NEC WT610E Bedienungsanleitung

1. PROJECTOR PLACEMENT

Place projector on table in front of screen or

wall which will be used for displaying image.

2. OPENING THE MIRROR

Unlock mirror cover lock switch and open

top mirror door to the open position (figure 1).

3. CONNECTING THE POWER

Plug power cord into projector and AC outlet.

(See Figure 1 for AC Power connection.)

4. TURNING ON THE WT610E

Turn on the main power to the projector; press the PROJECTOR POWER

SWITCH (figure1) to the on position. Press the POWER (ON/STAND BY)

button on the projector cabinet (figure 2) or POWER ON button on the

remote control (figure 5) for a minimum of 2 seconds, when the POWER

INDICATOR turns a steady green the projector is ready to use.

5.PROJECTOR PLACEMENT FOR PROPER SCREEN SIZE

Move projector closer or farther away from screen to fit the width of the

screen or desired size. Maximum screen size is 100” diagonal. NOTE as the

size of the image increases or decreases the displayed vertical image position shifts

depending on screen size (figure 3). Smaller images will have less vertical image

shiftthan larger screen sizes.; you will need to adjust screen height to

accommodate this shift. The distance between the projector and display surface

cannot be changed without changing image size.

CONTINUED ON REVERSE SIDE...

Quick Set-up Guide

WT610E short throw projector

POWER

BUTTON

"MENU

BUTTON

STEP-BY-STEP PROJECTOR PLACEMENT FOR FRONT SCREEN TABLE TOP USE

PROJECTOR

POWER SWITCH

AC POWER

INLET

TOP MIRROR

DOOR

COVER

LOCK

SWITCH

FIGURE 1

FIGURE 2

FIGURE 3

Diagonal Width(W) Height(H)

inches inches inches inches inches inches

40 32 24 26.0 2.5 14.0

60 48 36 37.0 10.3 19.0

67 53.6 40.2 40.8 13.1 20.7

72 57.6 43.2 43.6 15.0 22.0

84 67.2 50.4 50.2 19.7 25.0

90 72 54 53.5 22.0 26.5

100 80 60 59.0 25.9 29.0

Image Size (4:3) BCD

(4:3)

Diagonal Width(W) Height(H)

inches inches inches inches inches inches

37 32 18 26.0 2.5 17.0

40 35 19.7 28.0 4.0 18.2

83 72 40.5 53.5 22.0 33.2

92 80 45 59.0 25.9 36.5

D(16:9)

Image Size (16:9) BC

B Vertical distance between the bottom of the projector and the screen center

CThrowdistance

DVertical distance between the bottom of the projector and screen bottom

(screen top for ceiling mounted application)

NEC 090613

For more information, call 1.800.NEC.INFO or visit www.necvisualsystems.com

NEC is a registered trademark of NEC Corporation. All other trademarks are the property of their

respective owners. All specifications subject to change without notice.

NEC Corporation of America

Visual Systems Division

1250 Arlington Heights Rd., Suite 400

Itasca, IL 60143-1248

6. SQUARING THE PROJECTOR

TO THE PROJECTOR SURFACE

Projector needs to be in the horizontal center of the screen and

parallel to the screen, this is a very important step to a square image

(figure 4).

7. REMOTE CONTROL NAVIGATION

Next using the remote or top control panel select “MENU” (figure 2

&5). From the on-screen menu select “SET-UP” then “TILT

INDICATOR”.

8. MAKING SURE THE WT610E IS

LEVEL WITH THE SURFACE IT IS ON

Check Tilt Indicator to see if projector is level. If projector needs to be

leveled use the four projector feet (figure 6) to adjust until both tilt

indicator's slider are centered. Tilting the projector will move the Tilt

Indicator’sslider to the leftor right accordingly.Tilt the projector so

that both of the sliders of “Back/Front” and “Left/Right” are shown at

the center.When the slider reaches the center,it will become green.

This means the projector is level with the surface it is on.

9. ADJUSTING PROJECTOR KEYSTONE AND FOCUS

Since both affect one another it may be necessary to repeat focus

and keystone adjustments until image is square and focused.

a. Bring up test pattern “MENU” • “SOURCE” •“TEST PATTERN”

b. Adjust focus using the keyson remote control or projector

cabinet until test pattern is clear

c. Adjust keystone “MENU” • “SOURCE” • “KEYSTONE” until

image is square

d. Repeat steps b and c until image is acceptable

e. If focus is acceptable but image is not square go back to step

6and check projector level

10.PRESENT

You are now ready to begin projecting an image. Plug in VGA

cable to projector and laptop,select input source and PRESENT!

FIGURE 4

DOWN

FIGURE 6

FIGURE 5

POWER ON

Andere Handbücher für WT610E

Andere NEC Projektor Handbücher

NEC

NEC MT1035 - MultiSync XGA LCD Projector Bedienungsanleitung

NEC

NEC CONTESTPRESSRELEASE8.06FINAL Bedienungsanleitung

NEC

NEC PE401H Bedienungsanleitung

NEC

NEC P502HL-2 Bedienungsanleitung

NEC

NEC VT47 Series Bedienungsanleitung

NEC

NEC LT75Z - MultiSync SVGA DLP Projector Montageanleitung

NEC

NEC MultiSync MT810 Bedienungsanleitung

NEC

NEC NP60 - CEILING PLATE Bedienungsanleitung

NEC

NEC P350W Series Bedienungsanleitung

NEC

NEC NP-P350W Bedienungsanleitung

NEC

NEC MultiSync MT840 Montageanleitung

NEC

NEC PE456USL Bedienungsanleitung

NEC

NEC PG-6200 Bedienungsanleitung

NEC

NEC VE303 Bedienungsanleitung

NEC

NEC MultiSync SX4000 Bedienungsanleitung

NEC

NEC PX1004UL-WH Bedienungsanleitung

NEC

NEC VT595 Series Bedienungsanleitung

NEC

NEC NP40 Bedienungsanleitung

NEC

NEC PA622U Bedienungsanleitung

NEC

NEC NC1700L Bedienungsanleitung

NEC

NEC MultiSync MT1040 Bedienungsanleitung

NEC

NEC LCDMT1050 Installations- und Benutzerhandbuch

NEC

NEC VT670 Series Bedienungsanleitung

NEC

NEC NC900C Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung