Neat Bar Pro Bedienungsanleitung

Neat Bar Pro & Neat Pad

User Manual

Neat Bar Pro

Video conferencing device

Neat Bar Pro packs a stack of tech

into a simple and elegant slimline

device.

It’s capable of driving three large

screens, has two extreme resolution

cameras, a multiple microphone array

and three full-range speakers.

Ideal for delivering superior-quality

audio, video, and other unique

capabilities to your huddle, focus,

meeting, and conference rooms,

Neat Bar Pro comes with a

dedicated Neat Pad controller and

integrated environmental sensors.

Simple

setup

All you need is in the box,

including mounts, cables

and clear instructions. So

it’s easy for anyone to

install and set-up, above or

below one, two or three

screens.

Wall mount

Screen mount

Table stand

Neat Bar Pro

Neat Bar comes with

everything you need to get

started, including cables,

wall mount, screen mount

and table stand.

In the box

Neat Bar Pro: Video conferencing

device

HDMI cable: 6.5t (2m)

Ethernet cable: 9.8t (3m)

Power cord: 9.8t (3m)

Mount adapter, wall mount, screen

mount and table stand

Screws for mounting to the wall are not included. Mounting on a wall should only be performed

by qualiﬁed personnel in line with applicable facility and state regulations. The wall and the

mounting equipment must safely withstand the load of the product.

Neat Bar ProMount adapterTable standScreen

mount

Wall mount

Slide the selected

bracket onto the

mount adapter

and secure with

the hex wrench.

4 × M screw (0.94 in / 24 mm) for VESA mount

4 × M screw (0.94 in / 24 mm) for VESA mount

2 × spacer (to secure parallel TV mount)

1 × 5 mm hex key for the screen mount

1 × 2 mm hex key for the mount adapter

2 additional screw bags for dual or triple screen setup

4 × M screw (0.94 in / 24 mm) for VESA mount

2 × 4 × M screw (0.94 in / 24 mm) for VESA mount

4 × spacer (to secure alignment of all screens)

Neat Pad

Screws for mounting to the wall are not included. Mounting on a wall should only be performed

by qualiﬁed personnel in line with applicable facility and state regulations. The wall and the

mounting equipment must safely withstand the load of the product.

Neat Pad works as a Controller for Neat

Bar and can also be conﬁgured as a

Scheduling Display for the Meeting

Room. It comes with everything you need

to get started, including cables and

mounting options.

In the box

Hook the mount

adapter onto the

wall mount and

secure with the

hex wrench.

Wall mountSide mount Mount adapter Neat Pad

Neat Pad: 8-inch touch screen

2 × Ethernet cable: 9.8t (3m) + 16.4t (5m)

PoE power adapter

Mount adapter, side mount and wall mount

4 × M screw (0.30 in / 7.5 mm)

for the wall mount

3 × M screw (0.19 in / 4.7 mm)

for the side mount

1 × 2.5 mm hex key for the adapters

1 × 2 mm hex key to secure Neat Pad

to the wall mount

Mounting & releasing

Mounting

Slide Neat Bar onto the

selected mounting

option (1). When fully

inserted tilt Neat Bar

back to horizontal and

check if it is secure by

carefully pulling it

towards you.

Releasing

Tilt Neat Bar fully

forward (1). Pull towards

you (2) until the unit

stops and the red

release lever appears

(3). Push the release

lever up and pull Neat

Bar gently of the

mount adapter.

Size & weight

Neat Bar Pro

Neat Pad

35.04 in (890 mm)

3.15 in

(80 mm)

3.15 in

(80 mm)

7.8 in (198 mm)

5 in

(127 mm)

1.7 in

(42 mm)

Width: 35.04 in (890 mm)

Height: 3.15 in (80 mm)

Depth: 3.15 in (80 mm)

Weight: 6.83 pounds (3.1 kg)

Width: 7.8 in (198 mm)

Height: 1.7 in (42 mm)

Depth: 5 in (127 mm)

Weight: 1.15 pounds (520 g)

Setup & connectivity

Setup

Use the provided cables to set up Neat Bar.

Connect the cables according to the illustration.

Cables marked are included. Cables marked

are optional and not required for basic use of

the system.

Requirements for

a complete setup

Display

Internet connection

Video service

Environmental Requirements

Ambient operating temperature:

32° to 95° F (0° - 35° C)

Storage temperature: -4° - 140° F (-20° - 60° C)

Relative humidity: 10% to 90%

Network standby: <W (ater 20 minutes)

Additional Product

Information

htps://neat.no/bar-pro

Neat Bar Pro and Neat Pad - User Manual rev06

AC power

9.8t (3m) Cable

Auxillary port (RJ)

USB-C Debug

Ethernet port

16.4t (5m) Cable

Factory reset buton

Power over Ethernet

(PoE)

Power adapter for AC

Factory reset buton

USB-C

HDMI-out for external screen

The 16.4t (5m) Ethernet

Cable provided is not to

be used for in-wall

installation. In-wall cable

routing should only be

performed by qualiﬁed

personnel using

appropriate equipment.

Security lock slot

WiFi

HDMI-out for external screen

Ethernet port

9.8t (3m) Cable

HDMI-in for screen sharing

HDMI-out for external screen

6.5t (2m) Cable

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Neat Konferenzsystem Handbücher

Neat

Neat Bar Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung