N-Com MCS II Bedienungsanleitung

SAFETY AND INSTRUCTIONS FOR USE

Congratulations on your purchase of an N-Com product.

The N-Com MCS II was built adopting the latest technologies

and the best materials. Long tests and thorough system

development have made it possible to achieve the highest

sound quality.

The MCS II system can only be assembled on Nolan helmets

pre-set for N-Com.

The MCS II system allows you to listen to audio devices

installed on the motorcycles; it CANNOT be used in

conjunction with other audio systems for helmets.

Table of contents

1. WARNINGS AND SAFETY...............................................4

1.1. Reference standards..................................................... 4

1.2. Appropriate use........................................................... 4

1.3. Disposal..................................................................... 6

2. CONTENTS OF THE PACKAGING ....................................7

3. INSTALLING THE MCS II SYSTEM .................................8

3.1. Installing the microphone.............................................11

3.2. Installing the Basic Kit2 MCS on the helmet.....................13

4. REMOVING THE MCS II SYSTEM..................................18

5. OPERATION OF THE MCS II SYSTEM ...........................18

6. MAINTENANCE............................................................19

7. LIMITED WARRANTY ..................................................19

7.1. Warranty coverage......................................................20

7.2. Exclusions and limitations of the coverage.......................20

7.3. Validity of this limited warranty.....................................21

7.4. Procedure for the forwarding of claims............................21

7.5. Product identification...................................................22

8. WARRANTY REGISTRATION FORM..............................23

1. WARNINGS AND SAFETY

Read this user manual carefully and the simple rules listed below. Failure to

comply with these rules may lead to dangerous situation.

Caution: The product cannot be used in official or unofficial competitions,

motordromes, circuits, racing tracks and the like.

Caution: Installation of the MCS II Harley Davidson / Honda Goldwing

system results in a weight increase of approximately 100g, which is added

to the weight of the helmet and of the other accessories.

Warning: The electronic components of the N-Com mounted inside the

helmet are not waterproof. Consequently, make sure the inside of the

helmet, including the comfort padding, does not get wet in order to avoid

damage to the system. If it does, remove the N-Com system and comfort

padding and let it air dry.

1.1. Reference standards

The MCS II product of the N-Com line complies with EEC Directive.

EMC 2004/108

1.2. Appropriate use

Always obey all Traffic Regulations in force. While riding your motorcycle,

your hands should always be engaged in the actual riding. Any

operation to the N-Com system must be carried out with the vehicle

stopped.

In all cases, obey the Traffic Regulations and remember that riding your

motorcycle has absolute priority over any other manoeuvre.

Adjust the volume to a level that does not disturb or distract you while

riding and at the same time allows you to distinctly heal background

noises.

Caution: Adjust the volume of the N-Com system (where provided) and of

the audio sources connected to it before you use it on the road.

Caution: Adjusting the volume to very high levels may cause damage to

your hearing

Caution: Adjust the volume of the N-Com system (where provided) and of

the audio sources connected to it so as to avoid audio reproduction at high

volumes. Constant exposure to high volumes may damage your hearing.

Caution: Improperly installing the system in the helmet may alter the

aerodynamic and safety properties of the helmet itself, thus creating

dangerous conditions. Install the N-Com system according to the

instructions provided in the product documentation. In case of doubt,

contact our local N-Com dealer.

All telephones and devices with wireless signal transmission are subject to

interferences that may affect the performance of the device connected

to them. These interferences are not ascribable to a defect of the N-

Com system.

Use the device in the normal position only, as described in the product

documentation. Do not attempt to disassemble, tamper with or modify

any part of the N-Com system.

Only qualified personnel can carry out technical assistance on this product.

In case of any malfunction, always turn to your local dealer. The helmet

is a safety device. Tampering with it and/or with the electronic system

inside the helmet can lead to dangerous situations, in addition to

invalidating the product warranty.

1.3. Disposal

Refer to this user manual when disassembling the system from the helmet.

Once the system has been disassembled, dispose of it according to the

instructions provided here below.

The presence of a crossed-out wheelie bin indicates that in the

European Union the product must be disposed of separately at the

end of its useful life (European Directive 2002/96/EC).

Do not dispose of these products together with undifferentiated

urban waste.

Proper disposal of obsolete equipment contributes to preventing possible

negative consequences on people’s health and on the environment.

For more detailed information on the disposal of obsolete equipment,

please contact your municipality, a waste disposal service or the store

where the product was purchased.

2. CONTENTS OF THE PACKAGING

Basic Kit2 MCS

Removable Microphone

Honda Goldwing connection cable

Harley Davidson connection cable

Key

Clamp Microphone-Stop

Washer and screw

Adhesive Velcro pads

Microphone securing stickers

3. INSTALLING THE MCS II SYSTEM

Fig. 1

Fig. 2

Fig. 3

Remove the “N-Com” protection

plate located on the helmet

shell (Fig. 1) and open the

helmet chin guard (flip up

helmets).

Remove the right and left cheek

pads from the helmet (see

specific instructions provided

in the user manual of the

helmet).

Remove the Noise Reducers from

the two cheek pads, and tear

off the pre-cut plastic (if

equipped).

Fig. 4

Fig. 5

Fig. 6

Remove the back of the comfort

padding by pulling on the neck

roll until it separates from the

shell (Fig. 4).

Temporarily put the padding on the

outside of the helmet (Fig. 5).

Remove the N-Com cover from the

helmet border gasket. Push from

the inside of the helmet to

facilitate the removal (Fig. 6).

Fig. 7

ONLY FOR FULL-FACE HELMETS

Remove the chin guard by

pulling on the special red tab.

Fig. 8

Remove the right and left

polystyrene cheek pads by

gently pulling them out of the

helmet. The helmet shell can

be opened slightly to facilitate

the removal of the cheek pad .

Caution: In case the polystyrene

cheek pad is damaged during this

operation, turn to your local dealer

for its replacement.

Andere Handbücher für MCS II

Inhaltsverzeichnis

Andere N-Com Konferenzsystem Handbücher

N-Com

N-Com BX5 Bedienungsanleitung

N-Com

N-Com MCS II Bedienungsanleitung

N-Com

N-Com B802 Bedienungsanleitung

N-Com

N-Com BX4 PLUS Bedienungsanleitung

N-Com

N-Com bluetooth kit multi Bedienungsanleitung

N-Com

N-Com multi 3 Bedienungsanleitung

N-Com

N-Com basic kit multi Bedienungsanleitung

N-Com

N-Com B5 Bedienungsanleitung

N-Com

N-Com MCS II Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung