NEC 200 Bedienungsanleitung
MultiSync LCD200
User’s Manual
Declaration of the Importer
We hereby certify that the
Color monitor LA-1221JMW
MultiSync LCD200
is in compliance with
Council Directive 73/23/EEC:
- EN 60950
Council Directive 89/336/EEC:
- EN 55022
- EN 60555-2
- EN 60555-3
- EN 50082-1
(IEC 801-2)
(IEC 801-3)
(IEC 801-4)
and marked with
NEC Europe Ltd. Ismaning Office
Steinheilstraße 4-6
D-85737 Ismaning, Germany
Safety Instruction
Caution:
When operating the LA-1221JMW with a 220-240V AC power source
in Europe except UK, use the power cord provided with the monitor.
In UK, a BS approved power cord with moulded plug has a Black (five
Amps) fuse installed for use with this equipment. If a power cord is not
supplied with this equipment please contact your supplier.
When operating the LA-1221JMW with a 220-240V AC Power source
in Australia, use the power cord provided with the monitor.
For all other cases, use a power cord that matches the AC voltage of the
power outlet and has been approved by and complies with the safety
standard of your particular country.
IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of
International Business Machines Corporation.
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
NEC is a registered trademark of NEC Corporation. ErgoDesign, IPM, OSM, ColorControl,
OptiClear, CROMACLEAR and Advanced Digital Control System are trademarks of NEC Home
Electronics, Ltd.
MultiSync is a registered trademark of NEC Technologies, Inc in U.S., and of NEC Home
Electronics, Ltd in Canada, U.K., Germany, France, Spain, Italy, Austria, Benelux,
Switzerland, Denmark, Finland, Norway and Saudi Arabia.
All other trademarks or registered trademarks are property of their respective owners.
English
Introduction to the NEC MultiSync LCD200
Congratulations on your purchase of the NEC MultiSync LCD200 true
color monitor!
True Color Monitor
The MultiSync LCD200 monitor incorporates NEC’s own l2.1" true
color active matrix thin-film-transistor (TFT) liquid crystal display to
provide superior display performance and a reduced footprint. Less than
18 cm in depth, the MultiSync LCD200 monitor is ideal for
environments with space and weight constraints that require superior
image quality. A high resolution of 1024 x768 and a fine dot pitch of
0.24mm are ideal for displaying complex graphics and high definition
images. The MultiSync LCD200 monitor also supports 800 x 600 and
VGA graphics and text modes. Other examples of features that enhance
the MultiSync LCD200 monitor’s performance are Microsoft’s Plug and
Play compatibility, NEC’s ErgoDesign features and OSM (On Screen
Manager) controls. This LCD monitor also carries the MultiSync brand
name, ensuring greater compatibility with today’s sophisticated
computer platforms.
Analog Advantage
Because NEC incorporates only its own patented analog LCD modules
into its MultiSync LCD monitors, the MultiSync LCD200 monitor is
capable of displaying over 16.7 million colors in a continuous spectrum,
providing a truer representation of color. Like its analog predecessors
based on CRT technology, the MultiSync LCD200 monitor displays a
continuous gray scale and does not require the use of dithering
techniques, a mainstay of digital LCD panels, to approximate
intermediate shades of gray. In addition, the monitor’s high contrast
LCD enhances color vibrancy and improves focus with no geometric
distortion.
Introduction to the NEC MultiSync LCD200 E-1
Wider Compatibility
Adapting the latest advances in satellite technology to the circuitry
employed within the MultiSync LCD200 monitor, NEC provides wide
range compatibility with today’s graphics driver technology. Because
the MultiSync LCD200 monitor is analog through and through, it does
not require special analog to digital display or interface cards but can
accept RGB input directly. Consequently, the same display cards that
are used to drive the Multisync LCD200 monitor can also be used to
drive standard CRT monitors. NEC’s MultiSync LCD200 monitor can
be used with a wide range of systems such as IBM PC compatible
computers, Macintosh and Power Macintosh.
FullScan Capability
Using NEC’s own FullScan Capability, all of the resolutions supported
on the MultiSync LCD200 monitor are displayed full screen, utilizing
the most of the monitor’s large display area. Rather than displaying
640x480 resolution as a small box in the center of the MultiSync
LCD200 monitor’s display, this VGA resolution is displayed full screen,
allowing for greater visibility.
Reduced Footprint
The MultiSync LCD200 monitor offers nearly the same viewable image
size as conventional 14-inch and 15-inch CRTs at 40% of the depth and
30% of the weight. With a depth of about 17 cm and a weight of 4 kg,
the reduced footprint of NEC’s MultiSync LCD monitor provides the
ideal solution for environments requiring superior image quality but
with size and weight limitations. And the monitor’s small footprint and
low weight allow it to be moved or transported easily from one location
to another.
Low Power Consumption
The MultiSync LCD200 monitor has been designed with NEC’s IPM
(Intelligent Power Manager) System. When utilized with an Energy
Star system or display card, the MultiSync LCD200’s IPM System is an
innovative power-saving utilily that complies with both the EPA’s
Energy Star requirements and Europe’s NUTEK power management
E - 2 Introduction to the NEC MultiSync LCD200
requirements. With a maximum power consumption of 33 watts, the
MultiSync LCD200 monitor consumes over 50% less power than
conventional CRTs and emits less heat. In its power-saving mode, the
MultiSync LCD200 monitor consumes less than 6 watts. All this
translates into energy savings, environmental protection, reduced
emissions and reduced air conditioning costs of the work environment.
The MultiSync LCD200 monitor follows the Video Electronics Standard
Association (VESA) approved power-down signaling method. Endorsed
by the EPA, VESA’s Display Power Management Signaling (DPMS)
method is the power-down process a system should use to communicate
to the monitor to save power. Power-down functions can be utilized
only with an Energy Star system or display card which adheres to the
VESA DPMS standard. By using the monitor’s horizontal and vertical
SYNC signals, the monitor can be prompted into the different IPM
modes. The following is the description of the LED indicator for the
IPM power-saving modes:
Mode LED Indicator Power Consumption
ON Green Typical: 33 watts
Standby & Suspend Amber Typical: About 6 watts
Power Switch OFF No Light No Power Used
Plug and Play
Plug and Play is the new Microsoft solution with Windows 95 to
provide automatic peripheral connections without confusing and
time-consuming setup. NEC developed the monitor’s Plug and Play
capability that allows your Plug and Play compatible system to
automatically identify, configure and optimize the monitor connected to
it. The MultiSync LCD200 monitor automatically tells the system its
identification and capabilities. NEC’s partnership with Microsoft
provides you with simple installation, setup and service.
Introduction to the NEC MultiSync LCD200 E-3
ErgoDesign Features
The MultiSync LCD200 monitor utilizes NEC’s ErgoDesign features
philosophy that adapts technology to the way you work, increasing
productivity through enhancements in comfort and ease of use.
ErgoDesign features include a low glare screen treatment, power and
brightness controls that are positioned within easy reach, easy-to-use
on-screen controls and a tilt base that easily adjusts to each individual’s
preferred angle of vision.
Reduced Emissions
Incorporating NEC’s own Reduced Magnetic Field technology, the
MultiSync LCD200 monitor has minimal field emissions and follows the
strictest international magnetic field, alternating electric field and
electrostatic guidelines.
OSM (On-Screen Manager) Controls
The OSM (On-Screen Manager) controls simplify the MultiSync’s
Advanced Digital Control System. The control system is easily
accessed. Just touch the PROCEED button on the front of the monitor,
which gives you access to the Position, Image Adjust and Contrast
controls, the ColorControl System and many others. Use the front
controls for navigation.
Position
Image Adjust
Contrast
AccuColor
OSM Location
OSM Turn Off Time
OSM Lock Out
ON SCREEN MANAGER
E - 4 Introduction to the NEC MultiSync LCD200
Through the OSM control’s enhanced ColorControl System, you can
better match your image color to a variety of standards such as:
–Your personal preference (depending upon the application
used).
–A color standard such as Pantone or Trumatch.
–Another monitor.
–Your printer or Service Bureau output.
Additional OSM controls are available such as OSM Location, OSM
Turn Off Time, OSM Lock Out, Display Mode, Language Select and
Factory Preset.
Introduction to the NEC MultiSync LCD200 E-5
Andere Handbücher für 200
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Sprachen:
Andere NEC Monitor Handbücher
NEC
NEC A500 JC-1576VMB Bedienungsanleitung
NEC
NEC AccuSync LCD72VXM Bedienungsanleitung
NEC
NEC MultiSync ME Series Bedienungsanleitung
NEC
NEC MultiSync X554UNV Bedienungsanleitung
NEC
NEC MultiSync 20WGX2 Series Bedienungsanleitung
NEC
NEC 60XM5 - PlasmaSync - 60" Plasma Panel Bedienungsanleitung
NEC
NEC MultiSync UN552V Bedienungsanleitung
NEC
NEC PlasmaSync 42XC10 Bedienungsanleitung
NEC
NEC EA244WMi-BK Bedienungsanleitung
NEC
NEC PlasmaSync 42VP4D Bedienungsanleitung
NEC
NEC MultiSync E271N Bedienungsanleitung
NEC
NEC MultiSync LCD1530V Stücklistenhandbuch
NEC
NEC MultiSync UN462A Gebrauchs- und Pflegehandbuch
NEC
NEC AccuSync LCD3000 Bedienungsanleitung
NEC
NEC MultiSync V422 Gebrauchs- und Wartungshandbuch
NEC
NEC MultiSync LCD2000 Bedienungsanleitung
NEC
NEC MultiSync P241W Bedienungsanleitung
NEC
NEC MultiSync WD551 Bedienungsanleitung
NEC
NEC MultiSync LCD1565 Bedienungsanleitung
NEC
NEC MultiSync LCD300 Bedienungsanleitung
