National Instruments NI cRIO-9111 Bedienungsanleitung

EXPLOSIVE ATMOSPHERES USER GUIDE

cRIO-9111/9112/9113/9114/

9116/9118

cRIO-9111: 4-Slot, Virtex-5 LX30 FPGA CompactRIO Chassis (Legacy)

cRIO-9112: 8-Slot, Virtex-5 LX30 FPGA CompactRIO Chassis (Legacy)

cRIO-9113: 4-Slot, Virtex-5 LX50 FPGA CompactRIO Chassis (Legacy)

cRIO-9114: 8-Slot, Virtex-5 LX50 FPGA CompactRIO Chassis (Legacy)

cRIO-9116: 8-Slot, Virtex-5 LX85 FPGA CompactRIO Chassis (Legacy)

cRIO-9118: 8-Slot, Virtex-5 LX110 FPGA CompactRIO Chassis (Legacy)

Physical Characteristics

Weight

cRIO-9111 581 g (20 oz)

cRIO-9112 880 g (31 oz)

cRIO-9113 581 g (20 oz)

cRIO-9114 880 g (31 oz)

cRIO-9116 880 g (31 oz)

cRIO-9118 880 g (31 oz)

Dimensions Visit ni.com/dimensions and search by model

number.

Environmental

Temperature

Operating -40 °C to 70 °C

Storage -40 °C to 85 °C

Notice If the ambient temperature is 56 °C to 70 °C, you must mount the chassis

on a thermally conductive material. For information about how mounting

configuration can affect the accuracy of C Series modules, visit ni.com/info and

enter the Info Code rdcriotemp. Measure the ambient temperature at each side of

the CompactRIO system, 63.5 mm (2.5 in.) from the side, and 25.4 mm (1 in.) from

the rear cover of the system

Ingress protection IP40

Operating humidity 10% RH to 90% RH, noncondensing

Storage humidity 5% RH to 95% RH, noncondensing

Pollution degree 2

Maximum altitude 5,000 m

Indoor use only.

Hazardous Locations

Explosive atmospheres rating Ex nA IIC T4 Gc

CCC certificate number 2021312310000318

Safety Guidelines

Operate the product only as described in this document.

Caution This icon denotes a caution, which advises you to consult documentation

where this symbol is marked.

Caution Do not operate this product in a manner not specified in this document.

Product misuse can result in a hazard. You can compromise the safety protection

built into the product if the product is damaged in any way. If the product is

damaged, return it to NI for repair.

Safety Guidelines for Hazardous Locations

These products have been evaluated as Ex nA IIC T4 Gc equipment and are CCC certified.

Each product is suitable for use within ambient temperatures of -40 °C ≤ Ta ≤ 70 °C in either

nonhazardous locations or Zone 2 hazardous locations.

Follow these guidelines if you are installing the product in a potentially explosive

environment. Not following these guidelines may result in serious injury or death.

Caution Do not disconnect the power supply wires and connectors from the

product unless power has been switched off.

Caution Do not disconnect I/O-side wires or connectors unless power has been

switched off or the area is known to be nonhazardous.

2| ni.com | cRIO-9111/9112/9113/9114/9116/9118

Caution Do not remove modules unless power has been switched off or the area is

known to be nonhazardous.

Caution Substitution of components may impair suitability for Zone 2.

Caution You must make sure that transient disturbances do not exceed 140% of

the rated voltage.

Caution The system shall only be used in an area of not more than Pollution

Degree 2, as defined in IEC/EN 60664-1.

Caution The system shall be mounted in a CCC-certified enclosure with a

minimum ingress protection rating of at least IP54 as defined in GB3836.1.

Caution The enclosure must have a door or cover accessible only by the use of a

tool.

Power Requirements

These power requirements are for a fully loaded chassis and exclude the power requirements

of the controller and the I/O modules in the chassis.

Chassis power consumption/dissipation

cRIO-9111 and cRIO-9112

+5 VDC 500 mW maximum

+3.3 VDC 2,100 mW maximum

Total chassis power

consumption

2,600 mW maximum

cRIO-9113 and cRIO-9114

+5 V DC 500 mW maximum

+3.3 V DC 2,800 mW maximum

Total chassis power

consumption

3,300 mW maximum

cRIO-9116

+5 V DC 500 mW maximum

+3.3 V DC 4,600 mW maximum

Total chassis power

consumption

5,100 mW maximum

cRIO-9111/9112/9113/9114/9116/9118 | © National Instruments Corporation | 3

cRIO-9118

+5 V DC 500 mW maximum

+3.3 V DC 5,400 mW maximum

Total chassis power

consumption

5,900 mW maximum

Installing the Controller on the Chassis

Complete the following steps to install the controller on the chassis.

1. Make sure that no power is connected to the controller or the chassis.

2. Align the controller with the chassis.

3. Slide the controller onto the controller slot on the chassis. Press firmly to ensure the

chassis connector and the controller connector are mated.

4. Using a number 2 Phillips screwdriver, tighten the two captive screws on the front of the

controller to 1.3 N · m (11.5 lb · in.) of torque.

Installing C Series Modules

Verify that power is not connected to the I/O connector(s) on the C Series module.

Removing C Series Modules

Verify that power is not connected to the I/O connector(s) on the C Series module before you

remove a module from the chassis.

Product Certifications and Declarations

To obtain product certifications and the DoC for NI products, visit ni.com/product-

certifications, search by model number, and click the appropriate link.

Worldwide Support and Services

NI corporate headquarters is located at 11500 North Mopac Expressway, Austin, Texas,

78759-3504, USA.

4| ni.com | cRIO-9111/9112/9113/9114/9116/9118

cRIO-9111/9112/9113/9114/9116/9118 | © National Instruments Corporation | 5

Information is subject to change without notice. Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for

information on NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their

respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your

software, the patents.txt file on your media, or the National Instruments Patent Notice at ni.com/patents. You can find

information about end-user license agreements (EULAs) and third-party legal notices in the readme file for your NI product. Refer

to the Export Compliance Information at ni.com/legal/export-compliance for the NI global trade compliance policy and how

to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES NO EXPRESS OR IMPLIED WARRANTIES AS

TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR ANY ERRORS. U.S.

Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable

limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.

378474A-01 April 20, 2021

Andere Handbücher für NI cRIO-9111

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere National Instruments Chassis Handbücher

National Instruments

National Instruments cDAQ-9188XT Bedienungsanleitung

National Instruments

National Instruments VXI-1200 Bedienungsanleitung

National Instruments

National Instruments SCXI-1000 Bedienungsanleitung

National Instruments

National Instruments PXI NI PXI-1052 Bedienungsanleitung

National Instruments

National Instruments PXI-1031DC Bedienungsanleitung

National Instruments

National Instruments NI cDAQ-9184 Bedienungsanleitung

National Instruments

National Instruments SCXI-1000 Bedienungsanleitung

National Instruments

National Instruments NI PXI-1006 Bedienungsanleitung

National Instruments

National Instruments PXIe-1092 Handbuch

National Instruments

National Instruments PXI Express PXIe-1066DC Bedienungsanleitung

National Instruments

National Instruments cDAQ Handbuch

National Instruments

National Instruments NI cDAQ-9188 Betriebsanleitung

National Instruments

National Instruments NI PXI-1031 Bedienungsanleitung

National Instruments

National Instruments NI 9144 Bedienungsanleitung

National Instruments

National Instruments PXI-1025 MegaPAC Bedienungsanleitung

National Instruments

National Instruments PXI-1010 Bedienungsanleitung

National Instruments

National Instruments NI cDAQ-9181 Bedienungsanleitung

National Instruments

National Instruments SCXI-1373 Bedienungsanleitung

National Instruments

National Instruments cRIO-9081 Bedienungsanleitung

National Instruments

National Instruments NI PXI-1044 Bedienungsanleitung

National Instruments

National Instruments PXI EXPRESS PXIe-1095 Bedienungsanleitung

National Instruments

National Instruments PXIe- 1065 Bedienungsanleitung

National Instruments

National Instruments 9155 Bedienungsanleitung

National Instruments

National Instruments PXI-1011 Bedienungsanleitung

Beliebte Chassis Handbücher anderer Marken

Advantech

Advantech IPC-623 Series Bedienungsanleitung

IMC Networks

IMC Networks iMcV/18 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR665 V3 Bedienungsanleitung

Wuntronic

Wuntronic PCI4DRQ Bedienungsanleitung

EtherWAN

EtherWAN EMC400 Bedienungsanleitung

Overland Storage

Overland Storage SnapSAN S1000 Leitfaden

Philips

Philips LC4.1E A Bedienungsanleitung

Supermicro

Supermicro SCF418 Series Bedienungsanleitung

Chenbro

Chenbro RM437 Series Bedienungsanleitung

Pickering

Pickering 40-914 Bedienungsanleitung

HP A7503-S Montageanleitung

Supermicro

Supermicro SC823MTQ-R700LPB Bedienungsanleitung

SilverStone

SilverStone RMS08 Series Bedienungsanleitung

NI cRIO-FRC II Bedienungsanleitung

Pickering

Pickering 65-200 Bedienungsanleitung

Allied Telesis

Allied Telesis AT-MMCR18 Bedienungsanleitung

Hisense

Hisense MSD6586 Bedienungsanleitung

Cisco

Cisco Nexus 7010 Bedienungsanleitung