Nds surgical imaging Dome GX2MP Plus Bedienungsanleitung
ii
©2011 NDS Surgical Imaging, LLC. All rights reserved.
Information in this document has been carefully checked for accuracy; however,
no guarantee is given to the correctness of the contents. This document is subject to
change without notice. Go to web site www.ndssi.com for the latest documentation.
NDSsi provides this information as reference only. Reference to products from other
vendors does not imply any recommendation or endorsement.
This document contains proprietary information protected by copyright. No part of
this manual may be reproduced by any mechanical, electronic, or other means, in
any form, without prior written permission of NDSsi.
NDS Surgical Imaging, NDSsi, the NDSsi logo, Dome, the Dome by NDSsi logo,
Dome GX2MP, Dome CXtra, and DICal are either registered or unregistered
trademarks of NDS Surgical Imaging. All other trademarks are the property of
their respective owners.
020-0908-00B
iv | Dome GX2MP Plus
Product Information
The design of the Dome GX2MP Plus display takes into account every
known measure to ensure your personal safety. Improper use of the
display can result in electric shock, fire, or damage to components.
Read all instructions before setting up the display, and observe the
safety precautions listed.
Symbol explanations
CAUTION. Read the accompanying text carefully, for
proper operation and maintenance of the display
system.
DANGEROUS VOLTAGE. Important precautions about
electric shock. Read the accompanying text carefully, to
prevent damage to components of the display system
and for your safety.
DIRECT CURRENT.
BAROMETRIC PRESSURE. Transport and storage
12,000 meters (39,400 feet), maximum in unpressurized
container.
RELATIVE HUMIDITY. Transport and storage 10% to 90%
(noncondensing).
TEMPERATURE. Transport and storage -20° to 60° C.
Product Information | v
Safety precautions
• Use only the power cord shipped with the unit. If the power cable is faulty
in any way, speak with your account representative for resolution.
• The power supply cord serves as the primary disconnection device. Make
sure a grounded AC outlet is within easy reach of the installation location.
• Operate the display only from a power source indicated by the display
specifications.
• Never open the display case, even when the power is off. Dangerous high
voltage inside may cause electric shock or death.
• To avoid damage to the display, use the grounded power supply and video
cable supplied by Dome, or use certified replacements.
• Be sure the display is electrically grounded. You must connect the third
grounding pin on the US power cord to a grounded outlet. The European
power cord does not have a third grounding pin, but it must be plugged
into a grounded outlet.
• Avoid using overloaded AC outlets, extension cords, frayed power cords, or
broken plugs.
• If you cannot insert the plug into the outlet you plan to use, have a licensed
electrician replace the outlet with a properly grounded outlet. If the power
cord connects directly into the computer, make sure the computer is
grounded.
• Call or e-mail Dome technical support when the display is not operating
properly.
• Keep the display dry in all instances. The display lacks protection against
liquids or spills.
•In locations where 240V outlets are used, connect the display to
a center-tapped, 240V, single-phase supply only (for Canada and
the United States).
vi | Dome GX2MP Plus
Unpacking and handling tips
The Dome GX2MP Plus display requires proper care to maintain product
operation and adherence to specification. Unpack the display and
components carefully, then set up and handle the unit properly to avoid
damage to the LCD panel.
• Use both hands to grasp the display case when lifting it from the shipping
carton, but avoid touching the screen.
• Do not apply pressure to the screen or touch the screen with bare fingers
or objects. Pressure can affect image quality. Cosmetics and oils on the skin
are both detrimental to the screen and difficult to remove.
• Allow the display to warm up to room temperature before turning it on.
Avoid sudden temperature changes in the environment, as this may cause
condensation, which damages the display.
• Secure the display properly onto a standard VESA 100-mm mounting unit
if you elect not to use the desk stand.
• Do not place the display on a sloping shelf unless it is properly secured.
• Do not set up the display near strong light or heat sources.
• Do not block the vents on the back of the display or install the display in
a built-in enclosure. Blocked vents cause excessive heat to build up inside
the display, increasing risk of fire.
• When installing components, turn off your computer, but leave it plugged
into a grounded outlet.
• Do not remove the back cover or disassemble the display. There are
no user-serviceable parts inside.
Preventing fire and injury
• Replace the power supply cord or video cables if damaged.
• Use only the power source indicated in this guide or listed on the display.
• Do not plug the power supply into an overloaded AC outlet or extension
cord. Overloaded AC outlets and cords can result in electric shock or fire.
• Do not drop or push objects into the display case. Internal components
contain high voltage.
• Unplug the power cord from the wall outlet during thunderstorms.
• Do not place magnetic devices, such as motors, near the display.
• Always turn off the display when it will not be in use for more than
a short period of time.
• Do not add accessories that have not been designed for use with
this display.
Product Information | vii
Cleaning the display
• Unplug the power supply before cleaning the display or LCD screen.
• Use a slightly damp (not wet) clean, lint-free cloth to clean the display.
• Dampen a clean cloth with a small amount of isopropyl alcohol to remove
glue or dust if the screen is still not clean. Do not saturate the cloth;
otherwise, the liquid may seep into the display case and collect in the
enclosure. Use a clean, dry cloth to completely remove wet residue.
• Do not use chemically treated dust cloths, acetone, toluene, or harsh
solvents on the display case or the screen.
• Do not expose the display to water or excessive moisture. Do not allow
water or other stains to stand on the unit. Wipe liquids off immediately to
prevent damage to the display case and the screen.
• Do not use aerosol directly on the display screen. Overspraying may cause
electric shock.
Shipping/storing the display
Keep the display in its shipping container until installation. Return the display
to its original container whenever you need to store the unit, move it to
another location, or return it for repair. The packaging supplied by the
manufacturer protects the display while it is in transit. See environment
specifications for more information.
Before returning the display to the container, do the following:
1 Swivel the display panel to landscape mode.
2 Push the panel down to the lowest position.
3 Use the stand lock to anchor the panel.
Disposal information
Follow your local governing ordinance and recycling policy for
proper disposal or recycling of display components.
WARNING
DISCONNECT SUPPLY BEFORE SERVICING
AVERTISSEMENT
COUPER L’ALIMENTATION AVANT L’ENTRETIEN ET LE DEPANNAGE
viii | Dome GX2MP Plus
* The Quadro NVS 300 board (x16 or 1x) ships with a DMS59 to DVI-I cable adapter
supporting two single link DVI connections.
Dome GX2MP Plus display mounted on desk stand
Display controller* DVI cable Power cord
Quick reference
Display driver and
calibration software
About the Display | 1
About the Display
The Dome GX2MP Plus color display system, using Active Matrix
Liquid Crystal Display, or AMLCD, technology, is a cost-effective,
general-purpose unit. You can view images in portrait or landscape
resolutions of up to 1600 x 1200 pixels (UXGA). The complete system
consists of the LCD panel, display controller, and display driver.
The display panel can show 8-bit color data per subpixel (24-bits per
pixel) from a palette of 256 values, implementing gamma correction
via the video card for a maximum presentation of 16.7 million colors.
The Dome GX2MP Plus display includes a backlight stabilization, or
BLS, feature that maintains 185 cd/m2luminance with an internal
backlight sensor.
Bundled with the display system, the Dome CXtra software enhances
the functionality of the Dome GX2MP Plus display with a range of
value-added services, such as DICOM calibration, error reporting, and
backlight saver. Network management of Dome GX2MP Plus displays
running the Dome CXtra software requires the Enterprise
Management Service for Dome CXtra. For more information,
refer to Dome CXtra User’s Guide.
System Requirements
• Intel or AMD multi-core processor
• PCI Express x16 or x1 lane slot
• 50 MB hard disk space
•256MBRAM
•CD-ROMdrive
• Windows 7 or Windows XP Service Pack 3
2 | Dome GX2MP Plus
Display Components
Onscreen menu controls, power control, and display status indicator
are located on the front of the unit, lower right.
The onscreen menu allows you to make adjustments to display
settings such as brightness, contrast, position, and language. See
“Using Display Controls” on page 11 for more information.
The light-emitting diode, or LED, indicates display status as follows.
• Blue. The display is connected and running properly.
• Amber. The display is in Sleep (power-saving) mode, or the video
signal is not being received.
Improper cable connections could cause no image to appear on the
display screen or the LED to glow amber. See “Troubleshooting” on
page 16 for more information.
Legend
1 Onscreen menu controls. Adjust display settings.
2 Power button. Powers display ON or OFF.
3 Power indicator. Reports display status.
1
23
Inhaltsverzeichnis
Andere Nds surgical imaging Monitor Handbücher
Nds surgical imaging
Nds surgical imaging Dome E2 Bedienungsanleitung
Nds surgical imaging
Nds surgical imaging Dome GX2MP Bedienungsanleitung
Nds surgical imaging
Nds surgical imaging Dome Ex Bedienungsanleitung
Nds surgical imaging
Nds surgical imaging Radiance Series Bedienungsanleitung
Nds surgical imaging
Nds surgical imaging Dome E2c Bedienungsanleitung
