MyBinding CubeX Trio Bedienungsanleitung

CubeX Trio 3D Printer

Instruction Manual

CubeX 3D Printer

User Guide

See inside for use and safety information.

CubeX User Guide version 1

TABLE OF CONTENTS

Warranty ...........................................................................................3

Limitation of liability ..................................................................................3

IMPORTANT SAFETY INFORMATION

Safety symbols and denitions..........................................................................4

Safety guidelines ....................................................................................4

CUBEX 3D PRINTER FEATURES AND BENEFITS

CubeX 3D printer features and properties .................................................................5

Print materials.......................................................................................5

Material color choices.................................................................................5

How the CubeX works ................................................................................6

At a glance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Requirements for your CubeX ..........................................................................7

Material storage .....................................................................................7

What’s included .....................................................................................7

SETTING UP THE CUBEX

Unpacking your CubeX (follow unpacking guide)............................................................8

Checking the XYZ axis ................................................................................9

Navigating the CubeX main menu .......................................................................9

Installing the Print Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Loading material cartridge ............................................................................10

Removing the material cartridge........................................................................10

Fitting the new cartridge ..............................................................................10

INSTALLING YOUR CUBIFY INVENT SOFTWARE ........................................................11

GETTING STARTED

CubeX main menu overview...........................................................................12

CUBEX SOFTWARE

Overview of the CubeX software .......................................................................13

Opening the CubeX software for the rst time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

CubeX software user interface ......................................................................14-15

How to open a single part.............................................................................16

How to open multiple parts............................................................................16

Positioning multiple parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Opening multi-material parts ..........................................................................17

Using the shell selector tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Rotating a part .....................................................................................17

Scaling a part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Using the CubeX software to build a .cubex le............................................................18

Saving a .cubex le for printing ........................................................................18

PRINTING YOUR FIRST CREATION ...................................................................19

FINISHING YOUR CREATION

Removing your creation from the Print Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Removing rafts .....................................................................................20

Removing supports with wire cutters ....................................................................20

Removing supports with the Ultrasonic Support Removal Tank................................................21

Hot water method ...................................................................................21

Caustic soda method ................................................................................22

CUBEX MAINTENANCE

Restoring roughness to the Print Pad....................................................................23

Leveling the Print Pad ...............................................................................23

Leveling the aluminum pad support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Fine-tuning your Print Pad ............................................................................24

Setting the print jet gap...............................................................................24

Unblocking the CubeX print tip.........................................................................24

Unblocking the CubeX print jet.........................................................................25

Updating CubeX rmware ............................................................................25

How to contact Cubify support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Setting up the CubeX print jet offsets.................................................................26-27

copyrighted and contains proprietary information that is the property of 3D Systems, Inc. The user does not have the right

to copy, reproduce, or translate this document in any way or to any media without the prior written consent of 3D Systems,

Inc. No copies of the docu¬ment may be sold or given to any person or other entity. Cubify, Cube, and the 3DS logo are

registered trademarks of 3D Sys¬tems, Inc. Use of the Cubify.com website constitutes acceptance of its Terms of Service

and Privacy Policy.

WARRANTY

3D Systems warrants that the CubeX 3D Printer will be free from defects in materials and workmanship, during the

applicable war¬ranty period, when used under the normal conditions described in the documentation provided to you,

including this User Guide. 3D Systems will promptly repair or replace the CubeX 3D Printer, if required, to make it free of

defects during the warranty pe¬riod. This warranty excludes (i) normal consumable or expendable parts (such as material

cartridges), (ii) repairs required during the warranty period because of abnormal use or conditions (such as riots, oods,

misuse, neglect or improper service by anyone except 3D Systems or its authorized service provider), and (iii) repairs

required during the warranty period because of the use of non-integrated, non-approved or non-licensed materials with the

CubeX 3D Printer. The warranty period for the CubeX 3D Printer is ninety (90) days and shall start the date your CubeX 3D

printer is activated or twenty four (24) months after the CubeX 3D Printer is shipped from 3D Systems to the end customer

or intermediary. For consumers who are covered by consumer protection laws or regulations in their country of purchase

or, if different, their country of residence, the benets conferred by our ninety (90) day warranty are in addition to, or operate

concurrently with, all rights and remedies conveyed by such consumer protection laws and regulations, including but not

limited to these additional rights.

THIS WARRANTY IS THE ONLY WARRANTY PROVIDED FOR THE CUBEX 3D PRINTER. TO THE MAXIMUM EXTENT

PERMIT¬TED BY LAW, 3D SYSTEMS EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES FOR THE CUBEX 3D

PRINTER AND EACH OF ITS COMPONENTS, WHETHER THOSE WARRANTIES ARE EXPRESS, IMPLIED OR

STATUTORY, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR INTENDED OR PARTICULAR

PURPOSES.

LIMITATION OF LIABILITY

3D SYSTEMS WILL NOT BE RESPONSIBLE FOR CONSEQUENTIAL, EXEMPLARY OR INCIDENTAL DAMAGES (SUCH

AS LOSS OF PROFIT OR EMPLOYEE’S TIME) REGARDLESS OF THE REASON. IN NO EVENT SHALL THE LIABILITY

AND/OR OBLIGATIONS OF 3D SYSTEMS ARISING OUT OF THE PURCHASE, LEASE, LICENSE AND/OR USE OF THE

EQUIPMENT BY YOU OR OTHERS EXCEED THE PURCHASE PRICE OF THE CUBEX 3D PRINTER.

SAFETY SYMBOLS AND DEFINITIONS

SAFETY GUIDELINES

• To ensure personal safety, please follow all general safety guidelines, cautions and warnings when operating your CubeX.

• Do not make modications to the CubeX or safety features of the CubeX. Doing so is strictly prohibited and voids your warranty.

• Use of 3D print materials or parts other than genuine 3D Systems® components may void your warranty.

• Adult supervision is required; watch children closely and intervene as necessary to ensure appropriate use of the CubeX and

prevent potential safety hazards. Ensure that small 3D prints are not accessible to young children, as they may pose choking

hazards.

• The print tip of the print jet becomes very hot when the CubeX is operating; avoid touching this area until it has cooled down.

• Do not change material color during printing; doing so may damage your CubeX.

The Hot Surface Hazard symbol indicates that a hot surface may be accessible in the vicinity of this sign or at the

build pad and print jet. Avoid contact; hot surfaces can cause severe burns.

The Caution symbol indicates the possibility that something may happen which could cause loss of data, damage

to equipment, or personal injury.

IMPORTANT SAFETY INFORMATION

The print tip heats the material to extrude a thin string of plastic which adheres to the print pad in layers. The print pad

lowers after each layer so that each one builds upon the last. This process continues through the nal layer, until your

creation is complete.

CUBEX 3D PRINTER FEATURES AND PROPERTIES

• Plastic Jet Printing technology

• Houses up to three print jets for multi-color and multi-material prints

• Over material choices.

• Choice between ABS and PLA plastic, both recyclable

• Prints objects up to 275 x 265 x 240 mm (10.75”x10.5”x9.5”)

• EZ load print cartridge

• Fully automated supports: peel off supports for ABS and PLA; PLA supports can also be removed using the Ultrasonic

Support Removal Tank available at Cubify.com/cubex/store_parts

PRINT MATERIALS

The CubeX can use two different types of print materials: PLA and ABS. Each material has unique benets and you can

guide your selection based on the properties your part requires.

PLA

This is a hard plastic that has a low environmental impact. It is derived from renewable, starch-based resources.

We recommend using PLA when printing extra-large parts on CubeX as it is a more stable print material

PLA is the optimal support material for industrial ABS parts. PLA has the ability to dissolve away in caustic soda solutions

supported by an ultra-sonic tank. (see page 36 for more information)

ABS

This is a well-known plastic known for its strength and industrial properties.

As a build material, ABS is good for both small and large parts.

ABS works as an excellent support material for extra-large PLA parts.

MATERIAL COLOR CHOICES

CUBEX 3D PRINTER FEATURES AND BENEFITS

Glow-in-the-

dark Neon

Green

* Natural is only available in PLA plastic, not ABS.

Neon Orange

Glow-in-the-

dark Neon

Blue

Tan

White

Yellow

Black

Neon Green

Silver

Green

Industrial Grey

Blue

Natural*

Teal

Magenta

Purple

Red

Brown

HOW THE CUBEX WORKS

The CubeX uses your 3D model to create a 3D printed part.

• To begin the process, design a part in a CAD package or download one from Cubify.com.

• Before the part can be printed, it must be opened into the CubeX Software (CubeX Software accepts both .stl and

.creation  les).

• The CubeX Software creates a .cubex  le, which the CubeX uses to build the part.

• Save the .cubex  le onto your USB drive and plug the drive into your CubeX.

• The CubeX creates the model by pulling  lament from the cartridge through the print jets via the delivery tubes. The

 lament is then jetted through the print tip in a thin string of molten plastic. The print jet is accommodated by the print

plate, which lowers incrementally after each layer is deposited so a new layer can be drawn on top of the last, building the

part up.

AT A GLANCE

Touchscreen

Function button

Memory stick USB port and PC connection USB port

Power supply

Cartridge dock 1

Cartridge dock 2

Cartridge dock 3

CGFE

Front

Bottom

Inside

REQUIREMENTS FOR YOUR CUBEX

PC requirements:

• Microsoft® Windows® 7

• Microsoft® Windows® XP (SP3 or higher)

• Microsoft® Windows® 8

Software:

• CubeX Client Software, available for download at Cubify.com

Electrical requirements:

• 110-240v AC

MATERIAL STORAGE

Although all polymers degrade with time, the following condi¬tions help ensure that the material remains of high quality:

• Unpack material only as needed

• Store material at 10-30°C

• Use within 12 months of receipt

WHAT’S INCLUDED

UNPACKING YOUR CUBEX (FOLLOW UNPACKING GUIDE)

1. Open the box and take out the top lid of the CubeX, it’s between two layers of foam.

2. With two people take CubeX out of the box, lift from the metal frame on both sides of the machine. Place CubeX on a

table.

3. Remove toolkit, power cord, Cube- Stick and Jet Wipe from bottom of the box.

4. Using the nippers supplied in toolkit cut the strap and take out the material boxes.

5. Cut away all yellow zip ties holding the Print Jet in place for transport.

6. Cut away all yellow zip ties holding the foam parts in place.

7. Take out all foam ttings.

8. Remove plexiglass Z-Axis guard, by unbolting the 4 screws holding it in place.

9. Take out the plexiglass part.

10. Plugging in the CubeX:

• To power on plug the power lead into the power supply located on the base of the machine.

• The LED on the control panel should light up indicating your machine has power

• Press the function button on the control panel to turn on CubeX

11. Press the cross to power on your CubeX.

12. Activating your CubeX at Cubify.com:

Log into your Cubify.com account. If you do not have a Cubify.com account, you will need to create one.

• Click on Activate my CubeX from the 3D Printers drop down menu in the toolbar.

• Enter your serial number in the designated eld. Serial Numbers can be found in two places:

• Interior back wall of your CubeX printer

• Exterior of the CubeX box.

• Enter your CubeX ID in the designated eld.

• Cubify.com will display you four digit activation code in a pop-up window

• Enter the Activation ID into your CubeX using the numbers on your touchscreen.

• Make a note of your activation code as this may be required in the future.

13. Using the touch screen navigate to the move function.

14. Using the up arrow move the print bed up far enough to take out the foam.

15. Take out the last foam piece underneath the build plate.

16. Move the print pad down all the way down so you can install the Jet Wiper.

17. Install the Jet Wiper. Make sure the white plastic part is facing the front.

SETTING UP THE CUBEX

Inhaltsverzeichnis

Andere MyBinding 3D-Drucker Handbücher

MyBinding

MyBinding CubeX Duo Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch