NEC IE-703003-MC-EM1 Bedienungsanleitung

IN-CIRCUIT EMULATOR OPTION BOARD

IE-703003-MC-EM1

Document No. U11596EJ3V0UM00 (3rd edition)

Date Published April 1997 N

Printed in Japan

1996©

Target device

V853TM

Preliminary User’s Manual

V851, V852, V853, and V850 family are trademarks of NEC Corporation.

Windows is a trademark of Microsoft Corporation.

PC/AT is a trademark of International Business Machines Corporation.

Ethernet is a trademark of Xerox Corporation.

UNIX is a registered trademark in the United States and other countries, licensed exclusively through

X/Open Company Limited.

The information in this document is subject to change without notice.

No part of this document may be copied or reproduced in any form or by any means without the prior written

consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in

this document.

NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual

property rights of third parties by or arising from use of a device described herein or any other liability arising

from use of such device. No license, either express, implied or otherwise, is granted under any patents,

copyrights or other intellectual property rights of NEC Corporation or of others.

Regional Information

Some information contained in this document may vary from country to country. Before using any NEC

product in your application, pIease contact the NEC office in your country to obtain a list of authorized

representatives and distributors. They will verify:

•Device availability

•Ordering information

•Product release schedule

•Availability of related technical literature

•Development environment specifications (for example, specifications for third-party tools and

components, host computers, power plugs, AC supply voltages, and so forth)

•Network requirements

In addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary

from country to country.

NEC Electronics Inc. (U.S.)

Santa Clara, California

Tel: 800-366-9782

Fax: 800-729-9288

NEC Electronics (Germany) GmbH

Duesseldorf, Germany

Tel: 0211-65 03 02

Fax: 0211-65 03 490

NEC Electronics (UK) Ltd.

Milton Keynes, UK

Tel: 01908-691-133

Fax: 01908-670-290

NEC Electronics Italiana s.r.1.

Milano, Italy

Tel: 02-66 75 41

Fax: 02-66 75 42 99

NEC Electronics (Germany) GmbH

Benelux Office

Eindhoven, The Netherlands

Tel: 040-2445845

Fax: 040-2444580

NEC Electronics (France) S.A.

Velizy-Villacoublay, France

Tel: 01-30-67 58 00

Fax: 01-30-67 58 99

NEC Electronics (France) S.A.

Spain Office

Madrid, Spain

Tel: 01-504-2787

Fax: 01-504-2860

NEC Electronics (Germany) GmbH

Scandinavia Office

Taeby, Sweden

Tel: 08-63 80 820

Fax: 08-63 80 388

NEC Electronics Hong Kong Ltd.

Hong Kong

Tel: 2886-9318

Fax: 2886-9022/9044

NEC Electronics Hong Kong Ltd.

Seoul Branch

Seoul, Korea

Tel: 02-528-0303

Fax: 02-528-4411

NEC Electronics Singapore Pte. Ltd.

United Square, Singapore 1130

Tel: 253-8311

Fax: 250-3583

NEC Electronics Taiwan Ltd.

Taipei, Taiwan

Tel: 02-719-2377

Fax: 02-719-5951

NEC do Brasil S.A.

Sao Paulo-SP, Brasil

Tel: 011-889-1680

Fax: 011-889-1689

J96. 8

Main Revisions in This Edition

Pages Description

P2 CLKOUT of maskable pin is deleted in 1.2 Features (When connected to IE-703002-MC).

P2 Emulation Memory Capacity is modified in 1.3 Function Specifications (When connected to IE-

703002-MC).

P3 Target Connection Socket is modified from YQSOCKET100SDF to YQSCKETSDN in 1.4 System

Configuration.

P7 Insertion guides is modified to 4 in Figure 1-4. (c) Connecting part (IE-703003-MC-EM1).

P12 3.3 NMI Signal Addition of Description

The mark shows major revised points.

[MEMO]

INTRODUCTION

READERS

This manual is intended for users who design and develop application systems using the V853.

PURPOSE

The purpose of this manual is to describe the proper operation of the IE-703003-MC-EM1 and its basic

specifications.

ORGANIZATION

This manual is broadly divided into the following parts:

• Overview

• Settings of IE-703003-MC

• Cautions

HOW TO READ THIS MANUAL

This manual assumes readers who have general knowledge of electric engineering, logic circuits, and

microcomputers.

The IE-703003-MC-EM1 is used connected to the in-circuit emulator IE-703002-MC for the V851™ and

V852™. This manual explains the basic setup procedure and switch settings of the IE-703002-MC when it is

connected to the IE-703003-MC-EM1. For the names and functions, and the connection of parts, refer to the

“IE-703002-MC User’s Manual Hardware”.

To learn the basic specifications and operation methods broadly

→Read this manual in the order listed in CONTENTS.

To learn the operation methods and command functions, etc., of the IE-703002-MC and IE-703003-MC-EM1

→Read the user’s manual of the debugger (optional) that is used.

LEGEND

Note : Describe items noted in text.

Caution : Describe points that require special attention.

Remark : Provide supplementary remarks to description in text.

Numeral representations : Binary …xxxx or xxxxB

Decimal …xxxx

Hexadecimal …0xxxxx or xxxxH

Prefix representing the power of 2 (Address space, Memory capacity):

K (kilo) : 210 = 1024

M (mega) : 220 = 10242

TERMINOLOGY

The meaning of terms used in this manual is listed below.

Target device Device that is emulated.

Target system The system (user-built system) to be debugged. This includes the target program and user-

configured hardware.

RELATED DOCUMENTS

Some of the related documents listed below may be preliminary editions, but are not noted as such.

{Documents related V853

Document Document Number

V853 User’s Manual Hardware U10913E

PD703003 Data Sheet Planned

PD70F3003 Data Sheet Planned

V850 familyTM User’s Manual Architecture U10243E

V850 family Instruction List U10229E

{Documents related to development tools

Product Document Number

IE-703002-MC Hardware U11595E

IE-70000-MC-SV2 (Communication module) U11781E

IE-70000-MC-IF (Communication module adopter) U11601E

CA850 (C Compiler package) Operation UNIXTM based U11013E

Operation WindowsTM based U11068E

C language U11010E

Assembly Language U10543E

RX850 (Real-time OS) Basics U11037E

Technical U11117E

Nucleus installation U11038E

Debugger Windows-based U11158E

AZ850 (System performance analyzer) Operation U11181E

ID850 (C source debugger) Operation Windows-based Planned

Operation UNIX-based Planned

Installation Windows-based Planned

Installation UNIX-based Planned

- i -

CONTENTS

CHAPTER 1 OVERVIEW..................................................................................................................... 1

1.1 Hardware Configuration......................................................................................................................... 1

1.2 Features................................................................................................................................................... 2

1.3 Function Specifications ......................................................................................................................... 2

1.4 System Configuration............................................................................................................................. 3

1.5 Contents in Carton.................................................................................................................................. 4

1.6 Connection between IE-703002-MC and IE-703003-MC-EM1.............................................................. 6

CHAPTER 2 IE-703002-MC SETTING................................................................................................ 9

2.1 Settings of JP2, SW1, and SW2............................................................................................................. 9

2.2 Settings of JP1, JP3, and JP4................................................................................................................ 10

CHAPTER 3 CAUTIONS...................................................................................................................... 11

3.1 Internal RAM and ROM........................................................................................................................... 11

3.2 Target System VDD .................................................................................................................................. 11

3.3 NMI Signal ............................................................................................................................................... 12

3.4 X1 Signal.................................................................................................................................................. 12

APPENDIX DIMENSIONS...................................................................................................................... 13

- ii -

List of Figures

Figure No. Title Page

1-1. System Configuration.................................................................................................................................... 3

1-2. Contents in Carton......................................................................................................................................... 4

1-3. Accessories................................................................................................................................................... 5

1-4. Connection between IE-703002-MC and IE-703003-MC-EM1...................................................................... 6

3-1. NMI Signal-Flow Path.................................................................................................................................... 12

3-2. X1 Signal-Flow Path...................................................................................................................................... 12

- iii -

List of Tables

Table No. Title Page

2-1. Settings of JP2, SW1, and SW2.................................................................................................................... 9

2-2. Settings of JP1, JP3, and JP4....................................................................................................................... 10

3-1. Memory Capacity Limitation List ................................................................................................................... 11