NEC Nighthawk SX10000D Installations- und Benutzerhandbuch

Visual Systems

SX10000 Installation Data

Desktop and Ceiling

Ver1.6

Page1

Contents

Product Description, Lens Specs, Notes and Formulas Page 1

Projection Distances and Screen Sizes

Desktop Setup Page 2

Ceiling Installation Page 3

Lens Shift Adjustable Range

TL-1ZH, TL-2Z and TL-4Z Lens Page 4

TL-08SF Lens Page 5

Cabinet Dimensions

Front, Bottom & Left Side Page 6

Back, Top & Right Side Page 7

Lens Dimensions Page 8

RS232 Control

Command Codes Page 9

Connection Page 10

Product Description

Type: 3 chip, 0.9" DLP Dimensions: 27.91"(W) x 16.85"(H) x 45.45"(D) w/handles,

Native Resolution: 1280 x 1024 (5:4) w/o lens

Brightness: 8000 ANSI Lumens Weight: 185.3 lbs w/o lens

Power Lens Shift/Power Zoom/Power Focus

Lens Specification

TL-08SF Throw Ratio: 0.84:1 F/#: 3.0 Distortion (full offset): 1% max

Screen Sizes: 80” - 500" (5:4) Lateral color error: 14 µm max

TL-1ZH Throw Ratio: 1.5 - 2.5:1 F/#: 3.0 Distortion (full offset): 2% max

Screen Sizes: 80" - 500" (5:4) Lateral color error: 14 µm max

TL-2Z Throw Ratio: 2.5 - 4.0:1 F/#: 3.0 Distortion (full offset): 2% max

Screen Sizes: 80" - 500" (5:4) Lateral color error: 14 µm max

TL-4Z Throw Ratio: 4.0 - 7.0:1 F/#: 3.0 Distortion (full offset): 2% max

Screen Sizes: 80” - 500" (5:4) Lateral color error: 14 µm max

Notes

• For screen not indicated in the tables, use formulas below.

• If the figures in the tables do not match the results of formulas, use the figures in the tables.

• The ceiling must be strong enough to support the projector and the installation must be in accordance with any local building

codes.

• Distances are in inches, for millimeters multiply by 25.4

• Distances may vary ± 5%.

Formulas

Throw Distance = Screen Width (H) x Lens Magnification H = Screen Width (5:4) H = Screen Height (V) x 5/4

V = Screen Height (5:4) V = Screen Width (H) x 4/5

Screen Diagonal (5:4) = Screen Height (V) x 6.4/4

Note: Image has 5:4 aspect ratio. Take this into account when specifying a screen.

Lens Throw Distance Formula

TL-08SF: H x 0.84

TL-1ZH: (Wide) = H x 1.5 (Tele) = H x 2.5

TL-2Z: (Wide) = H x 2.5 (Tele) = H x 4.0

TL-4Z: (Wide) = H x 4.0 (Tele) = H x 7.0

Note: Do not use TL-1Z lens on SX10000, for optimal performance TL-1ZH should be used for 1.5-2.5:1 range.

Visual Systems

SX10000 Installation Data

Desktop and Ceiling Ver1.6

Page2

Projection Distance and Screen Size for No Offset Installation

The following shows the proper relative positions of the projector and screen.

Dimensions are in inches. For millimeters multiply by 25.4.

Desktop (no offset/optimum condition)

Throw Distance

Lens Offset from

Projector Ctr

1.69"

11.26"

Screen Ctr

Note: Image has 5:4 aspect ratio. Take this into account when specifying a screen.

Note: Do not use TL-1Z lens on SX10000, for optimal performance TL-1ZH should be used for 1.5-2.5:1 range.

Projection Distance

SF Fixed Lens Zoom Lens

TL-08SF TL-1ZH TL-2Z TL-4Z

Width (W) Height (V) 0.84:1 1.5 - 2.5 2.5 - 4.0 4.0 - 7.0

63" 50.4" 52.9 94.5" - 157.5" 157.5" - 252" 252" - 441"

75" 60" 50.4" 112.5" - 187.5" 187.5" - 300" 300" - 525"

90" 72 75.6" 135" - 225" 225" - 360" 360" - 630"

112.5" 90" 94.5" 168.8" - 281.3" 281.3" - 450" 450" - 787.5"

135" 108" 113.4" 202.5" - 337.5" 337.5" - 540" 540" - 945"

157.5" 126" 132.3" 236.3" - 393.8" 393.5" - 630" 630" - 1102.5"

180" 144" 151.2" 270" - 450" 450" - 720" 720" - 1260"

202.5" 162" 170.1" 303.8" - 506.3" 506.3" - 810" 810" - 1417.5"

225" 180" 189" 337.5" - 562.5" 562.5" - 900" 900" - 1575"

262.5" 210" 220.5" 393.8" - 656.3" 656.3" - 1050" 1050" - 1837.5"

300" 240" 252" 450" - 750" 750" - 1200" 1200" - 2100"

337.5" 270" 283.5" 506.3" - 843.8" 843.8" - 1350" 1350" - 2362.5"

375" 300" 315" 562.5" - 937.5" 937.5" - 1500" 1500" - 2625"

Image Size (5:4)

Note: For screen sizes not indicated on the table, use formulas on Page 1

Visual Systems

SX10000 Installation Data

Desktop and Ceiling Ver1.6

Page3

Projection Distance and Screen Size for Ceiling /With Offset

The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of

installation. Dimensions are in inches. For millimeters multiply by 25.4.

Ceiling /With Offset

Throw Distance

Lens Offset from

Projector Ctr

1.69"

Screen Ctr

Vertical Offset

Note: Image has 5:4 aspect ratio. Take this into account when specifying a screen.

Note: Do not use TL-1Z lens on SX10000, for optimal performance TL-1ZH should be used for 1.5-2.5:1 range.

Projection Distance

SF Fixed Lens Zoom Lens

TL-08SF TL-1ZH TL-2Z TL-4Z

Width (W) Height (V) 0.84:1 1.5 - 2.5 2.5 - 4.0 4.0 - 7.0

63" 50.4" 52.9 94.5" - 157.5" 157.5" - 252" 252" - 441"

75" 60" 50.4" 112.5" - 187.5" 187.5" - 300" 300" - 525"

90" 72 75.6" 135" - 225" 225" - 360" 360" - 630"

112.5" 90" 94.5" 168.8" - 281.3" 281.3" - 450" 450" - 787.5"

135" 108" 113.4" 202.5" - 337.5" 337.5" - 540" 540" - 945"

157.5" 126" 132.3" 236.3" - 393.8" 393.5" - 630" 630" - 1102.5"

180" 144" 151.2" 270" - 450" 450" - 720" 720" - 1260"

202.5" 162" 170.1" 303.8" - 506.3" 506.3" - 810" 810" - 1417.5"

225" 180" 189" 337.5" - 562.5" 562.5" - 900" 900" - 1575"

262.5" 210" 220.5" 393.8" - 656.3" 656.3" - 1050" 1050" - 1837.5"

300" 240" 252" 450" - 750" 750" - 1200" 1200" - 2100"

337.5" 270" 283.5" 506.3" - 843.8" 843.8" - 1350" 1350" - 2362.5"

375" 300" 315" 562.5" - 937.5" 937.5" - 1500" 1500" - 2625"

Image Size (5:4)

Note: For screen sizes not indicated on the table, use formulas on Page 1

Visual Systems

SX10000 Installation Data

Desktop and Ceiling Ver1.6

Page4

Lens Shift Adjustable Range

Lens Shift Adjustable Range for Desktop and Ceiling Application.

The diagram below shows the location of the image position in the lens. The lens can be shifted within the shaded area as shown

using the normal projection position as a starting point.

Maximum Possible Range for TL-1ZH, TL-2Z and TL-4Z

Maximum Possible Range:

Up: 0.41V

Down: 0.24V (only if image is shifted right first)

Right: 0.28H

Left: 0.19H (only if image is shifted up first)

Normal Position

0.41V

Desktop/Front

Vertical

Max.

Note: There is a mechanical limitation to shift down without

first shifting right, and left without first shifting up. (Refer to

diagram)

H: width of projected image

V: height of projected image (5:4)

0.28H0.19H

0.41V

0.24V

Normal Projection

position

Maximum Possible Range:

Up: 0.24V (only of image is shifted left first)

Down: 0.41V

Right: 0.19H (only if image is shifted down first)

Left: 0.28H

0.41V

Normal Position

Ceiling/Front

Vertical

Max.

Note: There is a mechanical limitation to shift up without first

shifting left, and right without first shifting down. (Refer to

diagram)

H: width of projected image

V: height of projected image (5:4)

Normal Projection

0.24V

0.41V

0.28H 0.19H

position

Visual Systems

SX10000 Installation Data

Desktop and Ceiling Ver1.6

Page5

Lens Shift Adjustable Range (Cont.)

Lens Shift Adjustable Range for Desktop and Ceiling Application.

The diagram below shows the location of the image position in the lens. The lens can be shifted within the shaded area as shown

using the normal projection position as a starting point.

Fixed Lens TL-08SF

Maximum Possible Range:

Up: 0.09V

Down: 0.09V

Right: 0.06H

Left: 0.06H

Normal Position

Max. 0.15V

Desktop/Front

Vertical

Note: There is a mechanical limitation to shift down without

first shifting right, and left without first shifting up. (Refer to

diagram)

H: width of projected image

V: height of projected image (5:4)

0.06H 0.06H

0.09V

Normal Projection

position

Note: To reduce the distortion of an image, it is recommended that the projector is horizontally positioned at a projection

angle of 0 degrees.

Visual Systems

SX10000 Installation Data

Desktop and Ceiling

4.72

4.72 11.81

1.69

16.02

24.65

8.90

1.69

2.36 14.17 0.315

1.99

32.91

8-M10*L20

Ver1.6

Page6

Cabinet Dimensions

The following drawings show the cabinet dimensions for the SX10000.

Dimensions are in inches. For millimeters multiply by 25.4.

Visual Systems

SX10000 Installation Data

Desktop and Ceiling

2.05

1.69

38.31

26.77

3.21 3.93

0.57

Ver1.6

Page7

Cabinet Dimensions (continued)

The following drawings show the cabinet dimensions for the SX10000.

Dimensions are in inches. For millimeters multiply by 25.4.

Visual Systems

SX10000 Installation Data

Desktop and Ceiling

2.70

4.14

4.36

6.47

Ø5.91

Ø4.67

Ø8.19

Ø4.72

Ver1.6

Page8

Lens Dimensions

The following drawings show the lenses mounted on the projector.

Dimensions are in inches. For millimeters multiply by 25.4.

TL-2Z 2.5-4.0:1 Zoom Lens

TL-4Z 4.0-7.0:1 Zoom Lens

TL-08SF 0.84:1 Fixed Lens

TL-1ZH 1.5-2.5:1 Zoom Lens

Visual Systems

SX10000 Installation Data

Desktop and Ceiling Ver1.6

Page9

RS232 Control / Command Codes

Standalone operation HEX CODE

POWER ON: 02 00 00 00 00 02

POWER OFF: 02 01 00 00 00 03

Input 1 RGB 1: 02 03 00 00 02 01 01 09

Input 2 RGB 2: 02 03 00 00 02 01 02 0A

Input 3 RGB 3: 02 03 00 00 02 01 03 0B

Input 4 COMPONENT: 02 03 00 00 02 01 12 1A

Input 5 VIDEO 1: 02 03 00 00 02 01 06 0E

Input 6 VIDEO 2: 02 03 00 00 02 01 07 0F

Input 7 S-VIDEO 1: 02 03 00 00 02 01 0B 13

Input 8 S-VIDEO 2: 02 03 00 00 02 01 0C 14

Input 9 RGB DIGITAL: 02 03 00 00 02 01 1A 22

Input 0 SDI: 02 03 00 00 02 01 1B 23

PICTURE MUTE ON: 02 10 00 00 00 12

PICTURE MUTE OFF: 02 11 00 00 00 13

DISPLAY MUTE ON: 02 14 00 00 00 16

DISPLAY MUTE OFF: 02 15 00 00 00 17

LENS SHUTTER ON: 02 16 00 00 00 18

LENS SHUTTER OFF: 02 17 00 00 00 19

LAMP AUTO: 03 88 00 00 02 0B 00 98

HIGH-BRIGHT: 03 88 00 00 02 0B 01 99

VARIABLE: 03 88 00 00 02 0B 02 9A

PICTURE

BRIGHT 03 10 00 00 05 00 FF 00 Lower Upper CKS

Adustment Value from FFE1(min) to 001F(max).

CONTRAST 03 10 00 00 05 01 FF 00 Lower Upper CKS

Adustment Value from FFE1(min) to 001F(max).

COLOR 03 10 00 00 05 02 FF 00 Value 00 CKS

Adustment Value from 00(min) to 5F(max).

HUE 03 10 00 00 05 03 FF 00 Value 00 CKS

Adustment Value from 00(min) to 3C(max).

SHARPNESS 03 10 00 00 05 04 FF 00 Value 00 CKS

Adustment Value from 00(min) to 0F(max).

V-APERTURE 03 10 00 00 05 1D FF 00 Value 00 CKS

Adustment Value from 00(min) to 0F(max).

Lower : Lower byte of Value, Upper : Upper byte of Value

CKS : Check Sum

Lower eight bits digits of sum total of the first byte to the byte just before the last.

The unit address is not checked when the unit ID has become a general notification.

Please set "0" to the unit ID and set "00" to the unit address when you use the projector under the standalone mode.

Visual Systems

SX10000 Installation Data

Desktop and Ceiling Ver1.6

Page10

RS232 Control / Connection

Cable Connection

Communication Protocol

Baud rate: 4800/9600/19200/38400 bps (selectable)

Data length: 8 bits

Parity: No parity

Stop bit : 1 bit

X on/off: None

Communication procedure: Full duplex

Note: For cable lengths longer than 20’, it is recommended changing baud rate to 9600 bps.

PC Control Connector (D-Sub 9P)

To GND of PC

To TxD of PC To RxD of PC

To CTS of PC To RTS of PC

12345

67 89

Note: Jumper "Request to Send" and "Clear to Send" together on both ends of the cable to simplify cable connection.

Andere Handbücher für Nighthawk SX10000D

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NEC Projektor Handbücher

NEC

NEC NP1000 Bedienungsanleitung

NEC

NEC MultiSync MT1055 Installations- und Benutzerhandbuch

NEC

NEC NP4100W - WXGA DLP Projector Bedienungsanleitung

NEC

NEC NP1200 Series Bedienungsanleitung

NEC

NEC V230X Bedienungsanleitung

NEC

NEC P502H Bedienungsanleitung

NEC

NEC INFOCOMM05PROJECTOR Bedienungsanleitung

NEC

NEC NP-PH1000U Bedienungsanleitung

NEC

NEC LT265 - INSTALLTION GUIDE Montage- und Wartungsanleitung

NEC

NEC NP110 - SVGA DLP Projector Bedienungsanleitung

NEC

NEC NEC L51W LED Handbuch

NEC

NEC LT220 Series Bedienungsanleitung

NEC

NEC NC1700L Bedienungsanleitung

NEC

NEC MultiSync VT540JK Bedienungsanleitung

NEC

NEC PX1005QL-W Bedienungsanleitung

NEC

NEC VT460 Bedienungsanleitung

NEC

NEC VT49 Series Bedienungsanleitung

NEC

NEC UM361XI Bedienungsanleitung

NEC

NEC U300X Series Bedienungsanleitung

NEC

NEC MultiSync MT1050 Installations- und Benutzerhandbuch

NEC

NEC LT150Z - MultiSync XGA DLP Projector Bedienungsanleitung

NEC

NEC NP-M300WS Bedienungsanleitung

NEC

NEC NP-M271X Bedienungsanleitung

NEC

NEC LT157 - XGA LCD Projector Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung