Nagasoft NSCaster X1 Bedienungsanleitung
NSCaster X1
User Guide
REV 599
Copyright © 2006-2018 NANJING NAGASOFT CORPORATION
All rights reserved
Table of Contents
1 HARDWARE SPECIFICATION.......................................................................................................................... 1
1.1 LIST ACCESSORIES......................................................................................................................................1
1.2 DEVICE PARAMETERS.................................................................................................................................1
1.3 MODEL....................................................................................................................................................2
1.4 INTERFACE DIAGRAM.................................................................................................................................2
1.4.1 Back Interface..................................................................................................................................2
1.4.2 Side Interface...................................................................................................................................3
1.4.3 Bottom interface............................................................................................................................. 4
2 INSTALLATION AND COMMISSIONING......................................................................................................... 5
3 SOFTWARE FEATURES....................................................................................................................................8
3.1 NSCASTER-X1 MAIN INTERFACE................................................................................................................. 8
3.1.1 PGM..................................................................................................................................................8
3.1.2 SDI Channel...................................................................................................................................... 9
3.1.3 HDMI Channel..................................................................................................................................9
3.1.4 NET Channel...................................................................................................................................10
3.1.5 DDR Channel.................................................................................................................................. 10
3.1.6 Image Overlay............................................................................................................................... 11
3.1.7 PIP (Picture in Picture)...................................................................................................................13
3.1.8 Scoreboard.....................................................................................................................................14
3.1.9 Audio Mixer................................................................................................................................... 15
3.2 NSCASTER-X1 SETTINGS INTERFACE.......................................................................................................... 16
3.2.1 Channel Recording.........................................................................................................................16
3.2.2 Recording....................................................................................................................................... 17
3.2.3 Streaming.......................................................................................................................................18
3.2.4 Clock............................................................................................................................................... 20
3.2.5 Network......................................................................................................................................... 21
3.2.6 File Transfer................................................................................................................................... 22
3.2.7 General Settings............................................................................................................................ 24
3.2.8 About..............................................................................................................................................25
4 QUESTIONS AND ANSWERS.........................................................................................................................26
1
1 Hardware Specification
1.1 List Accessories
1.2 Device Parameters
Device Item Name
Description
Chassis
Portable case, built-in with 11.6-inch high-definition touch screen
Dimensions
294mm*193mm*54mm (W x H x D)
Weight
1.25KG
Powered by
100~240V AC
Transport box
Carton
Operating temperature
-10-50℃
Storage temperature
-20-70℃
Operating humidity
10~90% no condensation
Impact resistance
15g
Vibration resistance
10-100Hz 1.25g
Altitude
Below 4000 meters
Name/Model
Package
Specification
Number
of Pieces
Actual
Quantity
Remarks
Main device
Carton
packaging
NSCasterX1
1
1
Power supply and
power cord
Carton
packaging
Standard
1
1
WIFI antenna
Carton
packaging
Standard
1
1
4G antenna
Carton
packaging
Standard
2
2
Standard
Version
4G antenna
Carton
packaging
Standard
3
3
4G Bonding
Version
User manual
Carton
packaging
Nagasoft Custom
1
1
Warranty card
certificate
Carton
packaging
Nagasoft Custom
1
1
2
1.3 Model
Standard Version 4G Bonding Version
1.4 Interface Diagram
1.4.1 Back Interface
1) The back interface of the standard version is shown below:
1
4G antenna
7
USB3.0
13
HDMI Display interface
2
4G antenna
8
Gigabit Ethernet port
14
HDMI PGM Output
3
WIFI antenna
9
SDI-1 Input
15
SDI PGM Output
4
Switch
10
SDI-2 Input
16
TALLY
5
Power supply（DC 19V）
11
HDMI-1 Input
17
Cooling port
6
USB2.0
12
HDMI-2 Input
17
3
2) The back interface of the 4G bonding version is shown below:
1
4G antenna
8
Switch
15
HDMI-1 Input
2
4G antenna
9
Power supply（DC 19V）
16
HDMI-2 Input
3
4G antenna
10
USB2.0
17
HDMI Display Interface
4
WIFI antenna
11
USB3.0
18
HDMI PGM Output
5
SIM1 card holder
12
Gigabit Ethernet port
19
SDI PGM Output
6
SIM2 card holder
13
SDI-1 Input
20
TALLY
7
SIM3 card holder
14
SDI-2 Input
21
Cooling port
1.4.2 Side Interface
The side interface for both standard version and 4G bonding version are the same as shown below:
1
XLR/TRS balanced input L
4
XLR/TRS balanced output L
2
XLR/TRS balanced input R
5
XLR/TRS balanced output R
3
3.5mm monitor
21
4
1.4.3 Bottom interface
1) The bottom interface of the standard version is shown below:
1
SIM card holder
2
Inlet
2) The bottom interface of the 4G bonding version is shown below:
1
Inlet
5
2 Installation and Commissioning
1) Open the box, then take out the power cord and NSCaster-X1 device. After that, lay the device
on a stable surface.
2) Connect the power cord and the corresponding WIFI and 4G antennas. Then, use a network
cable to connect to the RJ45 Gigabit Ethernet port, or insert a 4G card.
3) Connect the output of the AV equipment (such as camera) to the NSCaster-X1 device input
interface.
The SDI/HDMI camera is connected to the SDI/HDMI input via SDI/HDMI cable as shown
below:
The mixer is connected to the TRS MIC input port through the TRS cable, or the XLR cable is
connected to the XLR input as shown below:
4) In order to connect the NSCaster-X1 device output port to the monitor, it has divided into
following categories:
The SDI monitor is connected to the SDI output via an SDI cable.
The HDMI monitor is connected to the HDMI output via HDMI cable.
5) Connect the sound output of the NSCaster-X1 device to an external device or monitor.
Connect to the TRS MIC output through the TRS cable, or connect to the XLR output
interface through the XLR cable as shown below:
6
Connect to the call output interface through a 3.5mm audio cable as shown below:
6) To start the NSCaster-X1 device, just press the power button on the NSCaster-X1 device as
shown below:
7) After the NSCaster-X1 device is started, it will enter the main interface of NSCaster-X1 as shown
in the following figure:
7
8) The SDI video signal and HDMI video signal are directly loaded into the main interface.
9) To load NET signal, select " " in the NET channel and enter the stream in the pop-up stream
edit box.
10) To load DDR signal, select the DDR button in the DDR alternate video window, and select one of
the video sources, then click Play to load the video into the DDR channel.
11) Select the output channel and press the record button " " to start record.
12) To start switching, tap once on the channel you want (SDI-1,SDI-2,HDMI-1,HDMI-2,NET,DDR) and
it will switch to PGM.
13) Start uploading the picture on PGM as shown below:
14) Press again the record button to stop recording.
15) Check whether all the recording files are normal. The recording file is saved in the “Recording”
folder which located at the “File Transfer” interface.
16) Press the Power On/Off button to turn off the NSCaster-X1 device.
17) Turn off the power switch of the device, unplug the power supply, and unplug all input and
output video cables and antennas, then keep the NSCaster-X1 device properly.
8
3 Software Features
3.1 NSCaster-X1 Main Interface
NO
Name
NO
Name
1
PGM
9
Streaming control
2
SDI input channel
10
Recording control
3
HDMI input channel
11
Tuning control for total mix output
4
NET input channel
12
Image overlay
5
DDR display channel
13
PIP (Picture in picture)
6
Network status display
14
Scoreboard
7
Resource usage monitoring status
15
Audio mixer
8
Settings button
16
DDR
3.1.1 PGM
PGM channel: Monitor the screen that being broadcast. Single tap on the channel you want (SDI-
1,SDI-2,HDMI-1,HDMI-2,NET,DDR) and it will switch to PGM as shown below:
Andere Handbücher für NSCaster X1
1
Inhaltsverzeichnis
