NEC MultiSync LCD1535VI Bedienungsanleitung

MultiSync LCD1535VI

User’s Manual

UÏivatelská pﬁíruãka

Bedienerhandbuch

Οδηγίες Χρήσης

Manual del usuario

Manuel Utilisateur

Manuale utente

Gebruikershandleiding

Podr´cznik u˝ytkowinka

Руководство пользователя

Kullan∂c∂ Klavuzu

00Cover_all.p65 11.09.2000, 7:56 Uhr1

English-1

English

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN

EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS

CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE

COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have

sufficient magnitude to cause electric shock. Therefore, it is dangerous to make

any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation

and maintenance of this unit has been included. Therefore, it should be read

carefully in order to avoid any problems.

CAUTION

WARNING

RISK OF ELECTRIC SHOCK • DO NOT OPEN

Caution:

When operating the MultiSync LCD1535VI (LCD1535VI-BK) with a 100-240V AC power

source in Europe, use the power cord provided with the monitor.

In the UK, a BS approved power cord with a moulded plug has a Black (five Amps) fuse

installed for use with this equipment. If a power cord is not supplied with this equipment

please contact your supplier.

When operating the MultiSync LCD1535VI (LCD1535VI-BK) with a 100-240V AC power

source in Australia, use the power cord provided with the monitor.

For all other cases, use a power cord that matches the AC voltage of the power outlet

and has been approved by and complies with the safety standard of your particular

country.

ENERGYSTA R is a U.S. trademark.

As an ENERGYSTA R ®Partner, NEC-Mitsubishi Electronics Display of America, Inc. has

determined that this product meets the ENERGYSTA R guidelines for energy efficiency. The

ENERGYSTA R emblem does not represent EPA endorsement of any product or service.

IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of

International Business Machines Corporation.

Apple and Macintosh are registered trademarks of Apple Computer Inc.

Microsoft and Windows are registered trademarks of the Microsoft Corporation.

NEC is a registered trademark of NEC Corporation.

All other trademarks or registered trademarks are property of their respective owners.

English-2

Declaration

Declaration of the Manufacturer

We hereby certify that the colour monitor

MultiSync LCD1535VI (LCD1535VI-BK)

is in compliance with

Council Directive 73/23/EEC:

– EN 60950

Council Directive 89/336/EEC:

– EN 55022

– EN 61000-3-2

– EN 61000-3-3

– EN 55024

(IEC 61000-4-2)

(IEC 61000-4-3)

(IEC 61000-4-4)

(IEC 61000-4-5)

(IEC 61000-4-6)

(IEC 61000-4-8)

(IEC 61000-4-11)

and marked with

NEC-Mitsubishi Electric Visual Systems, Corp.

MS Shibaura Bldg., 13-23,

Shibaura 4-chome,

Minato-Ku, Tokyo 108-0023, Japan

Power consumption of the monitor is less

than 3 W when in power-saving mode.

English-3

English

For the Customer to use in

U.S.A. or Canada

Canadian Department of Communications

Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du

Règlement sur le matériel brouiller du Canada.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety

Regulations according to CSA C22.2 #950.

Ce produit porte la marque ‘C-UL’ et se conforme aux règlements de

sûrele Canadiens selon CAN/CSA C22.2 No. 950.

FCC Information

1. Use the attached specified cables with the MultiSync LCD1535VI

(LCD1535VI-BK) colour monitor so as not to interfere with radio

and television reception.

(1)The power supply cord you use must have been approved by and

comply with the safety standards of U.S.A. & Europe, and meet

the following condition.

Power supply cord Non shield type, 2-power code

Length conductor(1.8 m)

Plug shape

U.S.A. Europe

(2)Shielded video signal cable. Use of other cables and adapters

may cause interference with radio and television reception.

English-4

2. This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy, and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party

responsible for complicance could void the user‘s authority to

operate the equipment.

If necessary, the user should contact the dealer or an experienced

radio/television technician for additional suggestions. The user may

find the following booklet, prepared by the Federal Communications

Commission, helpful: “How to Identify and Resolve Radio-TV

Interference Problems.” This booklet is available from the U.S.

Government Printing Office, Washington, D.C., 20402,

Stock No. 004-000-00345-4.

Declaration of conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the following

two conditions. (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

U.S. Responsible party: NEC-Mitsubishi Electronics

Display of America, Inc.

Address: 1250 N. Arlington Heights Road

Itasca, Illinois 60143-1248

Tel. No.: (630)467-3000

Type of Product: Computer Monitor

Equipment Classification: Class B Peripheral

Models: M6JNL1501, M6JNL1502

English-5

English

Contents

Your new NEC MultiSync LCD monitor box* should contain the

following:

• MultiSync LCD1535VI(LCD1535VI-BK) monitor with tilt base

• Power Cord

• Video Signal Cable (15-pin mini D-SUB male to DVI-A)

• Video Signal Cable (DVI-D to DVI-D Cable)

• User’s Manual

* Remember to save your original box and packing material to transport

or ship the monitor.

User’s Manual

Video Signal Cable

(15-pin mini D-SUB male to DVI-A)

MultiSync LCD

1535VI

Power Cord (EU)

Video Signal Cable

(DVI-D to DVI-D Cable)

English-6

Quick Start

To attach the MultiSync LCD monitor to your system, follow these

instructions:

1. Turn off the power to your computer.

2. For the PC or Mac with DVI digital output: Connect the DVI-D to

DVI-D signal cable to the connector of the display card in your

system (Figure A.1). Tighten all screws.

For the PC with Analog output: Connect the 15-pin mini D-SUB to

DVI-A signal cable to the connector of the display card in your

system (Figure A.2).

For the Mac: Connect the MultiSync Macintosh cable adapter to the

computer (Figure B.1). Attach the 15-pin mini D-SUB signal cable to

the MultiSync Macintosh cable adapter (Figure B.1).

NOTE: Some Macintosh systems do not require a Macintosh cable

adapter.

3. Remove connector cover. Connect the DVI signal cable to the

connector on the back of the monitor. Place the video signal cable

(Figure C.1).

Replace connector cover.

NOTE: Incorrect cable connections may result in irregular operation,

damage display quality/components of LCD module and/or

shorten the module’s life.

4. Remove connector cover. Connect one end of the power cord to the

AC inlet on the back of the monitor and the other end to the power

outlet (Figure D.1). Replace the connector cover.

5. Press an arrow point “ ” portion with take off connector cover.

NOTE: Please refer to Caution section of this manual for proper

selection of AC power cord.

6. Check the Vacation Switch on the right hand side of the monitor is in

the ON position. Turn on the monitor with the Power Button

(Figure E.1) and the computer.

NOTE: There are two power switches: one on the right side and one

on the front side of the monitor. DO NOT switch on/off quickly.

English-7

English

7. To complete the setup of your MultiSync LCD monitor, use the

following OSM controls:

• Auto Adjust Contrast (Analog input only)

• Auto Adjust (Analog input only)

Refer to the Controls section of this User’s Manual for a full description

of these OSM controls.

NOTE: If you have any problems, please refer to the Troubleshooting

section of this User’s Manual.

Figure B.1

Macintosh Cable

Adapter (not included)

Macintosh G3 and G4 do not

need a Macintosh cable adapter

Figure A.1 Figure A.2

English-8

Figure E.1

Figure C.1

Vacation Switch

Power Button

Connector cord

Press an arrow point “ ”

portion with take off power

cover

Input2

Input1

Figure D.1

Connector Cover

Power Cord

Power Cord(U.S.A)

Power Cord(EU)

English-9

English

Tilt

Grasp both sides of the monitor screen with your hands and adjust the

tilt as desired (Figure F.1).

The movable scope for elevation and depression of LCD is -5°~30°

angle.(Figure F.2).

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1. Disconnect all cables.

2. Place monitor face down on a non-abrasive surface (Place the

screen on a 36 mm platform so that the stand is parallel with the

surface.) (Figure G.1).

3. To take off back cover, please follow the instructions of arrow while

pressing two side of monitor.(Figure G.2)

Next, lift up the stand, dismantle upper cover, then go on to

dismantle the stand cover. (Figure G.3)

Return the stand to its original position, remove the 4 screws that

connect the monitor to the stand, and lift off the stand assembly.

(Figure G.4)

4. Reverse this process to reattach stand.

NOTE: Use only VESA-compatible alternative mounting method.

Figure F. 2Figure F.1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NEC Monitor Handbücher

NEC

NEC PlasmaSync 50XM4 Bedienungsanleitung

NEC

NEC MultiSync LCD3090WQXi Bedienungsanleitung

NEC

NEC M40 - MULTEOS - 40" LCD TV Bedienungsanleitung

NEC

NEC MD212MC - MultiSync - 21.3" LCD Monitor Bedienungsanleitung

NEC

NEC LCD1980SXI - MultiSync - 19" LCD Monitor Bedienungsanleitung

NEC

NEC ASLCD174WXM-BK - AccuSync - 17" LCD Monitor Bedienungsanleitung

NEC

NEC MD205MG-1 - MultiSync - 20.1" LCD Monitor Bedienungs- und Sicherheitshinweise

NEC

NEC MultiSync LCD195WXM Bedienungsanleitung

NEC

NEC P402-TMX4P Beilage

NEC

NEC E461 Bedienungsanleitung

NEC

NEC PlasmaSync 42MP3 Bedienungsanleitung

NEC

NEC S521-AVT Bedienungsanleitung

NEC

NEC MultiSync LCD1970V Bedienungsanleitung

NEC

NEC AccuSync 125F Bedienungsanleitung

NEC

NEC MultiSync LCD400V LA-1422JMW LA-1422JMW Bedienungsanleitung

NEC

NEC MultiSync LCD3090WQXi Bedienungsanleitung

NEC

NEC MultiSync LCD2060NX Bedienungsanleitung

NEC

NEC MultiSync FE750 Administratorhandbuch

NEC

NEC MultiSync EA241WU Bedienungsanleitung

NEC

NEC LCD17V Bedienungsanleitung

NEC

NEC MultiSync LCD4010 Bedienungsanleitung

NEC

NEC NCL-1510 Bedienungsanleitung

NEC

NEC A500 JC-1576VMB Bedienungsanleitung

NEC

NEC E222W - MultiSync - 22" LCD Monitor Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

LG M1950D-PZ Bedienungsanleitung