifications

may cause damage, deterioration or malfunction.

Refer all servicing to qualified service personnel.

Install the device in a place with adequate ventilation to avoid

damage caused by overheat.

Unplug the power when left unused for a long period of time.

Information on disposal of devices: do not burn or mix with general

household waste, please treat them as normal electrical waste.

NOTICE: Please read this manual carefully before using this product.

HDMI 8x8 Matrix Switch, UHD-4K Installation Guide

Table of Contents

1.Introduction......................................................................................... 2

2. Features .............................................................................................. 3

3. Package Contents................................................................................ 3

4. Specifications...................................................................................... 4

5. PANEL Description .............................................................................. 5

5.1 Front Panel................................................................................. 5

5.2 Rear Panel.................................................................................. 9

6. Remote Control................................................................................. 12

8. Operate and Connect........................................................................ 13

Regulatory Compliance......................................................................... 15

1.Introduction

The HDMI 8x8 Matrix, UHD-4K connects eight HDMI sources to eight

displays. This matrix provide eight HDMI outputs and each HDMI

output is supporting 1080p Full HD up to 4K plus all 3D formats and

supporting independent EDID control. It works with Blu-Ray players,

Set-Top boxes, Home Theater PCs, and game consoles that connect to

an HDMI display. Any source is accessible at all times by any display by

selecting it via the supplied IR Remote Control, RS-232, TCP/IP or by

using the selection buttons on the front panel.

HDMI 8x8 Matrix Switch, UHD-4K Installation Guide

2. Features

HDMI V1.4 supports: 4K x 2K @30Hz, 1080P @120Hz, and

1080P 3D @60Hz.

Deep Color support 48/36/30/24-bit.

Supports LPCM 7.1CH, Dolby True HD, Dolby Digital Plus and

DTS-HD Master Audio transmission.

Allows any source to be displayed on multiple displays at the

same time.

Allows any HDMI display to view any HDMI source at any

time.

8-input ports support independent EDID.

Supports IR matrix and Digital Audio output.

Supports RS-232, remote control, on-panel control and TCP/IP

Control.

Front-panel LCD display for status feedback.

HDMI connectors with Locking nuts

3. Package Contents

One (1) HDMI 8x8 Matrix Switch, UHD-4K

One (1) 12V/2.5A DC power adapter

One (1)Installation Guide

One (1) HDMI Matrix IR Remote

Two (2) Mounting ears

One (1) RS232 serial cable

Eight (8) Wideband IR Tx cable

Nine (9) Wideband IR Rx cable

Notes：Please confirm if the product and the accessories are all

included. If not, please contact the location at which you purchased

the unit.

HDMI 8x8 Matrix Switch, UHD-4K Installation Guide

4. Specifications

Video Bandwidth

297 MHz

Support Video Resolution

480i,576i,480p,576p,720p,1080i,1080p@

24/30/50/60Hz, 4K@30Hz, 1080P3D@60Hz

Input Ports

Eight (8) HDMI Receptacle

One (1) RS-232

One (1) Ethernet Port (Control)

Nine (9) IR Sensor 3.5mm Jack

Output Ports

Eight (8) HDMI Receptacle

Eight (8) Digital Audio Output

Eight (8) IR Emitter 3.5mm Jack

ESD Protection

Human-body Model:

±8kV (Air-gap discharge)

±4kV (Contact discharge)

Power Supply

One (1) 110-240V/12VDC/2.5A power

supply with interchangeable blades

Dimensions

17.32”x7.87”x1.77” (440 × 200 × 45 mm)

Weight

5.10lb (2310 g)

Chassis Material

Metal

Silkscreen Color

Black

Operating Temperature

0 ºC to 40 ºC / 32 ºF to 104 ºF

Storage Temperature

−20 ºC to 60 ºC / −4 ºF to 140 ºF

Relative Humidity

20 to 90 % RH (non-condensing)

Power Consumption

23 W(max) / 0.5w(Standby)

Compliance

Regulatory: FCC, CE, RoHS

Warranty

2 Years

Ordering Information

500441 HDMI 8x8 Matrix Switch, UHD-4K

HDMI 8x8 Matrix Switch, UHD-4K Installation Guide

5. Panels Description

5.1 Front Panel

No.

Name

Description

LCD

Show the status of input-output selection, EDID info

and more.

IR sensor for the remote control of the 8x8.

Power

Press this button to power the device on/off. The LED

will illuminate green when the power is on, red when

it is in 'Standby' mode.

Lock

Press this button to lock all the buttons on the panel,

press again to unlock. The orange LED will illuminate

when the button is locked and off unlock.

HDMI

Output

HDMI output selection button 1 to 8：Press to select

the output from 1 to 8. ALL button for HDMI

outputs：Press to select all of the outputs from 1 to 8.

HDMI

Input

HDMI input selection button 1 to 8：Press to select the

input from 1 to 8.

HDMI 8x8 Matrix Switch, UHD-4K Installation Guide

No.

Name

Description

Preset

Press to recall the last save present configuration.

To save the current configuration press the preset

button for at least 3 seconds.

EDID

Menu button：Press to enter EDID set mode.

Enter button：Press to confirm and save the setting.

UP button：Press to change segment's value.

Down button：Press to change segment's value.

EDID mode table

1. #1 submenu：EDID mode table

Number

EDID Description

1080i, 2CH AUDIO

1080i, DOLBY/DTS 5.1

1080i, HD AUDIO

1080p, 2CH AUDIO

1080p, DOLBY/DTS 5.1

1080p, HD AUDIO

3D,1080p, 2CH AUDIO

3D, 1080p,DOLBY/DTS 5.1

3D,1080p, HD AUDIO

4k*2k, 2CH AUDIO

4k*2k, DOLBY/DTS 5.1

4k*2k, HD AUDIO

DVI 1024x768

DVI 1920X1080

DVI 1920X1200

Copy from HDMI Output 1

Copy from HDMI Output 2

Copy from HDMI Output 3

Copy from HDMI Output 4

Copy from HDMI Output 5

Copy from HDMI Output 6

HDMI 8x8 Matrix Switch, UHD-4K Installation Guide

Number

EDID Description

Copy from HDMI Output 7

Copy from HDMI Output 8

2. #2 submenu：Input ports selection

Number

Input port Description

Input 1

Input 2

Input 3

Input 4

Input 5

Input 6

Input 7

Input 8

Input ALL

EDID. What is it and what is it used for?

Under normal circumstances, the source device will require

information about a connected device/display to assess what

resolutions and features are available. The source can then configure

its output to send only resolutions and features that are compatible

with the attached device/display. This information is called EDID

(Extended Display Information Data)

Also, a source device can only accept and read one EDID from a

connected device/display. Likewise, the source can only output one

resolution for use by a connected device/display.

Why is EDID so important with the HDMI Matrix?

The Matrix is a complex piece of technology that replicates and

switches between multiple inputs and outputs. Each connected source

device will require one EDID to read. EDID management is carefully

handled by the HDMI Matrix to provide a single EDID for each source

to read.

HDMI 8x8 Matrix Switch, UHD-4K Installation Guide

What options do I have to manage the EDID in the HDMI Matrix?

First, it is important to note that each source device can only output

one video/audio signal type. This includes resolutions and timings.

When multiple devices/displays are used, such as with the HDMI

Matrix, it is important to use devices/displays that have similar or

compatible resolutions/features. This will ensure that the single

video/audio signal produced by the source device is accepted by all of

the connected output devices/displays. The user has the option,

through the EDID management window, to choose how the unit will

manage the EDID from multiple HDMI devices/displays. Therefore the

user has some control over the resolutions/features that the source

devices will output. The HDMI Matrix has multiple EDID management

modes that will control how the EDID information from multiple

devices/displays are combined, ignored, and routed.

How to operate the HDMI Matrix?

1. How to select Output and Input Port?

Q. OUTPUT-X select INPUT-Y:

A. Press OUTPUT-X (X means 1 to 8 of outputs, including ALL)

Press INPUT-Y (Y means 1 to 8 of inputs)

2. How to change INPUT-Y EDID

Q. Fixed EDID to INPUT-Y/ALL:

A. Press MENU button to enter EDID set mode.

Press UP/DOWN button to select the EDID you want.

Press ENTER button ensure and enter Input port submenu.

Press UP/DOWN button to select Input port you want.

Press ENTER button ensure and save the setting.

HDMI 8x8 Matrix Switch, UHD-4K Installation Guide

5.2 Rear Panel

No.

Name

Description

Control

Show the status of input-output selection, EDID info

and so on.

Ethernet: This port is the link for TCP/IP controls.

Connect to an active Ethernet link with an RJ45

terminated cable.

RS232: Connect to a PC or control system with

D-Sub 9-pin cable for the transmission of RS-232

commands.

Power

Jack

Use included DC adaptor to power the HDMI matrix

switch.

IR Ext.

This port is local IR sensor for extending the IR

signal. Connect with an IR Sensor.

Sensors

These ports are IR Matrix input ports. Connect with

IR Sensors.

Emitter

These ports are IR Matrix output ports. Connect

with IR Emitters.

Digital

Audio

Audio output area, each port is linked to its HDMI

output port. For example: the audio signal of Digital

Inhaltsverzeichnis

Andere MuxLab Schalten Handbücher

MuxLab

MuxLab 500771 Bedienungsanleitung

MuxLab

MuxLab MXHM44 Bedienungsanleitung

MuxLab

MuxLab 100510 Bedienungsanleitung

MuxLab

MuxLab 500533 Bedienungsanleitung

MuxLab

MuxLab VideoEase LongReach 16 Bedienungsanleitung

MuxLab

MuxLab LongReach 16 500120 Benutzerhandbuch

MuxLab

MuxLab 500430 Bedienungsanleitung

MuxLab

MuxLab 500435 Bedienungsanleitung

MuxLab

MuxLab 500437 Bedienungsanleitung

MuxLab

MuxLab 500762-TX Bedienungsanleitung

MuxLab

MuxLab 500133 Bedienungsanleitung

MuxLab

MuxLab VideoEase 500300 Bedienungsanleitung

MuxLab

MuxLab LongReach II 500126 Bedienungsanleitung

MuxLab

MuxLab Profidigital 500445 Bedienungsanleitung

MuxLab

MuxLab VideoEase 500410 Bedienungsanleitung

MuxLab

MuxLab 500437 Bedienungsanleitung

MuxLab

MuxLab 500440 Bedienungsanleitung

MuxLab

MuxLab VideoEase CATV 500300 Bedienungsanleitung

MuxLab

MuxLab 500136-US Bedienungsanleitung

MuxLab

MuxLab 500160 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch