NEC DT 2000 Bedienungsanleitung

Digital Talk 2000

Owner's Manual

ATTENTION

Before Using the Phone:

It is necessary that you fully CHARGE the phone battery

before attempting to make or receive a call.

Battery Disposal:

DO NOT PLACE USED BATTERIES IN YOUR REGULAR

TRASH. THIS NICKEL-CADMIUM (Ni-Cd) BATTERY MUST

BE COLLECTED, RECYCLED OR DISPOSED OF IN AN

ENVIRONMENTALLY SOUND MANNER.

Battery Recommendations:

The NEC Digital Talk 2000 Series IS-136 TDMA cellular phone

you have purchased is designed to deliver quality

performance and provide you with years of use. To maintain

optimum performance, NEC recommends only using NEC

Authentic Accessories with all NEC cellular phones.

The incineration, landfilling, or mixing of nickel-cadmium

(Ni-Cd) batteries with any municipal solid waste stream is

PROHIBITED BY LAW in most areas.

Return this battery to a federal or state approved nickel-

cadmium (or “sealed lead”) battery recycler. This may be

where you purchased the battery or a local seller of

automotive batteries. In all states, call 1-800-637-5917, except

Minnesota, if further disposal information is required. In

Minnesota, call 1-800-225-PRBA.

Contact local waste management officials for other information

regarding the environmentally sound collection, recycling and

disposal of this battery.

Hands-Free Adapter:

NEC does not recommend using a hands-free adapter

with the Digital Talk 2000 Series portable cellular

telephone.

IMPORTANT

READ THIS INFORMATION BEFORE

USING YOUR HAND-HELD PORTABLE

CELLULAR TELEPHONE

First introduced in 1984, the hand-held portable cellular

telephone is one of the most exciting and innovative electronic

products ever developed. With it you can stay in contact with

your office, your home, emergency services, and others.

For the safe and efficient operation of your phone,

observe these guidelines.

Your cellular telephone is a radio transmitter and receiver.

When it is ON, it receives and also sends out radio frequency

(RF) energy. The phone operates in the frequency range of

824 MHz to 894 MHz and employs commonly used frequency

modulation (FM) techniques. When you use your phone, the

cellular system handling your call controls the power level at

which your phone transmits. The power level can range from

0.006 of a watt to 0.6 of a watt.

Exposure to Radio Frequency Energy

In 1991 the Institute of Electrical and Electronics Engineers

(IEEE), and in 1992 the American National Standards Institute

(ANSI) updated the 1982 ANSI Standard for safety levels with

respect to human exposure to RF energy. Approximately 120

scientists, engineers, and physicians from universities,

government health agencies, and industry, after reviewing the

available body of research, developed this updated Standard.

In March, 1993, the Federal Communications Commission

(FCC) proposed the adoption of this updated Standard.

The design of your phone complies with this updated

Standard. Of course, if you want to limit RF exposure even

further than the updated ANSI Standard, you may choose to

control the duration of your calls and operate your phone in

the most power efficient manner.

Efficient Phone Operation

For your phone to operate at the lowest power level,

consistent with satisfactory call quality, please observe the

following guidelines:

If your phone has an extendable antenna, extend it fully.

Some models allow you to place a call with the antenna

retracted. However, your phone operates more efficiently with

the antenna fully extended.

Hold the phone as you would any other telephone. While

speaking directly into the mouthpiece, position the antenna up

and over your shoulder. Do not hold the antenna when the

phone is "IN USE". Holding the antenna affects call quality

and may cause the phone to operate at a higher power level

than needed.

Antenna Care and Replacement

Do not use the phone with a damaged antenna. If a damaged

antenna comes into contact with the skin, a minor burn may

result. Replace a damaged antenna immediately. Consult

your manual to see if you may change the antenna yourself. If

so, use only a manufacturer-approved antenna. Otherwise,

take your phone to a qualified service center for repair.

Use only the supplied or approved antenna. Non-approved

antennas, modifications, or attachments could impair call

quality, damage the phone, and violate FCC regulations.

Driving

Check the laws and regulations on the use of cellular

telephones in the areas where you drive. Always obey them.

When using your phone while driving, please:

* give full attention to driving, and

* pull off the road and park before making or

answering a call if driving conditions so require.

Hearing Aids

Some digital wireless phones may interfere with some hearing

aids. In the event of such interference, you may want to

consult your service provider [ or call the customer service line

to discuss alternatives.]

Electronic Devices

Most modern electronic equipment is shielded from RF

energy. However, RF energy from cellular telephones may

affect inadequately shielded electronic equipment.

iii

RF energy may affect improperly installed or inadequately

shielded electronic operating and entertainment systems in

motor vehicles. Check with the manufacturer or its

representative to determine if these systems are adequately

shielded from external RF energy. You should also check with

the manufacturer of any equipment that has been added to

your vehicle. Consult the manufacturer of any personal

medical devices (such as pacemakers, hearing aids, etc.) to

determine if they are adequately shielded from external RF

energy. Turn your phone OFF in health care facilities when

any regulations posted in the areas instruct you to do so.

Hospitals or health care facilities may be using equipment that

could be sensitive to external RF energy.

Aircraft

Turn your phone OFF before boarding any aircraft.

* Use it on the ground only with crew permission.

* Do not use it in the air.

To prevent possible interference with aircraft systems, Federal

AviationAdministration (FAA) regulations require you to have

permission from a crew member to use your phone while the

plane is on the ground. To prevent interference with cellular

systems, FCC regulations prohibit using your phone while the

plane is in the air.

Children

Do not allow children to play with your phone. It is not a toy.

Children could hurt themselves or others (by poking

themselves or others in the eye with the antenna, for

example). Children also could damage the phone, or make

calls that increase your telephone bills.

Blasting Areas

To avoid interfering with blasting operations, turn your unit

OFF when in a “blasting area” or in areas posted: "Turn off

two-way radio."

Construction crews often use remote control RF devices to set

off explosives.

Air Bags

An air bag inflates with great force. DO NOT place objects,

including both installed or portable wireless equipment, in the

area over the air bag or in the bag deployment area. If in-

vehicle wireless equipment is improperly installed and the air

bag inflates, serious injury could result.

Potentially Explosive Atmospheres

Turn your phone OFF when in any area with a potentially

explosive atmosphere. It is rare, but your phone or its

accessories could generate sparks. Sparks in such areas

could cause an explosion or fire resulting in bodily injury or

even death.

Areas with a potentially explosive atmosphere are often, but

not always, clearly marked. They include fueling areas such

as gas stations; below deck on boats; fuel or chemical transfer

or storage facilities; areas where the air contains chemicals or

particles, such as grain, dust, or metal powders; and any other

area where you would normally be advised to turn off your

vehicle engine.

Do not transport or store flammable gas, liquid, or explosives

in the compartment of your vehicle which contains your phone

or accessories.

Vehicles using liquefied petroleum gas (such as propane or

butane) must comply with the National Fire Protection

Standard (NFPA-58). For a copy of this standard, contact the

National Fire Protection Association, One Batterymarch Park,

Quincy, MA02269, Attn: Publication Sales Division.

PACEMAKER/ICDs

Research sponsored by the Wireless Technology Research,

LLC ("WTR"), indicates that some wireless telephones cause

interference with pacemakers. Accordingly, NEC America

endorses the following recommendations issued by the WTR:

Wireless phones should be kept at a safe distance from a

pacemaker. Existing data indicate that the greater the

distance between a pacemaker and a wireless phone, the less

risk of interference. These data further indicate that six inches

is the proper separation distance for minimal risk.

Practical steps to achieve this separation distance include:

oThe wireless telephone should not be placed over the

pacemaker, such as in a breast pocket, when it is in the

"ON" position. (A phone is "ON" when power is being

supplied to the telephone by the battery).

oThe phone should be used at the ear opposite the pacemaker.

Note: There is nothing in the comprehensive data to suggest

that bystanders with pacemakers would be at risk of

interference from others who are using wireless phones.

CONTROLS AND FEATURES

CONTENTS

Antenna

Earpiece

Receiver

Liquid Crystal

Display

Call Control

Keys

Function Keys

Volume

Dialing/SMS

Scroll Keys

Symbol Keys/

Scroll Keys

Microphone

Battery Locking Catch

Sounder/Speaker

Rechargeable

Battery Pack

Battery Charging

Jack

External Connector

Battery

Charging

Contacts

DISPLAY INDICATORS

Signal Strength Indicator

Clock Alarm Indicator

Battery Charge Indicator

Full Lock Indicator

Partial Lock Indicator

Digital Service Indicator

Analog Service IndicatorH

Home Service IndicatorR

Roam Service Indicator

Function Mode Indicator FCN

In Conversation Indicator

Call Timer Indicator 03m06s

Short Message Indicator *

Voice Mail Indicator

Repeat Dial RD

System Indicator

No Service

Battery Charging flashing

SMS KEYS

First Message U

Last Message V

Scroll Up U

Scroll Down V

Previous Message U

Next Message V

Left T

Right S

Delete Message CLR

Lock Message MEM

vii

A B

-1-

Getting Started

Installing and Removing the Battery 3

The Battery Charge Indicator 4

Charging and Recharging the Battery 4

Display Indicators 5

Quick Reference Guide 6

List of Menu Functions 7

Operation of the Phone

Turning On or Off 8

Placing a Call 8

Receiving a Call 9

Signal Strength 9

Volume Keys 9

Last Number Redial 10

Speed Dialing 10

Facility 11

Shortcuts 11

The Memory

Permanent Memory 12

Storing Information 13

Group Storing 13

Recalling Phone Numbers From Memory 14

Keying In Names 15

Editing Names or Numbers 16

Displaying “Hidden” Digits 16

Deleting Phone Numbers From Memory 16

Recalling A Memory Location Number 17

Scanning Phone Numbers Sequentially 17

Scanning Phone Numbers Alphabetically 17

Scratchpad 18

Displaying Your Own Phone Number, Day of the Week, 18

and Network Selection

Additional Features

Locking/Unlocking the Phone 18

Length of Your Calls 21

Total Call Time Counters 21

Setting the Backlight 22

Setting the Key Tone Volume Level 23

Setting the Ringing Volume 23

Selecting Alert Tone Type 24

Using the Phone on Two Networks 24

DTMF Tone Transmission 25

Tone Generator 26

Pauses 27,28

Memory Linking 28

CONTENTS

-2-

System Selection (Including Roaming) 29

Call Lists 31

Muting/Unmuting 32

Low Battery Alarm 33

Error Tone 34

Alarm Clock, Auto Power On, and Auto Off Function 34

Setting the Alarm 34

Setting Automatic Power On 36

Setting Automatic Power Off 37

Escalating Alert 39

Automatic Locking 40

Fixed Digit Dialing 41

Speed Dial Memory Locking 44

Temporary Lock Code Set 45

Reset User Settings (Default) 47

Wake-Up Message Programming 48

Call Type 49

Automatic Repeat Dialing 50

One-Touch Dialing 51

Multiple Language Selection 52

Clock/Calendar Setting 53

Minutes Reminder Tone 55

SID Management 56

Short Messaging Service 56

Short Message Alerts 57

Message Memory 59

Periodic Message Notification 60

Message View Mode 60

Message View Mode Keypad Summary 61

Message Headers 62

Message Separators 63

Deleting Messages 64

Callback Feature 64

Exiting Message Review Mode 65

Sort Order Feature 65

Voice Mail Feature 66

Roll Off Feature 66

Word Wrap Feature 67

SMS Initialize Feature 67

SID Management (System Identifier) 67

Non-Public Mode 68

NAM Programming 72

Maintenance

Care and Maintenance 72

Troubleshooting 73

Limited Warranty 74

Technical Information 77

NEC Service Support 78

GETTING STARTED

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung