Narada NPFC Series Bedienungsanleitung
LiFePO4Battery Module for Telecom
NPFC Series
Operation Manual
Version: 8.3
NARADA POWER SOURCE CO., LTD
Table of Contents
Part 1 – Safety & Warning ............................................................................................................. 1
Part 2 – Product Introduction ........................................................................................................ 2
2.1 – Overview....................................................................................................................... 2
2.2 – Working Principle.......................................................................................................... 2
2.3 – Battery Management System (BMS).............................................................................. 3
2.4 – Applications .................................................................................................................. 3
2.5 – Battery Model Instruction ............................................................................................. 4
2.6 – Electric Performance ..................................................................................................... 4
2.7 – Structure and Mechanical Performance ........................................................................ 5
Part 3 – Technical Characteristics .................................................................................................. 8
3.1 – Discharge Performance ................................................................................................. 8
3.2 – Charge Performance...................................................................................................... 8
3.3 – Constant Current/Power Discharge Datasheet .............................................................. 9
Part 4 – Operation & Maintenance...............................................................................................12
4.1 – Requirements for Operation Environment ...................................................................12
4.2 – Parameter Settings of Power Plant...............................................................................12
4.3 – Layout of Front Panel ...................................................................................................13
4.4 – Installation ...................................................................................................................14
4.4.1 – Unboxing & Inspection ......................................................................................14
4.4.2 – Preparation for Installation ...............................................................................15
4.4.3 – Installation of Battery Modules .........................................................................15
4.5 – Maintenance ................................................................................................................17
Part 5 – Troubleshooting & Solutions ...........................................................................................18
Annex 1 – Instructions for LED Flicker...........................................................................................19
Annex 2 – Instructions for Dialing of ADD.....................................................................................20
Annex 3 – Communication Protocol for RS232 and RS485............................................................21
Annex 4 –LCD Menu Instruction ...................................................................................................24
Part 1 – Safety & Warning 1
LiFePO4Battery Module for Telecom Operation Manual V8.3 2016
Part 1 – Safety & Warning
The NPFC series LiFePO4battery system installation, operation, maintenance should follow
important recommendations in this manual:
The equipment shall be installed by the professional training staff
Battery maintenance should be carried out by the experienced professionals and aware
of the preventive measures on the potential harm of the battery.
Note: Be care of the risk of electric shock for large current in case of battery short
circuit, pay attention to the following points during operation
Remove watches, rings or other metal objects
Use tools with insulated handles
Do not place tools or metal objects on the battery
Do not direct access to the battery system to the mains grid power outlet
Do not put the battery system into fire, do not use or storage the battery near to the
high temperature source
Do not use liquid or other objects placed into the battery system.
Do not open or cut the battery, not to hit, throw or step on the battery
Using special communication between battery module and power plant to charge
battery
Be sure to subject to charge and discharge parameters setting in this manual
The output interface of the system is still voltage when grid power cut, avoid electric
shock or short circuit when operation
Please check if the box is damaged. If damaged, please immediately notify the supplier
If you find leaking liquid or white powder residue on product, prohibit operation.
2 Part 2 – Product Introduction
LiFePO4Battery Module for Telecom Operation Manual V8.3 2016
Part 2 – Product Introduction
2.1 – Overview
NPFC series battery system is 48V system for communications back-up type LiFePO4(lithium
iron phosphate) battery products, the system uses the advanced LiFePO4battery technology with
the benefit of long cycle life, small size, light weight, safety and environmental protection, and
has a strong environmental adaptability, it is idea for harsh outdoor environments.
The system also integrates a smart battery management and monitoring module, support
for remote centralized monitoring and remote battery management and maintenance, to meet
the requirements of unattended. Therefore, the NPFC system can fully meet the backup power
supply requirements of the access network equipment, mobile communications equipment,
transmission equipment, micro base stations and microwave communication equipment.
2.2 – Working Principle
The NPFC battery system mainly includes Fe lithium battery pack, battery protection, cell
balancing unit, monitoring module and charge-discharge management module for optional. Its
schematic diagram shown in Figure 2.1
Fig. 2.1 – Schematic Diagram
LFP cells Chemical power, energy storage and power supply components.
Battery protection Protect LFP cells against overcharge, over discharge, over current, over temperature, short
circuit
Cell balancing Equalization LFP cells for cells unbalanced
Charge-discharge
management
Discharge circuit management, and charging current limit (optional according to customer
requirements)
Monitoring Support centralized monitoring system (optional according to customer requirements)
Charge-discharge
mana
g
ement
LFP cells
Cell balancing Cell protection
Monitoring
DC
Input Loa
d
Part 2 – Product Introduction 3
LiFePO4Battery Module for Telecom Operation Manual V8.3 2016
NPFC battery working principle:
DC power input charge and discharge management unit after filter, DC divided two circuits,
one circuit directly supply the load, another circuit to charge Fe lithium pack. When grid power
on, the system supply the loads and charging inside Fe lithium batteries; When grid power failure,
Fe lithium inside system supply DC power to the load, to ensure uninterrupted power supply as
power system.
2.3 – Battery Management System (BMS)
Smart BMS technology is adopted for battery modules of NPFC series to assure smart
automatic management for batteries. Features of BMS are shown as below:
There is a centralized monitoring unit in BMS. Functions such as remote measurement,
remote communication, remote controlling are available. Battery modules can be
controlled remotely by staffs in control center. NPFC series are in line with the
requirements of the development of modern communications technology.
It is combined by technologies of power source and computer. Parameters and status
of rectifiers and AC/DC distributions can be detected and controlled.
Excellent electromagnetic compatibility. BMS used for battery modules of NPFC series
can comply with the outdoor power plants during operation, no interfere with each
other.
BMS can provide protections against overcharge, over-discharge, over-temperature,
overcurrent, short circuit, etc., to assure reliable safety and operation life.
With patented cell balancing technology, BMS provide high efficiency for cell balancing
and prolong system operate life.
Configuration flexibility, support parallel connection expansion
2.4 – Applications
Network Telecommunication Facilities
OSP
Terminal of FTT X
Access network system
Indoor distribution system
Telecom BTS
Integrated outdoor power cabinet
UPS
4 Part 2 – Product Introduction
LiFePO
4
Battery Module for Telecom Operation Manual V8.3 2016
Internet data center (IDC)
Solar energy
Common Bonding Network (CBN) and or Isolated Bonding Network (IBN)
2.5 – Battery Model Instruction
Fig. 2.2 – Instruction of Battery Model for NPFC Series
2.6 – Electric Performance
Table 2.1 – Battery Model & Electric Performance of NPFC Series
Battery
Model
①
Rated
Voltage
②
(
V)
Rated
Capacity
③
(Ah)
Voltage
Rage (V)
Charge
Voltage (V)
Charge Current (A) Max.
Discharge
Current (A)
Recomm. Max.
48NPFC10 48 10 40.5 to 54.5 54.0 2 10 10
48NPFC10-2C 48 10 40.5 to 54.5 54.0 2 10 20
48NPFC20 48 20 40.5 to 54.5
54.0 4 20 20
48NPFC20-2C 48 20 40.5 to 54.5 54.0 4 20 40
48NPFC30 48 30 40.5 to 54.5
54.0 6 20 20
48NPFC50 48 50 40.5 to 54.5
54.0 10 50 50
48NPFC70 48 70 40.5 to 54.5
54.0 10 60 60
48NPFC80 48 80 40.5 to 54.5
54.0 15 80 80
NOTES
①
Battery
Model
Battery models listed in the datasheet are standard products. Narada can also
supply customized design in cell, BMS and dimensions for various application
scenarios.
②
Rated Voltage 48V = 3.20Vpc * 15pcs (Rated voltage of each LFP cell is 3.20Vpc)
③
Rated
Capacity Five hour rate capacity (0.2C to 40.5V at 25℃)
Part 2 – Product Introduction 5
LiFePO
4
Battery Module for Telecom Operation Manual V8.3 2016
2.7 – Structure and Mechanical Performance
Fig. 2.3 – Structural Drawing of NPFC Series Batteries (48NPFC10 as sample)
Fig. 2.4 – Battery Output Terminal
Table 2.2 – Mechanical Performance of NPFC Series
Battery
Model
①
Rated
Voltage
(V)
Rated
Capacity
(Ah)
Dimensions (mm) Weight
(kg)
Battery
Output
Terminal
Width Depth Height
48NPFC10 48 10 442 245 44 1U 7.3 10mm / M4
48NPFC20 48 20 442 245 88 2U 13.4 10mm / M4
48NPFC30 48 30 442 245 133 3U 18.4 10mm / M4
48NPFC50 48 50 442 390 133 3U 32.0 13mm / M6
48NPFC70 48 70 442 400 133 3U 40.5 13mm / M6
48NPFC78 48 80 442 400 225 5U 44.0 13mm / M6
6 Part 2 – Product Introduction
LiFePO4Battery Module for Telecom Operation Manual V8.3 2016
Fig. 2.5 – Appearance & Mechanical Drawing of 48NPFC10
Fig. 2.6 Appearance & Mechanical Drawing of 48NPFC20
Fig. 2.7 Appearance & Mechanical Drawing of 48NPFC30
Fig. 2.8 Appearance & Mechanical Drawing of 48NPFC50
Part 2 – Product Introduction 7
LiFePO4Battery Module for Telecom Operation Manual V8.3 2016
Fig. 2.9 Appearance & Mechanical Drawing of 48NPFC70
Fig. 2.10 Appearance & Mechanical Drawing of 48NPFC80
8 Part 4 – Operation & Maintenance
LiFePO
4
Battery Module for Telecom Operation Manual V8.3 2016
Part 3 – Technical Characteristics
3.1 – Discharge Performance
Fig. 3.1 – Constant Current Discharge Curve of NPFC Series
3.2 – Charge Performance
Fig. 3.2 – Charge Characteristic with Various Current Limitation of NPFC Series
Andere Handbücher für NPFC Series
2
Dieses Handbuch passt für folgende Modelle
8
Inhaltsverzeichnis
Andere Narada Steuereinheit Handbücher
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
