Nano Vision UM-430 Bedienungsanleitung
Otherwise, it may result in personal injury or property damage.
Warning/Cautions
These safety instructions must be followed to ensure your safety and
prevent property damage.
UM-430
UM-710
UM-730
UM-740
UM-750
NANO V I S I ON
User’s Manual
http://www.nanovision.co.kr
Product Input/Output Connectors
- Do not insert any metal, such as chopsticks, coins,
pins and steel,
- If foreign material enters the product, disconnect the
USB cable and contact a Service Center.
Using DMB (UM-750 Only)
- Do not use the product near a microwave oven or a
refrigerator.
- Electric wave or a radio wave may affect signal
reception.
- Be careful with use of the Rod Antenna. It may
cause personal injury on eyes
Table of Contents
Safety Instructions
Product Features
Package Contents
Connections and Installation
Installing Monitor Driver
mimo Display Setting
Installing Touch Screen Controller
System Requirements and Restriction
Troubleshooting
Specifications
04
06
07
08
09
11
12
16
17
20
User’s Manual
Do not force on LCD(Touch Panel) Screen
- Do not tap or scratch LCD(Touch Panel) Screen with
a sharp object.
Otherwise, LCD(Touch Panel) may get damage.
Clean the product using a soft cloth with a
monitor cleaner only.
- Make sure to disconnect USB Cable while cleaning
- Ensure that water does not enter the product and
that it is not wet.
Otherwise, this may result in electric shock, fire or
a malfunction.
04|
Safety Instructions
Make sure to read the instructions carefully and use the product in the correct manner.
Otherwise, it may result in personal injury or property damage.
Warning/Cautions
Power Source:
- Make sure to use USB Cable (DC 5V, 500mA) only.
mimo doesn’t require any additional power source
Do not place mimo in a location exposed to
moisture, dust, smoke, water, or in a car.
Otherwise, this may result in electric shock or fire.
These safety instructions must be followed to ensure your safety and
prevent property damage.
|05
Product Input/Output Connectors
- Do not insert any metal, such as chopsticks, coins,
pins and steel,
- If foreign material enters the product, disconnect the
USB cable and contact a Service Center.
Do not install mimo in an unstable location.
- Otherwise, it may fall and cause personal injury
and/or damage the product.
Ensure that users do not disassemble, repair or
modify the product themselves.
- If the product needs to be repaired, contact a
Service Center.
Using DMB (UM-750 Only)
- Do not use the product near a microwave oven or a
refrigerator.
- Electric wave or a radio wave may affect signal
reception.
- Be careful with use of the Rod Antenna. It may
cause personal injury on eyes
If water enters the product, disconnect the USB and contact a Service Center.
This may result in a product malfunction, electric shock, or fire.
* Product Colors and Designs may vary upon each product and above listed specifications are subject to
change without prior notice
06|
Product Features
mimo is a USB powered monitor with Webcam, Mic, DMB TV, Touch
Screen Display.
With only USB cable connection, a user may utilize mimo as Multiple
Input/Output device for Video Conference, Instant Messaging, News and
Stock casting.
Each model has different functions and features as listed Product Matrix below
Product Matrix
Model Name
Extension
Monitor
Earphone Out
Built-in MIC
Touch Swich
Webcam
Touch Screen
Color
Photo
UM-430
●● ●
●
●
●
●
●
●
●
●●
●
DTV ●
●
●
●
●
●
White+ Orange
White + Green
White + Green
Black + Silver
Black
Wine
Black
Wine
Black
Wine
UM-710 UM-730 UM-740 UM-750
|07
※ Package Contents are subject to vary upon each model If any items are missing, contact your
dealer.
Package Contents
Please make sure the following items are included with your monitor.
Contact a local dealer to buy optional items.
UM-430 USB CABLE
Audio Cable(UM-730, UM-750) Rod Antenna (UM-750) Extension Antenna (UM-750)
User’s Manual Install Disc
UM-710/730/740/750 USB CABLE
UM-430 UM-710 UM-730, UM-740, UM750
08|
Connections and Installation
① Emergency Power input : mimo doesn’t require any additional power source except USB.
Emergency Power input is for Factory or Technical Service purpose only.
② USB (mini B type) input : Using provided USB cable, connect your mimo with PC
③ Stereo In : Connect the provided stereo cable to the PC’s stereo out (UM-730/740/750)
④ Mic : Connect the provided stereo cable to the PC’s Mic in (UM-730/740/750)
⑤ Speaker out : Relay PC sound to Speakers or Headphones (UM-730/740/750)
⑥ DMB Antenna : Connect the provided Antenna (UM-750 only)
Buttons
System Requirements
CPU : Intel Pentium/Celeron/AMD/K6/Athlon/Duron 1.2GHz or above
RAM : 512MB RAM or above
USB : at least one or more USB2.0 port
HDD : 30MB HDD space above
O/S : Windows 2000 SP4/XP SP2 32bit/Vista 32bit
Using the Software
With only USB cable connection, a user may operate mimo as a Extension monitor with
Webcam, Mic, Touch Screen Display, DMB TV.
(For more detail functions and features please refer to page 4 “Product Features”)
mimo requires USB connection only.
Standby on/off
LCD Brightness +/-
①
①②③④
②③④
⑥
⑤
|09
Installing Monitor Driver (AutoRun)
Installation takes about 1 minute.
Do not power off or disconnect the USB cable until installation is completely finished. This
may damage systems or may cause system errors.
The mimo screen resolution is fixed for the best picture quality with each model.
1. Click the correct model name of your
mimo (model name is printed on the
product label at the rear case of the
product)
2. Select "I agree to the terms of the
license agreement" to accept the
terms of use
3. Select the Driver(s) you wish to
install and click “Next”
(If the CD is not running automatically please double-
click the “Mimo Drive”among the CD clontents)
Insert the CD into the CD-ROM drive
Please make sure that your mimo is
connected to the PC
10|
5. If you see following message window, select “I agree”to accept the terms of use
7. After finish installation of the mimo driver,
please follow below steps for multi-monitor
setting. (MicrosoftWindowsXP Operating
System)
① Right-click on desktop then click “Display
Properties”
② Choose ‘Setting’then you may see
connected monitors
③ Align the monitors displayed in [Display
Properties] as the same as actual monitor
usage.
④ Click ‘OK’to confirm.
6. When the installation is complete, the mimo setting icon appears on your system
tray and the connected USB monitor information will pop-up.
※ UM-430 (4.3”model) won’t be displayed in [Display Properties] window, you may use
mimo icon at the system tray for the monitor alignment.
|11
mimo display setting
2. Click-on mimo icon then you may see the mimo setup menu for Screen Resolution,
Colors, Rotation, Extention and etc.
1. When the mimo driver installation is complete, the mimo setting icon appears on
your system tray.
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Nano Vision Monitor Handbücher
