NEC N8405-019 Bedienungsanleitung

N8405-019/019A

EM Card User's Guide

SIGMABLADE Monitor Operation Guide

OSD (On Screen Display) Operation Guide

18th Edition

4-2016

Trademarks

NEC EXPRESSBUILDER, NEC ESMPRO, NEC DianaScope, EXPRESSSCOPE, SIGMABLADE and NEC

SigmaSystemCenter are registered trademarks of NEC Corporation.

Microsoft and Windows are worldwide registered trademarks of Microsoft Corporation of the U.S.A.

NEC SigmaSystemCenter is a registered trademark or trademark of NEC Corporation in Australia,Austria, Benelux, France,

Hong Kong, India, Mexico, Norway, the Philippines, Singapore, Spain, Sweden, Taiwan, Thailand, the United States, the

United Kingdom and other countries.

Linux is a registered trademark of Linus Torvalds.

All trademarks and logos including Red Hat are registered trademarks or trademarks of Red Hat, Inc. in the United States and

other countries.

VMware, VMWare ESX, VMWare vSphere are registered trademarks or trademarks of VMware, Inc. in the United States

and other countries.

All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their

respective trademark owners.

CE Statement

Warning: This is a Class A product. In domestic environment this product may cause radio

interference in which case the user may be required to take adequate measures (EN55022).

BSMI Statement

MIC Statement

1. EM Card (EXP462A)

2. NEC Corporation

3. 2006.11

4. NEC Computertechno, Ltd. / JAPAN

Notes:

(1) No part of this manual may be reproduced in any form without the prior written permission of NEC

Corporation.

(2) The contents of this manual may be revised without prior notice.

(3) The contents of this manual shall not be copied or altered without the prior written permission of NEC

Corporation.

(4) All efforts have been made to ensure the accuracy of all information in this manual. If you notice any part

unclear, incorrect, or omitted in this manual, contact the service representative where you purchased this

product.

(5) NEC assumes no liability arising from the use of this product, nor any liability for incidental or

consequential damages arising from the use of this manual regardless of Item (4).

(6) Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate.

This only applies to California, USA.

- i-

Read this User's Guide and the User's Guide of the server before using the product.

Keep this User's Guide at hand for quick reference at anytime necessary.

Be sure to read this section carefully.

NOTES ON USE - Always read the Notes -

The following includes information necessary for proper and safe operation of the product.

SAFETY INDICATIONS

Follow the instructions in this manual for your safety to use the product.

In the User's Guide, "WARNING" or "CAUTION" is used to indicate a degree of danger. These terms

are defined as follows:

WARNING

Indicates the presence of a hazard that may result in death or serious

personal injury if the instruction is ignored.

CAUTION

Indicates the presence of a hazard that may cause minor personal injury,

including burns, or property damage if the instruction is ignored.

Precautions and notices against hazards are presented with one of the following three symbols. The

individual symbols are defined as follows:

This symbol indicates the presence of a hazard if the instruction is ignored.

An image in the symbol illustrates the hazard type. (Attention)

This symbol indicates prohibited actions. An image in the symbol illustrates a

particular prohibited action. (Prohibited Action)

This symbol indicates mandatory actions. An image in the symbol illustrates a

mandatory action to avoid a particular hazard. (Mandatory Action)

(Example)

Symbol to draw attention

Description of a danger

Term indicating a degree of danger

CAUTION

Do not disassemble, repair, or alter the server.

Never attempt to disassemble, repair, or alter the server on any occasion

other than described in this User's Guide. Failure to follow this instruction may

cause an electric shock or fire as well as malfunctions of the server.

Symbols used in this User's Guide and warning labels are listed below.

- ii -

- iii -

Attentions

Indicates that improper use may cause an electric shock.

Indicates that improper use may cause personal injury.

Indicates that improper use may cause fingers to be caught.

Indicates that improper use may cause fumes or fire.

Indicates a general notice or warning that cannot be specifically identified.

Prohibited Actions

Indicates a general prohibited action that cannot be specifically identified.

Do not disassemble, repair, or modify the server. Otherwise, an electric shock or fire

may be caused.

Mandatory Action

Unplug the power cord of the server. Otherwise, an electric shock or fire may be

caused.

Indicates a mandatory action that cannot be specifically identified. Make sure to follow

the instruction.

- iv -

- v-

Safety Notes

This section provides notes on using the product safely. Read this section carefully to ensure proper

and safe use of the product. For symbols, see "SAFETY INDICATIONS" provided earlier.

General

WARNING

Do not use the server for services where critical high availability may directly

affect human lives.

The server is not intended to be used with or control facilities or devices

concerning human lives, including medical devices, nuclear facilities and

devices, aeronautics and space devices, transportation facilities and devices;

and facilities and devices requiring high reliability. NEC assumes no liability for

any accident resulting in personal injury, death, or property damage if the

server has been used in the above conditions.

CAUTION

Keep water or foreign matter away from the server.

Do not let any form of liquid (water etc.) or foreign matter (e.g., pins or paper

clips) enter the server. Failure to follow this warning may cause an electric

shock, a fire, or a failure of the server. When such things accidentally enter the

server, immediately turn off the power and disconnect the power plug from the

outlet. Do not disassemble the server. Contact your service representative.

- vi -

- vii -

Installation, Relocation, Storage, and Connection

CAUTION

Do not install or store the server in any place other than specified.

Do not install or store the server in the following places or any place other than

specified in this manual. Failure to follow this instruction may cause a fire.

a dusty place

a humid place such as near a boiler

a place exposed to direct sunlight

an unstable place

Do not use the server in the place where corrosive gases exist.

Make sure not to locate or use the server in the place where corrosive gases

(sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine, ammonia, ozone,

etc) exist.

Also, do not set it in the environment where the air (or dust) includes

components accelerating corrosion (ex. sulfur, sodium chloride) or conductive

metals. There is a risk of a fire due to corrosion and shorts of an internal printed

board.

Do not use any unauthorized interface cable.

Use only interface cables provided by NEC and locate a proper device and

connector before connecting a cable. Using an unauthorized cable or

connecting a cable to an improper destination may cause a short circuit,

resulting in a fire.

Also, observe the following notes on using and connecting an interface cable.

Do not use any damaged cable connector.

Do not use any damaged cable.

Do not step on the cable.

Do not place any object on the cable.

Do not use the server with loose cable connections.

Do not pinch your finger with mechanical components.

Note sufficiently that your fingers may not be caught between a door and

another mechanical part or cut at installation or removal of the product in/from

the server.

- viii -

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NEC Computerhardware Handbücher

NEC

NEC N8551-29F Bedienungsanleitung

NEC

NEC uPD780318 Subseries Bedienungsanleitung

NEC

NEC NL12880BC20-05 Bedienungsanleitung

NEC

NEC N8154-24 Bedienungsanleitung

NEC

NEC N8105-63 Bedienungsanleitung

NEC

NEC VR4181 mPD30181 Bedienungsanleitung

NEC

NEC N8151-101 Bedienungsanleitung

NEC

NEC Quadro K600 Bedienungsanleitung

NEC

NEC Thin Client US310e Bedienungsanleitung

NEC

NEC N8104-206 Bedienungsanleitung

NEC

NEC N8103-179 Betriebsanleitung

NEC

NEC IE-70000-MC-NW-A Bedienungsanleitung

NEC

NEC PD78052 Bedienungsanleitung

NEC

NEC N8151-143 Bedienungsanleitung

NEC

NEC IECUBE2 Bedienungsanleitung

NEC

NEC NEAX 2400 Bedienungsanleitung

NEC

NEC IE-703002-MC Bedienungsanleitung

NEC

NEC N8151-60 Bedienungsanleitung

NEC

NEC V850/SF1 Bedienungsanleitung

NEC

NEC IE-784937-NS-EM1 Bedienungsanleitung

NEC

NEC IE-789306-NS-EM1 Bedienungsanleitung

NEC

NEC NE3703-001 Betriebsanleitung

NEC

NEC 455-01593-000 Bedienungsanleitung

NEC

NEC N8103-181 Betriebsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung