Nauticam 86237 Bedienungsanleitung

Current as of 2022-7-11

INSTRUCTION MANUAL

for

FLOAT COLLAR FOR MWL-1

PN# 86237

FOREWORD

Thank you for your purchase of a NAUTICAM product.

At NAUTICAM, we pride ourselves in the ability to recognize

the requirements of professional as well as amateur underwa-

ter photographers and fulfill them through the innovative de-

signs of our products. We strive to achieve a high level of

user-friendliness by allowing stress-free installation and easy

operation of all important functions of the camera.

Each product is individually inspected and water pressure

tested to ensure optimum quality.

Please read this manual carefully before using the product,

this will maximize its performance as well as its lifetime.

Product illustration used in this manual may differ from actual

product.

Current as of 2022-7-11

WARRANTY

All NAUTICAM Housing Products and Viewfinders are war-

ranted against any material and manufacturing defects for

two years from the date of purchase for consumer use. NAU-

TICAM Optical Accessories are warranted against material

and manufacturing defects for a period of one year, and HDMI

cables carry a year warranty.

This warranty only applies to products purchased from author-

ized NAUTICAM dealers and does not extend beyond the orig-

inal retail purchaser.

To return your product for service, please contact your re-

gional authorized service center(s). Please note that this war-

ranty only applies when the product is purchased in the terri-

tory where the service center is located.

NAUTICAM does not hold responsibility for damage, of any

nature, to any equipment used with and/or placed within our

products.

NAUTICAM accepts no liability for any loss of captured im-

ages or the inability to capture images even if it is due to the

malfunctioning of our products.

Unauthorized modifications and/or repairs of our products

will automatically invalidate the warranty.

PRECAUTIONS

After installation of the port combo, please make sure the

O-ring (s) are free from debris and uneven surface issues.

A water-tight/vacuum test without the camera inside the

housing is highly recommended after the changing of port

and O-ring(s).

Do not use lubricants from other brands with the silicone

rubber O-ring on this housing, only use the lubricant pro-

vided by NAUTICAM.

Discontinue use immediately should you notice any leak-

age.

Do not open the product in a wet or sandy environment.

Protect the interior from moisture and debris in order to

prevent malfunction or leakage.

Defective products should be shipped to our distributors

for service, unauthorized disassembling and/or modifica-

tions could result in malfunction or leakage.

Do not travel by air with the port sealed to the housing.

Current as of 2022-7-11

SPECIFICATIONS

Outer diameter x Length

DIA160 mm x 67 mm

Weight in air

1,538g (incl.MWL-1)

Buoyancy in water

Negative 60g (incl.MWL-1)

Body construction

Hard-anodized aluminum alloy

Depth rating

100m

Compatible lens

86201 Macro to Wideangle

Lens 1 (MWL-1) 150 deg. FOV

with full frame 60mm macro

lens

CARE AND MAINTENANCE

Soak the product in fresh water after each salt water use

After each day of diving, it is advisable to have both the

housing main O-ring and port O-ring removed from its

groove with the O-ring remover and inspected for damage.

Also check that the O-ring retains its original circular shape;

never stretch the O-ring excessively or remove it with a

sharp object. The O-ring groove should be cleaned to en-

sure it is free from any salt deposit or foreign material;

lightly coat the O-ring with the provided lubricant before re-

installing it in the groove. A damaged O-ring should be dis-

carded immediately and replaced only with one that is pro-

vided by NAUTICAM.

Please refer to "Nauticam Product Care and Maintenance

Guide" for more details.

Current as of 2022-7-11

IDENTIFICATION OF PARTS

PREPARATION OF THE PRODUCT

1. After verifying that the sealing silicon O-ring is in good con-

dition, lightly coat it with the lubricant provided and wipe

away the excess.

2. Make sure the O-ring groove is free from any foreign mate-

rial; the groove can be cleaned with the aid of a microfiber

cloth.

3. Carefully place the port O-ring into the groove, ensuring that

it lays flat and inside the entire groove.

4. Inspect the O-ring again, make sure there is no lint or hair

on the O-ring

5. Lift up the entire system and inspect where the housing

back and port meet the housing. There should be a thin, uni-

form gap with no extruded O-ring.

Float collar

4x thumb screws

Shade

Shade cover ring

Shade base ring

Base fixing ring

Lens cap

4x M3 screws

Current as of 2022-7-11

PREPARATION BEFORE INSTALLING 86237

2. Then, remove the lens shade, 2x shade fixing ring

pieces, and bayonet mount ring as shown above.

1. Unscrew 4x screws from a shade of MWL-1and 7x

screws from bayonet mount ring of MWL-1

Current as of 2022-7-11

INSTALLING 86237 ON MWL-1

1. Mount shade base ring on MWL-1 as shown above.

Make sure the two O-rings as shown in blue into the

groove, ensuring that it lays flat and inside the entire

groove.

2. Gently push the shade base ring downwards to fit on the

MWL-1 as shown above.

MWL-1

Current as of 2022-7-11

4. Tighten them by using 4x thumb screws.

3. Mount base fixing ring under the shade base ring as

shown above.

Current as of 2022-7-11

6. Place the MWL-1 downward, and install the float collar

as shown above. Gently push the float collar towards

the MWL-1 until it cannot go any further.

Make sure the O-ring of the float collar as shown in blue

into the groove, ensuring that it lays flat and inside the

entire groove.

5. Mount a shade of 86237 as shown above.

Current as of 2022-7-11

7. Re-attach the bayonet mount ring of the MWL-1

as shown above

If 86221/86222 Flip holder for MWL-1 is needed,

attach the M67 adaptor ring of 86221/86222 in-

stead.

8. And tighten with 7x screws of the bayonet

mount ring.

Current as of 2022-7-11

9. Mount the shade cover ring on the shade as shown

above.

And after turn the shade to a desired location, tighten

it with 4 x M3 screws provided

To un-mount the float collar from the lens, reverse the

above steps.

Inhaltsverzeichnis

Andere Nauticam Kamerazubehör Handbücher

Nauticam

Nauticam N100 X1024-Z Bedienungsanleitung

Nauticam

Nauticam 16346 Bedienungsanleitung

Nauticam

Nauticam NZ2875-Z Zoom Gear Bedienungsanleitung

Nauticam

Nauticam N1855AFP-Z Bedienungsanleitung

Nauticam

Nauticam RC1022-F Bedienungsanleitung

Nauticam

Nauticam 19561 Bedienungsanleitung

Nauticam

Nauticam 87501 Bedienungsanleitung

Nauticam

Nauticam NA-LX10 Bedienungsanleitung

Nauticam

Nauticam 36207 Bedienungsanleitung

Nauticam

Nauticam NA-G7X Bedienungsanleitung

Nauticam

Nauticam N50 Short Port 17 with Bayonet Mount Bedienungsanleitung

Nauticam

Nauticam 25101 Bedienungsanleitung

Nauticam

Nauticam NA-GH5 Bedienungsanleitung

Nauticam

Nauticam NA - R5C Bedienungsanleitung

Nauticam

Nauticam 36060 Bedienungsanleitung

Nauticam

Nauticam 37169 SFE28135-Z Bedienungsanleitung

Nauticam

Nauticam 36315 Bedienungsanleitung

Nauticam

Nauticam NA-G9 Bedienungsanleitung

Nauticam

Nauticam NA-D7200 Bedienungsanleitung

Nauticam

Nauticam N120 Bedienungsanleitung

Nauticam

Nauticam NA-A7II Bedienungsanleitung

Nauticam

Nauticam NA-EM5II Bedienungsanleitung

Nauticam

Nauticam NA-D90 Bedienungsanleitung

Nauticam

Nauticam NA - R3 Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung