National Instruments CRIO-9039 Bedienungsanleitung

(217) 352-9330 | [email protected] | artisantg.com

ARTISAN

TECHNOLOGY

GROUP

Your definitive source

for

quality

pre-owned

equipment.

Artisan Technology

Group

Full-service,

independent

repair

center

with

experienced

engineers

and

technicians

on staff.

buy

your

excess,

underutilized,

and

idle

equipment

along

with

credit

for

buybacks

and

trade-ins

Custom

engineering

your

equipment

works

exactly as

you

specify.

•

Critical

and

expedited

services

•

Leasing

Rentals/

Demos

• In

stock/

Ready-to-ship

•

!TAR-certified

secure

asset

solutions

Expert

team

ITrust

guarantee

100%

satisfaction

All

ademarks,

names, a

s a

earing here

are

e property of

pecti

ner

Find the National Instruments cRIO-9039 at our website: Click HERE

USER MANUAL

NI cRIO-9039

Embedded CompactRIO Controller with Real-Time Processor and

Reconfigurable FPGA

This document describes the features of the NI cRIO-9039 and NI cRIO-9039 Sync and

contains information about mounting and operating the device.

In this document, the NI cRIO-9039 and NI cRIO-9039 Sync are inclusively referred to as the

cRIO-9039.

For more information about timing and synchronization capabilities of NI cRIO-9039 Sync,

visit ni.com/info and enter the Info Code cRIO9039sync.

USB 2.0

Host Port

USB 2.0

Device Port

2 GB DDR3L

RJ-50

RS-232

Serial Port

RJ-50

RS-485/422 (DTE)

Serial Port

SD Card

Slot

Intel Atom

E3845 1.91 GHz Quad-Core

System-On-Chip

Xilinx

Kintex-7 FPGA

7K325T

RJ-45 Gigabit

Ethernet Port 2

RJ-45 Gigabit

Ethernet Port 1

16 GB SATA

Disk-On-Chip

cRIO-9039

Hardware

Data

C Series

Module

C Series

Module

Mini

DisplayPort

USB 2.0

Host Port

128 MB DDR3

Watchdog

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Contents

Configuring the cRIO-9039...................................................................................................... 2

Connecting the cRIO-9039 to the Host Computer or Network Using Ethernet............... 3

Configuring Startup Options.............................................................................................4

cRIO-9039 Features.................................................................................................................. 6

Ports and Connectors........................................................................................................ 6

Buttons............................................................................................................................ 14

LEDs............................................................................................................................... 16

Chassis Grounding Screw............................................................................................... 19

FPGA DRAM................................................................................................................. 20

Internal Real-Time Clock................................................................................................20

CMOS Battery.................................................................................................................20

File System......................................................................................................................20

Installing the Module Immobilization Accessory...................................................................21

Module Immobilization Accessory Dimensions.............................................................22

Mounting the cRIO-9039........................................................................................................ 23

Mounting Requirements..................................................................................................25

Dimensions......................................................................................................................26

Mounting the Device Directly on a Flat Surface............................................................ 27

Mounting the cRIO-9039 on a Panel.............................................................................. 29

Alternate Mounting Configurations................................................................................ 30

BIOS Configuration................................................................................................................ 33

Resetting the System CMOS and BIOS Settings............................................................33

Power-On Self Test Warning Messages.......................................................................... 34

BIOS Setup Utility.......................................................................................................... 34

Main Setup Menu............................................................................................................35

Advanced Setup Menu.................................................................................................... 36

Boot Setup Menu............................................................................................................ 37

Save & Exit Menu...........................................................................................................39

Worldwide Support and Services............................................................................................ 40

Configuring the cRIO-9039

You can connect the cRIO-9039 to a host computer or network and configure the startup

options using the USB device port or the RJ-45 Gigabit Ethernet port 1 or port 2.

Tip Refer to the getting started guide on ni.com/manuals for basic configuration

instructions and information about connecting to a host computer using the USB

device port. NI recommends using the USB device port for configuration, debug,

and maintenance.

2| ni.com | NI cRIO-9039 User Manual

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Connecting the cRIO-9039 to the Host Computer or

Network Using Ethernet

Complete the following steps to connect the cRIO-9039 to a host computer or Ethernet

network using the RJ-45 Gigabit Ethernet port 1. NI recommends using the RJ-45 Gigabit

Ethernet port 1 for communication with deployed systems.

Note You can configure the RJ-45 Gigabit Ethernet port 2 in Measurement &

Automation Explorer (MAX) under the Network Settings tab.

1. Power on the host computer or Ethernet hub.

2. Connect the RJ-45 Gigabit Ethernet port 1 on the cRIO-9039 to the host computer or

Ethernet hub using a standard Category 5 (CAT-5) or better shielded, twisted-pair

Ethernet cable.

Caution To prevent data loss and to maintain the integrity of your Ethernet

installation, do not use a cable longer than 100 m (328 ft).

The cRIO-9039 attempts to initiate a DHCP network connection the first time you

connect using Ethernet. The cRIO-9039 connects to the network with a link-local IP

address with the form 169.254.x.x if it is unable to initiate a DHCP connection.

Finding the cRIO-9039 on the Network (DHCP)

Complete the following steps to find the cRIO-9039 on a network using DHCP.

1. Disable secondary network interfaces on the host computer, such as a wireless access

card on a laptop.

2. Ensure that any anti-virus and firewall software running on the host computer allows

connections to the host computer.

Note MAX uses UDP 44525. Refer to the documentation of your firewall

software for information about configuring the firewall to allow communication

through the UDP 44525.

3. Launch MAX on the host computer.

4. Expand Remote Systems in the configuration tree and locate your system.

Tip MAX lists the system under the model number followed by the serial

number, such as NI-cRIO-9039-1856AAA.

Finding the cRIO-9039 on the Network (Static IP)

Complete the following steps to find the cRIO-9039 on the network if the host computer is

using a static IP address. The following instructions are for host computers running

Windows 7. For more information about performing the network configuration steps in this

section, visit www.microsoft.com and search for change tcp/ip settings.

1. Obtain IP settings from the host computer.

a) Click Start»Control Panel»Network and Sharing Center.

b) Select the primary network connection, which may appear as Local Area

Connection or something similar.

NI cRIO-9039 User Manual | © National Instruments | 3

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

c) In the dialog box that appears, click Properties.

d) Select Internet Protocol Version 4 (TCP/IPv4).

e) Click Properties.

f) Record the IP address, Subnet mask, and Default gateway address. You need

these settings to configure the network settings of the cRIO-9039 and to restore the

network settings of the host computer.

Tip You can also access these settings by opening the Start menu,

entering cmd.exe, and entering ipconfig in the command window that

launches.

g) Wait at least one minute.

2. Configure IP Settings on the controller in MAX.

a) Launch MAX on the host computer.

b) Expand Remote Systems in the configuration tree and locate your system.

Tip MAX lists the system under the model number followed by the serial

number, such as NI-cRIO-9039-1856AAA.

c) Select the Network Settings tab near the bottom of the window.

d) Select Static on the Configure IPv4 Address control.

e) Enter values for IPv4 Address, Subnet Mask, Gateway, and DNS Server based on

the information you recorded. Be sure to enter a value for IPv4 Address that is not

used by another device on the network. For example, do not use the IP address

usually assigned to the host computer.

f) Click Save and let MAX restart the cRIO-9039. The cRIO-9039 disappears from

under Remote Systems and does not reappear until you restore the original network

settings to the host computer.

g) Restore the original network settings to the host computer.

h) Return to MAX and refresh Remote Systems.

Configuring Startup Options

Complete the following steps to configure the cRIO-9039 startup options in MAX.

1. In MAX, expand your system under Remote Systems.

2. Select the Startup Settings tab to configure the startup settings.

cRIO-9039 Startup Options

You can configure the following cRIO-9039 startup options.

4| ni.com | NI cRIO-9039 User Manual

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table 1. cRIO-9039 Startup Options

Startup Option Description

Force Safe Mode Rebooting the cRIO-9039 with this setting on starts the cRIO-9039

without launching LabVIEW Real-Time or any startup applications. In

safe mode, the cRIO-9039 launches only the services necessary for

updating configuration and installing software.

Enable Console

Out

Rebooting the cRIO-9039 with this setting on redirects the console output

to the RS-232 serial port. You can use a serial-port terminal program to

read the IP address and firmware version of the cRIO-9039. Use a null-

modem cable to connect the RS-232 serial port to a computer. Make sure

that the serial-port terminal program is configured to the following

settings:

• 115,200 bits per second

• Eight data bits

• No parity

• One stop bit

• No flow control

Disable RT

Startup App

Rebooting the cRIO-9039 with this setting on prevents any LabVIEW

startup applications from running.

Disable FPGA

Startup App

Rebooting the cRIO-9039 with this setting on prevents autoloading of any

FPGA application.

Enable Secure

Shell (SSH)

Logins

Rebooting the cRIO-9039 with this setting on starts sshd on the

cRIO-9039. Starting sshd enables logins over SSH, an encrypted

communication protocol.

Note Visit ni.com/info and enter the Info Code openssh for

more information about SSH.

LabVIEW

Project Access

Rebooting the cRIO-9039 with this setting on enables you to add the

target to a LabVIEW project.

Enable

Embedded UI

Rebooting the cRIO-9039 with this setting on enables the embedded UI,

which allows you to interact with the front panels of VIs running on the

cRIO-9039 using input and display devices connected directly to the

cRIO-9039. You can also browse and edit files on the cRIO-9039 within a

graphical working environment. For more information, refer to the Using

the Embedded UI to Access RT Target VIs topic in the LabVIEW Help.

NI cRIO-9039 User Manual | © National Instruments | 5

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

cRIO-9039 Features

The cRIO-9039 provides the following features.

Ports and Connectors

The cRIO-9039 provides the following ports and connectors.

Figure 1. cRIO-9039 Ports and Connectors

1 2

456

1. RJ-45 Gigabit Ethernet Ports

2. Power Connector

3. SD Card Removable Storage

4. RS-232 Serial Port

5. RS-485/422 (DTE) Serial Port

6. Mini DisplayPort

7. USB Host Ports

8. USB Device Port

RJ-45 Gigabit Ethernet Ports

The cRIO-9039 has two tri-speed RJ-45 Gigabit Ethernet ports. By default, both Ethernet ports

are enabled and configured to obtain an IP address automatically. The Ethernet ports can be

configured in MAX.

The following table shows the pinout for the RJ-45 Gigabit Ethernet ports.

6| ni.com | NI cRIO-9039 User Manual

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table 2. RJ-45 Gigabit Ethernet Port Pinout

Fast Ethernet Signal Gigabit Ethernet Signal Pin Pinout

TX+ TX_A+ 1

TX- TX_A- 2

RX+ RX_B+ 3

No Connect TX_C+ 4

No Connect TX_C- 5

RX- RX_B- 6

No Connect RX_D+ 7

No Connect RX_D- 8

Note Both Ethernet ports perform automatic crossover configuration so you do not

need to use a crossover cable to connect to a host computer.

The following NI Ethernet cables are available for the cRIO-9039.

Table 3. RJ-45 Gigabit Ethernet Cables

Cables Length Part Number

CAT-5E Ethernet Cable, shielded 2 m 151733-02

5 m 151733-05

10 m 151733-10

Related Information

Ethernet LED Indicators on page 18

Power Connector

The cRIO-9039 has a power connector to which you can connect a primary and secondary

power supply. The following table shows the pinout for the power connector.

NI cRIO-9039 User Manual | © National Instruments | 7

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table 4. Power Connector Pinout

Pinout Pin Description

V1 Primary power input

C Common

V2 Secondary power input

C Common

Caution The C terminals are internally connected to each other, but are not

connected to chassis ground. This isolation is intended to prevent ground loops and

does not meet UL ratings for safety isolation. You can connect the C terminals to

chassis ground externally. Refer to the specifications on ni.com/manuals for

information about the power supply input range and maximum voltage from

terminal to chassis ground.

If you apply power to both the V1 and V2 inputs, the cRIO-9039 operates from the V1 input.

If the input voltage to V1 is insufficient, the cRIO-9039 operates from the V2 input.

The cRIO-9039 has reverse-voltage protection.

The following NI power supplies and accessories are available for the cRIO-9039.

Table 5. Power Accessories

Accessory Part Number

NI PS-15 Power Supply, 24 VDC, 5 A, 100-120/200-240 VAC Input 781093-01

NI PS-10 Desktop Power Supply, 24 VDC, 5 A, 100-120/200-240 VAC Input 782698-01

4-Position Gold Power Supply Plugs (Quantity 5) 783529-01

NI 9979 Strain Relief for 4-Position Power Connector 196939-01

Related Information

POWER LED Indicators on page 16

SD Card Removable Storage

The cRIO-9039 provides an SD card slot that can read from and write to NI-approved SD

cards.

8| ni.com | NI cRIO-9039 User Manual

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Caution You must use the SD card slot cover to protect the SD card in hazardous

locations.

Caution Do not insert or remove SD cards unless power has been switched off or

the area is known to be nonhazardous.

Note Using SD cards that are not approved by NI might invalidate specifications

and result in unreliable performance.

The following accessories are available for the SD card slot.

Table 6. cRIO-9039 SD Storage Accessories

SD Card Capacity Part Number

SD Industrial Storage Card 16 GB 783658-01

32 GB 783659-01

SD Door (x3) — 783660-01

Related Information

File System on page 20

SD Card Slot Cover

You must use the SD card slot cover to protect the SD card in hazardous locations. Do not

remove an SD card while either LED is flashing or lit because file corruption may result.

Note Screw the slot cover closed completely. Tighten the captive screws to a

maximum torque of 0.75 N · m (6.7 lb · in.) using a #1 Phillips screwdriver. Do not

overtighten.

RS-232 Serial Port

The cRIO-9039 has an RS-232 serial port that is implemented with an RJ-50, 10-position

modular jack to which you can connect devices such as displays or input devices. Use the

Serial VIs to read from and write to the serial port. Refer to the LabVIEW Help for information

about the Serial VIs.

Find examples on how to use NI-Serial or NI-VISA to perform serial communication in the

NI Example Finder. The NI Example Finder is located on the Help menu in the LabVIEW

Help.

Note The RS-232 serial port cannot be accessed by the user application when the

Console Out startup option is enabled.

The following table shows the pinout for the RS-232 serial port.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Andere Handbücher für cRIO-9039

Inhaltsverzeichnis

Andere National Instruments Controller Handbücher

National Instruments

National Instruments CompactRIO cRIO-9066 Bedienungsanleitung

National Instruments

National Instruments cRIO-9031 Bedienungsanleitung

National Instruments

National Instruments NI RMC-8355 Bedienungsanleitung

National Instruments

National Instruments sbRIO-9687 Bedienungsanleitung

National Instruments

National Instruments IC-3121 Bedienungsanleitung

National Instruments

National Instruments cRIO-9075 Bedienungsanleitung

National Instruments

National Instruments DAQ-STC Series Produkthandbuch

National Instruments

National Instruments PXIe-8100 Bedienungsanleitung

National Instruments

National Instruments IC-3121 Bedienungsanleitung

National Instruments

National Instruments CompactRIO cRIO-9035 Bedienungsanleitung

National Instruments

National Instruments FELDPoint FP-2000 Bedienungsanleitung

National Instruments

National Instruments CompactRIO cRIO-9035 Bedienungsanleitung

National Instruments

National Instruments CompactRIO cRIO-9025 Bedienungsanleitung

National Instruments

National Instruments cRIO-9023 Bedienungsanleitung

National Instruments

National Instruments Quanser QNET 2.0 Einrichtungshandbuch

National Instruments

National Instruments sbRIO-9629 Betriebsanleitung

National Instruments

National Instruments RMC-8354 Bedienungsanleitung

National Instruments

National Instruments 7932 Bedienungsanleitung

National Instruments

National Instruments CompactRIO cRIO-9002 Bedienungsanleitung

National Instruments

National Instruments PCI-7342 Bedienungsanleitung

National Instruments

National Instruments VXI-MXI-Express Series Bedienungsanleitung

National Instruments

National Instruments FieldPoint cFP-20 Series Bedienungsanleitung

National Instruments

National Instruments RT Series Bedienungsanleitung

National Instruments

National Instruments IC-3173 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

National Instruments cRIO-9039 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken