Navpixel NPD0835 Bedienungsanleitung
www.navpixel.com
NPD0835
8F-2, No.133,Lane 235,Pao-chiao Rd.,Hsin-tien City, Taipei County, 231,Taiwan
Tel:+886-2-8919-1858 /Fax:+886-2-8919-1300
USER MANUAL
8.4"
(1st Edition9/8/2008)
All informationis subjectto changewithout notice.
IP-68Touch Monitors
Sunlight Readable LED B/LLCD
Record of Revision
Version and Date Page Old Description New Description Remark
Sep.8 2008 30 Preliminary Release
Page 2
Table of Content
Record of Revision............................................................................................................ 2
Table of Content................................................................................................................ 3
Usage Notice..................................................................................................................... 4
1.0 Introduction ................................................................................................................. 5
2.0 Safety.......................................................................................................................... 6
3.0 Product Care and Maintenance................................................................................... 8
4.0 Packaging Contents.................................................................................................. 10
5.0 Cable Connections.....................................................................................................11
6.0 Installation................................................................................................................. 13
7.0 Display Controls........................................................................................................ 22
8.0 OSD Menu & Screen Adjustment.............................................................................. 23
9.0 Video Input PinAssignment ...................................................................................... 28
10.0 Display Timing......................................................................................................... 29
11.0 Display Outline Dimensions..................................................................................... 30
Page 3
Usage Notice
01. To reduce the risk of electric shock, do not remove the cover or
back.There are no user-serviceable parts inside.
02. Make sure you turn off and unplug the the display before installing
devices.
WARNING!
Precautions
To maximize the life and safe use of your unit, always be sure to follow the warnings,
precautions and maintenance recommendations in this user’s guide.
In a Watercraft or Vehicle:
zThe monitor should be visible to the driver only if it is used for navigation, or system
control. Care should be taken to ensure distraction does not occur.
zReview all applicable federal, state and local laws and regulations to make sure the
monitor is used properly and safely.
zAvoid using the monitor for extended times while the charging system is not running,
or the monitor could drain the watercraft’s battery.
Cleaning the Monitor:
zUse a soft cloth moistened with mild detergent, isopropyl alcohol, or window cleaners
to clean the display housing.
zNever use abrasive cleaners, waxes or solvents to clean the unit.
Page 4
1.0 Introduction
1.1 About
NavPixel™
T
ouch Monitors
NavPixel™ NPD0835, the high-performance, rugged touch monitor, is specially
engineered to survive the most demanding applications. You will soon become familiar
with the quality difference in this bright sunlight readable (0.5 to 1,000 nits) monitor.
The NavPixel™NPD0835 sunlight readable monitor handles a wide-range of extreme
environments making it the industry choice for mobile applications. Housed in a milled
billet aluminum case, the slim-profile NavPixel™NPD0835 is light weight and watertight,
with fully sealed IP68 connectors. Front-mounted controls and the touch screen make the
industrial rugged monitor user-friendly. We have incorporated the latest optical
engineering to achieve optimal viewability in all lighting conditions, including direct
sunlight. The NavPixel™NPD0835’s power efficient, low heat design results in increased
reliability and longevity required for mission critical deployment.
1.2 Features
z1000 Nits Sunlight Readable Touch Monitor
zLong Life, Low Power Consumption LED backlight.
z-40ºC ~ 60ºC Wide Temperature
zUltra Wide Viewing Angle : (H) +65°~ -65°, (V) +60°~ -55°
zAdvanced Optical Bonding (AOT) Powered by OptiBond™ Technology
zHigh Shock & Vibration Resistance
zIR Touch
zIP-68 Waterproof, Completely Sealed,
z8-36 V DC Input
zFanless Design
1.3 Application:
zOutdoor Display
zGas & Oil equipment
zMarine
zTruck and Car Transportation
zMining
zAnd more
Page 5
2.0 Safety
General Safety Instructions
• Before operating the NavPIxel™ NPD0835 Monitor, read this User Manual thoroughly
• Keep this User Manual for future use
• Verify the computer system capability (see Packaging Contents & Installation) to insure
operation of the Monitor
• For expeditious installation, follow these User Manual instructions in sequence
• Adhere to all Caution and Warnings on system and as stated in this User Manual
Shock Hazards
This icon is intended to tell the User of a potential risk of electrical shock.
Instructional
This icon is intended to tell the User of important operating and/or
maintenance instructions.
WARNING!
CAUTION!
• User Manual instructions for installation and operation should be followed precisely
• Adjust only those controls covered by the User Manual’s operating instructions; improper
adjustment of other controls voids the unit’s warranty and may result in unit damage, and
• Adhere to local installation codes.
General Unit Safety
• Always disconnect the unit from the power source before cleaning
• Do not operate the unit with a damaged cord
• Do not operate if the unit has been dropped or damaged. The unit should be inspected
by our qualified Service Personnel
• Position the power cord so it is not in contact with hot surfaces
• Do not allow anything to rest on the power cord, and
• Do not place the power cord in the path of foot traffic.
General Safety Precautions
．Power cord must be connected to a properly wired and grounded power
source
．Any equipment to which the unit is attached must also be connected to
properly wired and grounded power sources
．Do not connect or disconnect the unit during an electrical storm
．Do not remove the unit covers ? there are no user serviceable parts in
the unit
．Do not disassemble or modify the unit to avoid the possibility of electrical
shock, damage to electrical components or scratching the display
surface, and disassembly of the unit voids the warranty.
WARNING!
Page 6
Electrical
Connecting Cables
• Disconnect the power to the computer when the Monitor is being installed, and
• Upon installation, verify the power connector is securely seated on the unit.
Power Source
This unit may be operated from an AC (optional) or DC (standard) power source.
• Use the supplied power cable, and
• Always connect to a properly grounded power source.
EMI / RFI
This product has been engineered to meet or exceed international industry
standards addressing product design and enclosure protection against
EMI/RFI when installed with the factory provided cables
CAUTION!
Protection on Servicing
Servicing - User
• User product servicing is limited to cleaning the unit
• Do not disassemble or modify the unit to avoid the possibility of electrical shock, damage
to its electrical components or scratching the display surface, and
• Disassembly voids the warranty.
Servicing – NavPixel™
Qualified Service Personnel may be required if the unit:
• Does not operate normally when installation instructions are followed
• Does not operate normally when operating instructions are followed
• Has been dropped or damaged, or
• Exhibits a distinct change in performance, indicating a need for service.
Shipping
If the unit should need to be shipped to the Service Center or local dealer, the original
packing material should be used to insure safety of the unit in shipping. Repack the unit as
it would have originally been received from us.
Page 7
3.0 Product Care and Maintenance
Product Care
This NavPixel™ Monitor has been designed to provide optimum performance and service
without any required scheduled maintenance other than occasional cleaning.
Disconnect the Monitor from the power source before cleaning the Monitor,
Touch Screen or unit’s enclosure.
Do not use abrasive cleaners or solvent-based (flammable) cleaners on the
Flat Panel or Touch Screen Display, its enclosure or any other electrical
device (cables, power cord, etc)
．Do not use paper products as they may scratch the display screen, and
．Do not directly apply cleaning solutions to the display screen.
WARNING!
CAUTION!
Display Screen Cleaning
• A vinegar-based cleaner is preferred to prevent streaking and degradation of the
coatings, or
• A non-abrasive glass cleaner such as a professional foam glass cleaner
• Apply the cleaning solution to a soft clean cloth, dampening slightly
• Keep a fresh side of the cleaning cloth towards the screen surface to avoid scratching it
with accumulated grit, and
• To minimize the risk of abrasion to the screen, air drying is recommended.
Touch Screen
Touch Screen Cleaning
• Use a special screen cleaning tissue or a solution specifically antistatic coatings. Follow
the manufacturer’s instructions,
• Lightly dampen a soft clean cloth with water or a general detergent solution
• Keep a fresh side of the cleaning cloth towards the screen scratching it with accumulated
grit, and
• To minimize the risk of abrasion to the screen, air drying
Monitor Enclosure
• Clean the unit enclosure with a soft clean cloth lightly dampened purpose mild detergent
solution
• To rinse, wipe down with clean water, and
• Dry with a soft clean cloth.
Long-term Storage
• For long-term storage, it is suggested the unit be stored in a normal indoor environment
and the display glass be protected from accidental damage
• For pedestal mount units, disconnect the cable(s) and loosen the arm adjustment to a
point where the ball can be removed from the arm, or
• For Flush or Panel Mount units, cover the product with a protective covering that will not
scratch or transfer any dyes to the display screen.
Page 8
Maintenance
Power Cord
To avoid shock and fire hazards, replaced the unit’s power cord if:
．Insulation becomes damaged, or
．Aloose connection is suspected.
WARNING!
Other Maintenance
Only Qualified Service Personnel should perform all other maintenance except for
cleaning and the power cord replacement described above.
Page 9
4.0 Packaging Contents
The NavPixel™NPD0835 is shipped in a box with PE foam packaging. It is recommended
the installer save the box and all packaging materials in case the unit would need to be
returned to the Service Center or local dealer. (Figure 1)
One NavPixel™ NPD0835 unit
Fully sealed IP-68 VGA connector cable
Fully sealed IP-68 USB connector cable
User CD with touch screen driver and user manual
AC Power Cable (Option)
AC Power Adapter (Option)
(Figure 1)
Page 10
Inhaltsverzeichnis
Beliebte Touch-Screen Handbücher anderer Marken
Elecro Engineering
Elecro Engineering Poolsmart Plus Montageanleitung
Johnson Controls
Johnson Controls IQ4 HUB Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems ET2270L Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems ET1002L Bedienungsanleitung
Elo TouchSystems
Elo TouchSystems 3201L Bedienungsanleitung
Duratec
Duratec S15 Bedienungsanleitung
