Current as of 2021-06-29
Instruction Manual for
Extension Ring 30/35/40/50/70 with
Focus knob
PN# 21230/21235/21240/21250/21270
ORE ORD
Thank you for your purchase of a NAUTICAM pro uct.
At NAUTICAM, we pri e ourselves in the ability to recognize the
requirements of professional as well as amateur un erwater
photographers an fulfill them through the innovative esigns of
our pro ucts. We strive to achieve a high level of user-
frien liness by allowing stress-free installation an easy operation
of all important functions of the camera.
Please rea this manual carefully before using the pro uct, this
will maximize its performance as well as its lifetime.
ARRANTY
All NAUTICAM Pro ucts are warrante against any material an
manufacturing efects for two years from the ate of purchase for
consumer use.
This warranty only applies to pro ucts purchase
from authorize NAUTICAM ealers an oes not exten beyon
the original retail purchaser.
To return your pro uct for service, please contact your regional
authorize service center(s). Please note that this warranty only
applies when the pro uct is purchase in the territory where the
service center is locate .
NAUTICAM oes not hol responsibility for amage, of any nature,
to any equipment use with an /or place within our pro ucts.
NAUTICAM accepts no liability for any loss of capture images or
the inability to capture images even if it is ue to the
malfunctioning of our pro ucts.
Unauthorize mo ifications an /or repairs of our pro ucts will
automatically invali ate the warranty.
Please follow the instructions below to mount the Extension Ring
on a port.
OUNT ON THE
ORT
Confirm that the Extension Ring 30
unlocke , with the locking lever pointing
upwar s as shown.
Align the "I" mark on the extension ring
with the WHITE ot on the port.
Gently push the extension ring towar s the
port until it cannot go any further.
Turn the extension ring clockwise until the
white ot on the extension ring aligns with
the white ot on the port.
Push the locking evice inwar s. Ensure
that the extension ring is securely locke
with the port
To unlock, release the locking evice an
reverse the above proce ures.
