NEC E658 Benutzerhandbuch

English-1

English

Important Information .............................................................................................. English-2

Installation ...............................................................................................................English-9

Index

NOTE: This product can only be serviced in the country where it was purchased.

(1) The contents of this manual may not be reprinted in part or whole without permission.

(2) The contents of this manual are subject to change without notice.

(3) Great care has been taken in the preparation of this manual; however, should you notice any

questionable points, errors or omissions, please contact us.

(4) The image shown in this manual is indicative only. If there is inconsistency between the image

and the actual product, the actual product shall govern.

(5) Notwithstanding articles (3) and (4), NEC will not be responsible for any claims on loss of prot

or other matters deemed to result from using this device.

(6) This manual is commonly provided to all regions so they may contain descriptions that are

pertinent for other countries.

Contents

• Monitor (1)

• Remote control (1)

• 1.5 V AAA batteries (2)

• Power cord (1)

• HDMI cable (1)

• Setup manual (1)

Remember to save your original box and packing material to transport or ship the monitor.

English-2

Important Information

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING

WHEN SETTING UP AND USING THE LCD COLOR MONITOR:

About the Symbols

To ensure safe and proper use of the product, this manual uses a number of symbols to

prevent injury to you and others as well as damage to property. The symbols and their

meanings are described below. Be sure to understand them thoroughly before reading

this manual.

WARNING

Failing to heed this symbol and handling the product incorrectly could

result in accidents leading to major injury or death.

CAUTION

Failing to heed this symbol and handling the product incorrectly could

result in personal injury or damage to surrounding property.

Examples of symbols

Indicates a warning or caution.

This symbol indicates you should be careful of electric shocks.

Indicates a prohibited action.

This symbol indicates something that must be prohibited.

Indicates a mandatory action.

This symbol indicates that the power cord should be unplugged from the power

outlet.

English-3

English

WARNING

UNPLUG

THE POWER

CORD

Unplug the power cord if the product malfunctions.

Should the product emit smoke or strange odors or sounds, or if the

product has been dropped or the cabinet broken, turn off the product’s

power, then unplug the power cord from the power outlet. Failure to

do so could not only lead to re or electric shock, it could also result in

burn impairment. Contact your dealer for repairs.

Never try to repair the product on your own. Doing so is dangerous.

Do not open or remove the product’s cabinet.

Do not disassemble the product.

There are high voltage areas in the product. Opening or removing

product covers and modifying the product may expose you to electric

shock, re, or other risks.

Refer all servicing to qualied service personnel.

Do not use the product if it has structural damage.

If you notice any structural damage such as cracks or unnatural

wobbling, please refer servicing to qualied service personnel. If

the product is used in this condition, the product may fall or cause

personal injury.

Handle the power cord with care. Damaging the cord could lead to re

or electric shock.

• Do not place heavy objects on the cord.

• Do not place the cord under the product.

• Do not cover the cord with a rug, etc.

• Do not scratch or modify the cord.

• Do not bend, twist or pull the cord with excessive force.

• Do not apply heat to the cord.

Should the cord be damaged (exposed core wires, broken wires, etc.),

ask your dealer to replace it.

5Do not touch the power plug if you hear thunder. Doing so could result

in electric shock.

Please use the power cord provided with this product in accordance

with the power cord table.

If a power cord is not supplied with this product, please contact NEC.

For all other cases, please use the power cord with the plug style

that matches the power socket where the product is located. The

compatible power cord corresponds to the AC voltage of the power

outlet and has been approved by, and complies with, the safety

standards in the country of purchase.

For proper installation it is strongly recommended to use a trained

service person.

Failure to follow the standard installation procedures could result in

damage to the product or injury to the user or installer.

English-4

WARNING

Please install the product in accordance with the following information.

This product cannot be used or installed without the wall mount or

other mounting accessory for support.

When transporting, moving, or installing the product, please use as

many people (two or more people for the E328/E438/E498/E558 and

four or more people for the E658) as necessary to be able to lift the

product without causing personal injury or damage to the product.

Please refer to the instructions included with the optional mounting

equipment for detailed information about attaching or removing.

Do not cover the vent on the product. Improper installation of the

product may result in damage to the product, an electric shock or re.

Do not install the product in the locations below:

• Poorly ventilated spaces.

• Near a radiator, other heat sources, or in direct sunshine.

• Continual vibration areas.

• Humid, dusty, steamy, or oily areas.

• Outdoors.

• High-temperature environment where humidity changes rapidly and

condensation is likely to occur.

• A ceiling or wall that is not strong enough to support the product and

mounting accessories.

Do not mount the product upside down.

English-5

English

WARNING

Prevent tipping and falling for earthquakes or other shocks.

To prevent personal injury or damage to the product caused by tipping

over due to earthquakes or other shocks, make sure to install the

product in a stable location and take measures to prevent falling.

The measures to prevent falling and tipping are intended for reducing

the risk of injury, but may not guarantee the effectiveness against all

earthquakes.

The product may tip causing personal injury.

• Use commercially-available clamps and screws (M6) to secure it to

the product.

• Be sure to remove the cord or chain from the wall before moving the

product to prevent personal injury or damage to the product.

The product may fall causing personal injury.

• Do not attempt to hang the product using an installation safety wire.

• Please install the product in an area on the wall or ceiling strong

enough to support the weight of the product.

• Prepare the product using mounting accessories, such as hook,

eyebolt, or mounting parts, and then secure the product with a

safety wire. The safety wire must not be tight.

• Please make sure the mounting accessories are strong enough to

support the product weight and size before installing it.

English-6

WARNING

Stability Hazard.

The product may fall, causing serious personal injury or death. To

prevent injury, this product must be securely attached to the oor/wall

in accordance with the installation instructions.

Many injuries, particularly to children, can be avoided by taking simple

precautions such as:

• ALWAYS use wall mount or installation methods recommended by

the manufacturer of the product set.

• ALWAYS use furniture that can safely support the product.

• ALWAYS ensure the product is not overhanging the edge of the

supporting furniture.

• ALWAYS educate children about the dangers of climbing on

furniture to reach the product or its controls.

• ALWAYS route cords and cables connected to your product so they

cannot be tripped over, pulled or grabbed.

• NEVER place a product in an unstable location.

• NEVER place the product on tall furniture (for example, cupboards

or bookcases) without anchoring both the furniture and the product

to a suitable support.

• NEVER place the product on cloth or other materials that may be

located between the product and supporting furniture.

• NEVER place items that might tempt children to climb, such as toys

and remote controls, on the top of the product or furniture on which

the product is placed.

If the existing product is going to be retained and relocated, the same

considerations as above should be applied.

Do not insert objects of any kind into the cabinet slots. It may cause

electric shock, re, or product failure. Keep objects away from children

and babies.

Do not spill any liquids into the cabinet or use your product near water.

Immediately turn off the power and unplug your product from the wall

outlet, then refer servicing to qualied service personnel. It may cause

an electric shock or start a re.

12 Do not use ammable gas sprays to remove dust when cleaning the

product. Doing so could lead to a re.

English-7

English

CAUTION

Handling the power cord.

Handle the power cord with care. Damaging the cord could lead to re

or electric shock.

• When connecting the power cord to the product’s AC IN terminal,

make sure the connector is fully and rmly inserted.

• Fasten the power cord to the product by attaching the clamp to

prevent loose connection.

• Do not connect or disconnect the power cord with wet hands.

• When connecting or disconnecting the power cord, pull the power

cord out by holding onto its plug.

• When cleaning the product, for safety purposes, unplug the power

cord from the power outlet beforehand. Regularly dust off the power

cord by using a soft dry cloth.

• Before moving the product, make sure the product power is off,

then unplug the power cord from the power outlet and check that all

cables connecting the product to other devices are disconnected.

• When you are not planning to use the product for an extended

period of time, always unplug the power cord from the power outlet.

2Do not bind the power cord and the USB cable. It may trap heat and

cause a re.

Do not connect to a LAN with excessive voltage.

When using a LAN cable, do not connect to a peripheral device with

wiring that might have excessive voltage. Excessive voltage on the

LAN port may cause an electric shock.

Do not climb on the table where the product is installed. Do not install

the product on a wheeled table if the wheels on the table have not

been properly locked. The product may fall, causing damage to the

product or personal injury.

Installation, removal, and height adjustment of the optional wall mount.

• When installing the wall mount, handle the unit with care to avoid

pinching your ngers.

Do not push or climb on the product. Do not grab or hang onto the

product.

The product may fall, causing damage to the product or personal

injury.

7Do not impact the LCD panel surface, it can cause serious damage to

the product or personal injury.

English-8

CAUTION

Incorrect usage of batteries can result in leaks or bursting.

• Insert batteries matching the (+) and (-) signs on each battery to the

(+) and (-) signs of the battery compartment.

• Do not mix battery brands.

• Do not combine new and old batteries. This can shorten battery life

or cause liquid leakage of batteries.

• Remove dead batteries immediately to prevent battery acid from

leaking into the battery compartment.

• Do not touch exposed battery acid, it may injure your skin.

• Disposal of a battery into re or a hot oven, or mechanically

crushing or cutting of a battery, that can result in an explosion.

• Leaving a battery in an extremely high temperature surrounding

environment, or a battery subject to extremely low air pressure, that

can result in an explosion or the leakage of ammable liquid or gas.

• Contact your dealer or local authorities when disposing of batteries.

9Suitable for entertainment purposes at controlled luminous

environments, to avoid disturbing reections from the screen.

We recommend wiping clean the ventilation holes a minimum of

once a month. Failure to do so could lead to re or electric shock or

damage to the product.

To ensure the product’s reliability, please clean the ventilation holes

at the rear side of the cabinet at least once a year to remove dirt and

dust. Failure to do so could lead to re or electric shock or damage to

the product.

English-9

English

Installation

For box contents, please refer to the Contents on the Index page of this document.

Product warranty does not cover damage caused by improper installation. Failure to follow

these recommendations could result in voiding the warranty.

WARNING: Please refer to “WARNING 7”, “WARNING 8”, “WARNING 9”, and

“WARNING 11”.

1. Install the remote control batteries

The remote control is powered by two 1.5 V AAA batteries.

To install or replace batteries:

NEC recommends the following battery use:

CAUTION: Please refer to “CAUTION 8”.

NOTE: If you do not intend to use the Remote Control for a long period of time,

remove the batteries.

English-10

2. Connect external equipment

•To protect the external equipment, disconnect the power cord of this product before

making connections.

Dotted lines = other signal

Solid lines = video signal

Dashed lines = audio signal

Power supply port 5V/3A

(maximum)

Computer (RS-232C)

USB storage for

Media Player

Blu-ray or

DVD Player (HDMI)

Video Player (HDMI)

Computer (HDMI)

Computer (stereo mini-jack)

Computer (D-Sub)

Video player

(stereo mini-jack)

Video player (component)

VCR

Headphone

External speaker

AV Amplier

Headphones connection

When using headphones, connect them to the HEADPHONE connector of the product.

CAUTION: Do not connect the headphones while wearing them.

Otherwise, your ears may be injured depending on the sound volume.

NOTE: • Headphones with a stereo mini-

jack plug can be connected to

the product. If the plug of your

headphones is too large to enter the

connector, buy a 6.35 mm stereo

jack plug to stereo mini-jack plug

adapter in your audio store.

• The sound from the speaker is

muted when headphones are

connected.

• Adjustment of the volume control as

well as the equalizer to other settings than the center position may increase

the ear-/headphones output voltage and therefore the sound pressure level.

NOTE: When connecting the product to the

video output connector (component)

of a video player or another device,

go to [Setup] in the OSD menu →

[VGA Options] → [VGA Mode], and

select [YPbPr].

HEADPHONE connector

Andere Handbücher für E658

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NEC Monitor Handbücher

NEC

NEC PlasmaSync 42PD2 Bedienungsanleitung

NEC

NEC PlasmaSync PX-42XM3W Bedienungsanleitung

NEC

NEC XP21 - MultiSync - 21" CRT Display Bedienungsanleitung

NEC

NEC MultiSync XV17+ Bedienungsanleitung

NEC

NEC LCD175VX - MultiSync - 17" LCD Monitor Leitfaden

NEC

NEC LCD1770GX-BK Bedienungsanleitung

NEC

NEC MultiSync EA223WM Stücklistenhandbuch

NEC

NEC E231W-BK Bedienungsanleitung

NEC

NEC PlasmaSync 42PD1 Bedienungsanleitung

NEC

NEC LCD1760VM - MultiSync - 17" LCD Monitor Bedienungsanleitung

NEC

NEC LCD2490WUXI2-BK - MultiSync - 24" LCD... Bedienungsanleitung

NEC

NEC P1150 - MultiSync - 21" CRT Display Technisches Handbuch

NEC

NEC LCD8205 - MultiSync - 82" LCD Flat Panel... Bedienungsanleitung

NEC

NEC MultiSync 24WMGX3 Bedienungsanleitung

NEC

NEC MultiSync FP1355 FP1355 FP1355 Bedienungsanleitung

NEC

NEC LCD1700V - MultiSync - 17" LCD Monitor Bedienungsanleitung

NEC

NEC M40 - MULTEOS - 40" LCD TV Bedienungsanleitung

NEC

NEC AS241W-BK Bedienungsanleitung

NEC

NEC P221W-BK - MultiSync - 22" LCD Monitor Bedienungsanleitung

NEC

NEC MultiSync L182R4 Bedienungsanleitung

NEC

NEC PlasmaSync 50XM3 Bedienungsanleitung

NEC

NEC MULTEOS Series Bedienungsanleitung

NEC

NEC E321 Bedienungsanleitung

NEC

NEC LCD8205 - MultiSync - 82" LCD Flat Panel... Gebrauchs- und Wartungshandbuch

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

LG M1950D-PZ Bedienungsanleitung