NEC DS2000 IntraMail Bedienungsanleitung

DS2000 PC Card Instructions for Backup,

Restore, and Software Upgrade

Use PC Card P/N 85880 to back up and restore your site data. Use PC Card P/N 80051-V**.** to load or update

your system’s software. (Note that **.** denotes the level of the system software loaded on PC Card P/N 80051.)

PC Card P/N 80051 is a system software PC Card only.

You cannot use it to back up and restore site data.

Backing Up Site Data

To use PC Card P/N 85880 to back up site data:

1. Insert PC Card P/N 85880 into the CPU (see the figure

at right).

2. Be sure the CPU mode switch is set to RUN.

3. Enter the programming mode.

ICM + #*#* + 372000 + HOLD

4. Dial 9906 + HOLD.

You see: START?

To quit program 9906 instead of going to the next step,

dial N + HOLD.

5. Dial Y + HOLD.

You see: 9906: DATABASE NAME

6. Enter a name for the database you want to save (up to

10 characters long).

Refer to Name Programming at right if you need help

when entering names.

Skip this step if you want to save data in an address

that already has a name assigned.

7. When you are done entering the name, press HOLD.

You see the name and date of the first database stored.

If no databases are stored, you see: 9906: DB00

(empty)

8. The system assigns the name you entered in step 7 to

the address you select below:

Press VOL

▲

or VOL

▼

to scroll through the 16 data

base addresses (DB 00 through DB 15).

Skip this step to select the currently displayed data

base.

9. Press HOLD.

Normally, you see 9906: SAVING . . . . . . . . .

The PC Card Active LED is on during backup.

If the address you choose already has data stored in it,

you see: REPLACE DB nn Y/N.

- Press N + HOLD to back up to step 5.

- Press Y + HOLD to proceed.

You automatically exit programming when the backup

completes.

80000 - 27A

NEC America, Inc.

INSERT

EGABYTE

INEAR

LASH

www.cng.nec.com

Name Programming

Press a key the indicated number of times for desired character

Key 1 Time 2 Times 3 Times 4 Times 5 Times 6 Times 7 Times 8 Times 9 Times

1&- /‘1

2ABCa b c 2

3DEFd e f 3

4GHIghi4

5JKL j k l 5

6MNOmn o 6

7PQRSp q r s 7

8TUV t uv 8

9WX Y Z w x y z 9

0space : 0

#Not used

*Not used

After selecting a letter, press a key for another letter or wait 2 seconds for the cursor to automatically advance.

Additional Name Programming Options

HOLD Save name. In system programming, HOLD saves and exits name programming.

CONF Exit name programming without saving name.

VOL Up Scroll the cursor to the left.

VOL Dn Scroll the cursor to the right.

MW Put the cursor after the last entry.

LND Delete the character under the cursor.

FLASH Delete the character to the right of the cursor.

CLEAR Clear the entire entry.

CHECK Restore the previous entry,

Continued

Mode Switch

PC Card Active

LED

Loading System Software

To use PC Card P/N 80051 to load or update system

software:

When you load system software from the PC card, the system

restarts with all the factory-installed default values. All your

prior programmed entries are erased.

1. Insert the PC Card P/N 80051 into the CPU.

2. Be sure the CPU mode switch is set to BOOT.

3. Press the reset switch on the CPU to reset the system.

The LEDs on the CPU will start to cycle.

After about 1 minute, the system will restart with the new

software loaded. The LEDs will flash as shown at right.

4. Once the system restarts, switch the CPU mode switch to

RUN.

Restoring Site Data

To use PC Card P/N 85880 to restore site data:

1. Insert PC Card P/N 85880 into the CPU.

2. Be sure the CPU mode switch is set to RUN.

3. Enter the programming mode.

ICM + #*#* + 372000 + HOLD

4. Dial 9907 + HOLD.

You see: START?

5. Dial Y + HOLD.

You see the name and date of the first database stored. If no

data bases are stored, you see:

9907: DB00 (empty)

6. Press VOL ▲or VOL ▼to scroll through the 16 database addresses (DB 00 through DB 15) and select the

one you want to restore.

7. When the database you want to restore displays, press HOLD.

The PC Card Active LED is on during restore.

The system will automatically reset when the restore completes.

Major Alarm (Red)

On: Major alarm present

Off: Major alarm not present

Minor Alarm (Red)

On: Minor alarm present

Off: Minor alarm not present

RS-232 Port (Yellow)

Flashing: RS-232 port active

Off: RS-232 idle

CPU Running (Green)

Slow flash: CPU OK

On: CPU starting

80000 - 27A

NEC America, Inc.

INSERT

EGABYTE

INEAR

LASH

www.cng.nec.com

Mode Switch

PC Card Active

LED

April 13, 2004

Printed in U.S.A.

NEC Unified Solutions, Inc.

4 Forest Parkway, Shelton, CT 06484

TEL: 203-926-5400 FAX: 203-929-0535

www.necunifiedsolutions.com

*85880INS06*

85880INS06

Andere Handbücher für DS2000 IntraMail

Andere NEC Computerhardware Handbücher

NEC

NEC IE-789882-NS-EM1 Bedienungsanleitung

NEC

NEC IE-78K0-NS-P04 Bedienungsanleitung

NEC

NEC VR4181 mPD30181 Bedienungsanleitung

NEC

NEC N8103 Series Betriebsanleitung

NEC

NEC N8105-53 Bedienungsanleitung

NEC

NEC IE-703204-G1-EM1 Bedienungsanleitung

NEC

NEC N8154-20 Bedienungsanleitung

NEC

NEC IE-784937-NS-EM1 Bedienungsanleitung

NEC

NEC mPD75512 Bedienungsanleitung

NEC

NEC NEAX 7400 ICS Bedienungsanleitung

NEC

NEC DS2000 IntraMail Anleitung zur Verwendung

NEC

NEC N8105-63 Bedienungsanleitung

NEC

NEC QB-MINI2 Bedienungsanleitung

NEC

NEC Quadro K600 Bedienungsanleitung

NEC

NEC 78K/0 Series Bedienungsanleitung

NEC

NEC N8151-128 Benutzerhandbuch

NEC

NEC DS1-IF10CE Bedienungsanleitung

NEC

NEC IE-V850E1-CD-NW Bedienungsanleitung

NEC

NEC N8151-50A Bedienungsanleitung

NEC

NEC XN120 Vision Bedienungsanleitung

NEC

NEC NEC Express5800 Series Bedienungsanleitung

NEC

NEC IE-178054-NS-EM1 Bedienungsanleitung

NEC

NEC N8151-60 Bedienungsanleitung

NEC

NEC NEAX 2400 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung