Mychway HR-BX001 Bedienungsanleitung

- 1 -

—Please read the instructions before use！

USER MANUAL

- 2 -

Ⅰ.Brief Introduction

E-light applies three core technology, IPL, RF, and epidermis cooling. It

combines the advantage of IPL and RF, in one hand, the skin absorbs IPL energy

selectively, and the skin also absorbs RF energy, on the other hand, the

RF-surface-touch cooling technology removing the discomfort and complications by

high heat of IPL. Therefore, the effect and safety of E-light makes a breakthrough.

1. Principle

Applying the technique of IPL and Bi-polar Radio Frequency, the equipment

acts on the entire skin corium and connective tissue, stimulates the collagens of

different depth to realign and grow, then gets treatment effect. Bio-polar RF release

energy at the same time, with the selective absorption for the skin to light energy,

various pathological tissues of corium and epidermis creates Photothermolysis effect.

Since light energy is far below conventional IPL, the pigment tissue and vascular

pathological tissue of the corium and epidermis would absorb more energy without

injuring the epidermis, and then remove these pathological tissues better and get

the effect.

2. Application：

1. Hair removal (including dark skin);

2. Skin rejuvenation

3. Acne treatment;

4. Removing freckle, age spots, sun spots, pigmentation troubles, etc;

5. Removing red face, red capillary, and bottle nose.

3. System Self-checking

The circuit of system entering the self-checking situation when the machine

starts, leave the machine carry on the self-checking for 5-10 seconds, then continue

the operation.

4. System Classification

Electric shock protection：Grade1

BF Grade

- 3 -

Corrosion prevention liquid：ordinary

Do not use the machine in the environment mixed of flammable narcotic and air or

nitrogen oxide mixture.

5. Equipment Consist, Specification, & Accessory List

1. Equipment Consist:

1.1. Mainframe

A. Power supply system

B. Microcomputer system

C. Monitor

D. Cooling System

1.2. E-light Handpiece

A. Intense pulsed light source, xenon lamp

B. Reflector and filter

C. Sapphire wave guide

2. Technique Specification

●IPL Power: 800W

●RF Intense Electric Energy: 5MHz

●Light Energy: 1-50J/cm2

●Pulse Amount: 1-6

●Pulse Width: 1-10 ms

●Pulse Delay: 1-100 ms

●Repeat frequency: 1-4s

●RF working time: 50-2500 ms

●Spot size: 8x40mm

●N.W.: 35kg

●Voltage: 110V~220V±10%, 50~60Hz

- 4 -

3. Equipment Structure

- 5 -

4. Accessory List

No.

Item

Unit

Qty

Remark

Main frame

set

in the main case

E-light Handpiece

in the lateral foam box

RF Handpiece

in the lateral foam box

Filters

5x2

in the filter box

Power Lead

in the lateral foam box

Key Switch

in the filter box

Goggles for Operator

pair

in the lateral foam box

Goggles for Patient

pair

in the lateral foam box

Spare Plugs & fuses

in the lateral foam box

Water funnel

in the lateral foam box

User Manual

in the lateral foam box

Ⅱ.Standard Treatment Process

2.1 Form filling

Fill in the blanks of the Client File, confirm the treatment program, and remind

the client pay attention to some points before and after treatment.

2.2 Face cleaning

Clean the face with gentle face cream for 3 minutes.

Remind: clean the hands of operator and the handpiece with

bromogeramine.

2.3 Preheating

Start the equipment after face cleaning; preheat for not less than 3

minutes (without lighting the xenon lamp).

2.4 Shaving

Shave the unwanted hair of the treatment area(2 minutes).

2.5 Gel coating

Coating the gel evenly (2-3mm) on the skin.

Effect：light guide, cooling, anaesthetisin.

Attention: no coating on eyes, eyebrows, lips.

2.6 Eye protection

Operator: wear the safety goggles.

Patient: close the eyes, wear professional safety goggles or cover the eyes with

eye patch.

2.7 Allergic test

- 6 -

Emit 2 or 3 light spots in the bottom of ears in safe parameter, observe for 3

minutes.

Effect: do not continue to operate if there is an allergic phenomenon.

2.8 Operation

Carry on the operation with a suitable parameter to the patient.

ATTENTION:

2.8.1 Inform the patient that there will be a slight pricking in operation before

operating, to avoid panic.

2.8.2 Start the operation with a low energy grade; adjust the parameters in operating

while asking the feeling of the patient.

2.8.3 Move the light spot by one spot overlapping the upper 1/3 part of the previous

spot.

No emitting one area repeatedly, otherwise may cause inflaming or burns.

2.8.4 The handpiece should touch the skin vertically, no over pressing or leaving the

skin.

2.8.5 Observing the reaction of skin while operating.

2.9 Cold compress

Keep gel coating for 20 minutes after operation ending; carry out cold compress

in obvious slight reddish reaction till reddish fading away.

2.10 Cleaning

Clean the gel with cold water, coat corresponding cosmetics.

2.11 Treatment Course

Skin Rejuvenation Program: 30-45 days/time (4 times/course)

Hair Removal Program: 2-3months/time (3times/course)

2.12 Special reminding

2.12.1 Ask the client before treatment: is there a allergic or not; is there a bad

reaction before for similar operation; fill the Client File concretely. Adjust the

parameters on the basis of full acquaintance concretely. Adjust the parameters on

the basis of full acquaintance of the condition of patient. Inform the patient the

possible reaction in operation before operating.

2.12.2 In large area treatment or long time continuous operating, the water inside

the equipment will warm up and the handpiece will be hot, interrupt the operation

to refresh the water or leave the water cool down to continue operating.

- 7 -

2.12.3 Refresh the circulating water in one month; use purified water or medical

distilled water.

Ⅲ.Operation Instruction

3.1 Before starting the machine

3.1 Accessories connecting：

3.1.1 Connect the handle and filters:

3.1.1.1. Put the E-light handle on the hanger

3.1.1.2. Connect the E-light handle to the connecting port on the back board of the

machine tightly.

3.1.2 Check the water holes of the backboard, make sure the water outlet hole is

plugged well.

3.2 Water infusing:

3.2.1 Connect the funnel with the affussion and open the overflow hole

3.2.2 infuse water till water spill out from the overflow hole continously

3.2.3 Take out the funnerl and take back the cap of the overflow hole .

3.3 Checking

3.3.1 Make sure there is no water leaking;

3.3.2 Make sure there is no moisture or wet for electricity connecting parts;

3.3.3 Make sure the key switch is in the off position;

3.3.4 Make sure the emergency stop switch is in the on position.

3.4 Starting the equipment

3.4.1 Connect the power cord, turn on the key switch;

3.4.2 Double confirm there is no leaking of water circulation, fold the protective

cover by turning it right.

3.5. Debugging

3.5.1. Make sure water and electric circuit is correct connected; then turn on

the power to start the machine.

3.5.2. Turn on the master power switch on the backboard;

3.5.3.Turn on the emergency switch (clockwise turn) in the front side of the

mainframe

3.6. Operation

Enter operation condition after debugging and no abnormalities found.

3.6.2. Treatment Program Selecting Interface

Welcome Interface

- 8 -

There are 6 treatment programs that could be selected:

a. Hair removal

b. Skin rejuvenation

c. Pigmentation Therapy

d. Vascular Therapy

e. Acne Therapy

f. RF: Wrinkles Therapy

Select different treatment programs by clicking.

3.6.3. Treatment Program Operation Interface

- 9 -

current treatment program

3 different groups of saved parameter setting.

Click , system will enter into the saved parameters of mode 1

IPL energy display

Click and to increase or decrease IPL energy.

RF energy adjusting

cooling degree adjusting

Pulse1：working time of the first pulse, 1-10ms adjustable.

Pulse 2 and Pulse 3：sub pulse width, 1-10ms adjustable.

Delay1: 1st pulse delay, interval between the 1st pulse and 2nd pulse.

Delay 2 and Delay 3: interval between two pulses.

RF working time, 50-2500ms adjustable.

Pulse amounts

interval between two spots, 1-4s adjustable.

back

water circulating status

- 10 -

lamp status

charging status

counter of shots for the current treatment

standby, click standby, the lamp will be lightened off. Click standby when

treatment finish to turn off the handle

ready, click ready, the lamp of the handle will be lightened up, and light

will be simmered by press the button on the handle

3.6.4. RF Operation Interface

3.6.4.1 Usage of RF handle.

a. Coating the gel evenly (1mm) on the treatment area.

b. Chose different probes for different treatment area.

15mm: eyes, 20mm: forehead, face; 30mm: face, body

c. cling the probe to the skin rightly.

Attention:

a. Do not press the blue button before the probe clinging the skin.

b. Both of the two polars (two parts on the probe) must cling the skin together when

operating.

c. When the operation finishes, release the blue button first, then move the probe out of the skin.

3.6.4 System Setting interface

Inhaltsverzeichnis

Andere mychway Körperpflegeprodukt Handbücher

mychway

mychway LS-9XD1 Bedienungsanleitung

mychway

mychway SM-271 Bedienungsanleitung

mychway

mychway MS-45T6SB Bedienungsanleitung

mychway

mychway LY-10101J Bedienungsanleitung

mychway

mychway WL-7001C Bedienungsanleitung

mychway

mychway GS8.2E Bedienungsanleitung

mychway

mychway MS-1393 Bedienungsanleitung

mychway

mychway YH-5402S Bedienungsanleitung

mychway

mychway MS-11Y6 Bedienungsanleitung

mychway

mychway LT-110F Bedienungsanleitung

mychway

mychway SM-7201NB Bedienungsanleitung

mychway

mychway SR-AF1316 Bedienungsanleitung

mychway

mychway RU+16 Bedienungsanleitung

mychway

mychway WL-LS1002 Bedienungsanleitung

mychway

mychway LT-110E Bedienungsanleitung

mychway

mychway MS-11R1 Bedienungsanleitung

mychway

mychway MS-54D4S Bedienungsanleitung

mychway

mychway MS-5406 Bedienungsanleitung

mychway

mychway HF-11M1 Bedienungsanleitung

mychway

mychway SR-MJ1805H Bedienungsanleitung

mychway

mychway WL-WD678A Bedienungsanleitung

mychway

mychway LS-78D1MAX Bedienungsanleitung

mychway

mychway SR-AF132 Bedienungsanleitung

mychway

mychway SR-901 Bedienungsanleitung

Beliebte Körperpflegeprodukt Handbücher anderer Marken

Pretika

Pretika ST102 Bedienungsanleitung

Beurer

Beurer FC 76 Bedienungsanleitung

Pebble Grey

Pebble Grey 500.40.70-75 Bedienungsanleitung

PUSH

PUSH ortho Bedienungsanleitung

Dermlite

Dermlite DL3N Bedienungsanleitung

DERMAPEN

DERMAPEN SEMI Bedienungsanleitung

HiB

HiB Spectre 50 Bedienungsanleitung

Carex

Carex SunLite Bedienungsanleitung

Roper Rhodes

Roper Rhodes Intense Stücklistenhandbuch

Interacoustics

Interacoustics Titan IMP440 Bedienungs- und Sicherheitshinweise

ReTrak

ReTrak VS001 Bedienungsanleitung

LED Technologies

LED Technologies dpl PAIN RELIEF Joint Wrap Bedienungsanleitung

Casa Lusso

Casa Lusso MVL1000x450PR Bedienungsanleitung

Quoizel

Quoizel QR3326 Montageanleitung

BERTSCHAT

BERTSCHAT HEATED HOODIE PRO - DUAL HEATING Bedienungsanleitung

Beurer

Beurer EM 37 Bedienungsanleitung

ACP

ACP OMNISTAND Bedienungsanleitung

Scarlett

Scarlett VitaSpa SC-CA304PS11 Bedienungsanleitung

mychway HR-BX001 Bedienungsanleitung

Beliebte Körperpflegeprodukt Handbücher anderer Marken