2. CHARACTERISTICS:
Product photos in this manual are for reference only and with the purpose of
explanation; the product you have purchased may be different.
This automatic device in the standard version is used to charge the service battery
12V (lead acid, GEL, AGM or Lithium) from photovoltaic panels with a nominal
voltage of 12V.
Always keep the manual at hand and close to the device for easy reference on
essential safety information, use and maintenance.
The information on this manual may change without any notice.
NDS Energy reserves the right to make changes and improvements to the product at
any time without any notice or obligation to apply these changes to the devices
previously distributed.
SC300M (main characteristics):
–Allows the charge of the service battery, using solar panels with a nominal
voltage of 12V.
–Has two separate inputs for two solar panels of maximum power up to 150Wp
for each, with a nominal voltage of 12V.
–The system has two outputs, one for the service battery and one for the starter
battery, allowing a maintenance charge also on the starter battery.
–Operating Status indication via 2 LEDs (green and yellow), one indicates the
charge of the service battery and one indicates the charge of the starter battery.
The LEDs flash to indicate the charging phase of the device.
–Selector composed of three jumpers, to choose the proper charging curve
according to the type of battery.
–Designed to be connected to the touch screen display, in order to monitor the
charging data and set automatically the charging curve.
3
