NEC WT615 Series Bedienungsanleitung

NEC Projector

WT615/WT610

Wired and Wireless Network Setup Guide

1. What You Can Do with User

Supportware 2

2. Operating Environment

3. Attaching LAN Card

4. Setting the LAN Setting of

Projector

5. Setting the LAN Setting of

Personal Computer

([Example] Wireless LAN of

Windows XP:

Ad Hoc connection)

6. Refer to "User’s Guide" and

Help

Install in the PC the software stored in the User Supportware 2 CD-ROM.

This manual describes the LAN settings to use the software programs included in

the supplied User Supportware 2 CD-ROM. For how to operate each software pro-

gram, refer to "User’s Guide" (PDF) on User Supportware 2 CD-ROM.

UNLOCK

MIRROR

LOCK

nwguidej0808.book1ページ２００７年３月１４日水曜日午後５時３７分

Introduction

Thank you for purchasing the NEC projector WT615/WT610 (hereafter referred to as the

"WT615/WT610" or "projector").

The projector is equipped with the following features so that you can give effective presenta-

tions.

• USB port (type A/type B), PC card slot (TYPE II)*1 supplied as standard*1

• Viewer that displays images from a flash memory card and USB memory

• Wireless LAN card supplied as an option*2

*1 A commercially available flash memory card, commercially available wired LAN card, or NEC’s optional wire-

less LAN card (NWL-100 series) can be used through the PC card slot on this projector.

*2 For a list of countries where NEC's optional wireless LAN card (NWL-100 series) is available, refer to the Ser-

vice Page for NEC Projectors (http://www.nec-pj.com).

The projector is also supplied with User Supportware 2 CD-ROM in which five programs of

software are stored for effective use of these features. The software stored on this CD-

ROM are as follows.

Each program runs on Windows XP and Windows 2000.

Install in the PC the software in the User Supportware 2 CD-ROM before using.

• Image Express Utility 2.0

• Desktop Control Utility 1.0

• Ulead Photo Explorer 8.0 SE Basic

• Viewer PPT Converter 3.0

• PC Control Utility 3.0

This document explains how to configure the LAN settings to use the above software pro-

grams. For details of operations, refer to "User Supportware 2 User's Guide" on User Sup-

portware 2 CD-ROM and help function of the software.

For the network settings on the personal computer, refer to the User's Manual for the per-

sonal computer or the peripheral equipment for the network.

Use a wireless LAN card conforming to the Wi-Fi standard for your personal computer.

NOTES

(1) The contents of this guide may not be reprinted in part or whole without permission.

(2) The contents of this guide are subject to change without notice.

(3) Great care has been taken in the preparation of this guide; however, should you notice

any questionable points, errors or omissions, please contact us.

(4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit

or other matters deemed to result from using the Projector.

(5) Guides with incorrect collating or missing pages will be replaced.

nwguidej0808.book2ページ２００７年３月１４日水曜日午後５時３７分

Cautions on Usage

• A wireless LAN card is not meant for use with facilities or equipment involving the safe-

guard of human life, such as medical equipment, nuclear facilities or equipment, aeronau-

tical or space equipment, transportation facilities or equipment, etc., or with facilities or

equipment requiring high levels of reliability. Do not use the card in such cases.

• Do not use a wireless LAN card near cardiac pacemakers.

• Do not use a wireless LAN card near medical equipment. Doing so may cause electro-

magnetic interference with the medical equipment, possible leading to death.

• Do not disassemble or modify a wireless LAN card in any way. Doing so could lead to fire

or electric shock.

• Do not use a wireless LAN card in wet or moist places, such as in bathrooms or near

humidifiers. Doing so could lead to fire, electric shock or malfunctions.

To prevent damage due to static electricity, eliminate any static electricity from your body

before touching a wireless LAN card.

• Static electricity from the human body may damage a wireless LAN card. Before touching

the card, touch an aluminum window frame, a door knob, or some other metal object

around you to eliminate the static electricity.

The radio waves used by a wireless LAN card pass through the wood or glass used in nor-

mal homes (but not through window panes with built-in metallic mesh).

The radio waves do not pass through iron reinforcing bars, metal or concrete, so a wireless

LAN card cannot be used for communicating through walls or floors made with these mate-

rials.

nwguidej0808.book1ページ２００７年３月１４日水曜日午後５時３７分

Contents

Introduction • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Inside cover

Cautions on Usage • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1

Contents • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 2

1. What You Can Do with User Supportware 2 • • • • • • • • • • • • • 3

1-1. Image Express Utility 2.0• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3

1-2. Desktop Control Utility 1.0 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5

1-3. Ulead Photo Explorer 8.0 SE Basic• • • • • • • • • • • • • • • • • • • • • • • • 6

1-4. Viewer PPT Converter 3.0• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7

1-5. PC Control Utility 3.0 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7

2. Operating Environment • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8

2-1. Supported Projector • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 8

2-2. Operating Environment • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9

3. Attaching LAN Card • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 10

4. Setting the LAN Setting of Projector • • • • • • • • • • • • • • • • • • 12

4-1. Displaying On-Screen Menu (LAN Mode) • • • • • • • • • • • • • • • • • • 12

4-2. Wired LAN • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 14

4-3. Wireless LAN• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 18

5. Setting the LAN Setting of Personal Computer

([Example] Wireless LAN of Windows XP:Ad Hoc connection) • • • • • 25

6. Refer to "User’s Guide" and Help • • • • • • • • • • • • • • • • • • • • 30

6-1. Displaying "User’s Guide" (PDF) • • • • • • • • • • • • • • • • • • • • • • • • 30

6-2. Using Help • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 32

nwguidej0808.book2ページ２００７年３月１４日水曜日午後５時３７分

1. What You Can Do with User Supportware 2

What You Can Do with User Supportware 2

1. What You Can Do with User Supportware 2

Image Express Utility 2.0 is a software tool used to send the screen of your personal com-

puter to the projector via a network, without the signal cables.

zHigh-speed, high-quality image transmissions based on NEC's original

compression algorithm

NEC's original compression algorithm allows high-quality images to be sent over the net-

work at high speed, from your personal computer to the projector.

zSimultaneous projection by multiple projectors

Images can be sent from a personal computer to not only one projector but also to two or

more projectors at the same time.

z"Easy Connection" function for connecting wireless LAN

By using "Easy Connection" function*1, the complicated setting of wireless LAN can be

simplified.

*1 This function can be used when Windows XP is used as the OS and when you have a "Computer Administra-

tor" privilege. The communication mode is set to "802.11 Ad Hoc".

The "Easy Connection" function cannot be used with Windows 2000.

1-1. Image Express Utility 2.0

UNLOCK

MIRROR

LOCK

UNLOCK

MIRROR

LOCK

UNLOCK

MIRROR

LOCK

nwguidej0808.book3ページ２００７年３月１４日水曜日午後５時３７分

1. What You Can Do with User Supportware 2

zProjected images can be transferred and saved to personal computers.

When "Meeting Mode" is used, projected images can be sent to the personal computers

of all the participants (attendants) of a "Meeting". The received images can be saved to

your personal computer with a memo (text data) attached.

z1-click switching of presenter

When switching to another presenter during the conference, the participants (attendants)

can simply click a button to switch over to the new presenter.

zCentral management of the projecting personal computer

Using the Training Mode allows you to use a single personal computer (Manager) to

manage which personal computer (Attendant) projects. Possible operation includes

switching projecting personal computers to project from, as well as temporarily terminat-

ing communication with the projector.

Attendant

Presenter

ttendant

UNLOCK

MIRROR

LOCK

ttendant A Attendant D (presenter)

Attendant B Attendant C

Manager

Mr. D, please start

your presentation.

UNLOCK

MIRROR

LOCK

The Training Mode is not installed via the "Typical" installation option when Image

Express Utility 2.0 is installed.

To use Training Mode, select "Extension" installation option on the install selection

screen that is displayed while Image Express Utility 2.0 installation is in progress,

and select "Training Mode (Attendant)" or "Training Mode (Manager)".

nwguidej0808.book4ページ２００７年３月１４日水曜日午後５時３７分

1. What You Can Do with User Supportware 2

What You Can Do with User Supportware 2

Desktop Control Utility 1.0 is software that operates the desktop screen of a personal com-

puter at a remote location from the projector by using a network.

zA commercially available USB mouse is connected to the projector to operate the per-

sonal computer.

zSuppose, for example, a PowerPoint file to be presented in a conference is saved to a

personal computer in your office. If this personal computer is connected to the projector

in the conference room with LAN when the conference is held, the desktop screen of the

personal computer in your office (Windows 2000/XP) can be projected and the Power-

Point file can be presented by operating the projector. In other words the personal com-

puter does not need to be brought into the conference room.

1-2. Desktop Control Utility 1.0

UNLOCK

MIRROR

LOCK

Office

Conference room

Important

•You can use the Desktop Control Utility 1.0 to operate a personal computer located in a

separate room from the projector over a network. Therefore, care must be exercised to

prevent any third party from viewing the screen of your personal computer (important

documents), copying files, or turning off the power.

NEC assumes no liability for any loss or damages arising from information leak or sys-

tem failure while you are using Desktop Control Utility 1.0.

•In the Windows operating system, click [Control Panel] →[Performance and Mainte-

nance] → [Power Options] →[System Standby] →[Never]. This will disconnect LAN

connection when the personal computer goes in the standby mode while the Desktop

Control Utility 1.0 is being used.

•The screen saver function is off while Desktop Control Utility 1.0 is running.

nwguidej0808.book5ページ２００７年３月１４日水曜日午後５時３７分

1. What You Can Do with User Supportware 2

Ulead Photo Explorer 8.0 SE Basic (hereafter referred to as "Ulead Photo Explorer 8.0") is a

multimedia image file management tool developed by Ulead Systems, Inc. This tool has

functions to capture images from a digital camera or scanner and to process or edit images,

as well as image file management functions. In addition, slideshows and screen savers can

also be easily created.

zUlead Photo Explorer 8.0 in the User Supportware 2 CD-ROM has functions that allow

you to use the projector more conveniently, in addition to the functions that come with the

software, for when an NEC projector is connected.

Additional functions are listed below.

For details of each function, refer to the help function of Ulead Photo Explorer 8.0.

•Image transmission

Sends images to the projector.

•PowerPoint file conversion

Converts a PowerPoint file into an image file.

•Logo transfer

Registers an image file as the logo data of the projector.

•Capture

Saves the screens of the personal computer as image files.

•Slideshow start

Sends the image of a slideshow to the projector and executes the slideshow on the

projector.

•Viewer output

Converts a slideshow into an index file that can be played back by the viewer func-

tion of the projector and outputs the index file.

•Communication setting (connection destination selection)

Sets up communication to connect the projector.

zThe personal computer and projector may be connected with wired LAN, wireless LAN,

or a serial cable.

1-3. Ulead Photo Explorer 8.0 SE Basic

nwguidej0808.book6ページ２００７年３月１４日水曜日午後５時３７分

1. What You Can Do with User Supportware 2

What You Can Do with User Supportware 2

Viewer PPT Converter 3.0 is software that converts files created with PowerPoint 95/97/

2000/2002/2003 into an index file that can be displayed with the viewer function of the pro-

jector.

zWhen converting, specify a flash memory card or USB memory as the destination to

which the index file is to be saved. Then you can easily make your presentation by sim-

ply inserting the flash memory card or USB memory into the projector (viewer function of

the projector).

zIf PowerPoint 2000/2002/2003 is installed in your personal computer, you can activate

Viewer PPT Converter 3.0 from PowerPoint (PPT Converter add-in is automatically reg-

istered to PowerPoint).

PC Control Utility 3.0 is software that allows you to operate the projector from the personal

computer when the personal computer and the projector are connected with LAN (wired or

wireless) or a serial cable.

zYou can operate the projector as follows from your personal computer.

For details of each function, refer to the help function of PC Control Utility 3.0.

• Power on/off

• Input signal switching

• Muting (temporarily disabling audio/video)

• Freezing (locking the projected image)

• Logo image transmission

1-4. Viewer PPT Converter 3.0

1-5. PC Control Utility 3.0

nwguidej0808.book7ページ２００７年３月１４日水曜日午後５時３７分

2. Operating Environment

User Supportware 2 supports the following NEC projector (as of January 2005)

LT Series LT265*1/LT245*1

WT Series WT615/WT610

*1: Comes standard with a LAN port (RJ-45).

•For wireless connection.

•Use the separately available NEC’s optional wireless LAN card (NWL-100 series).

•Use a Wi-Fi compliant wireless LAN adapter for the personal computer.

•If connecting multiple personal computer and projectors, use NEC's optional wireless

LAN card (NWL-100 series) on the personal computers for better transmission quality.

•For a list of countries where NEC's optional wireless LAN card (NWL-100 series) is avail-

able, refer to the Service Page for NEC Projectors (http://www.nec-pj.com).

•For wired connection.

•For information on supported LAN cards for this projector, refer to the Service Page for

NEC Projectors (http://www.nec-pj.com).

PC Control Utility 3.0 can be used with projectors other than the above projectors. For

details, refer to the help function of PC Control Utility 3.0.

2-1. Supported Projector

nwguidej0808.book8ページ２００７年３月１４日水曜日午後５時３７分

Andere Handbücher für WT615 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere NEC Projektor Handbücher

NEC

NEC PA600X Series Bedienungsanleitung

NEC

NEC PA500U Series Bedienungsanleitung

NEC

NEC NP500 EDU Handbuch

NEC

NEC U300X Series Bedienungsanleitung

NEC

NEC MultiSync MT1040 Bedienungsanleitung

NEC

NEC PA500U Series Bedienungsanleitung

NEC

NEC DLP CINEMA NC1600C Bedienungsanleitung

NEC

NEC PH1202HL Bedienungsanleitung

NEC

NEC NP3200 Bedienungsanleitung

NEC

NEC MultiSync VT540JK Bedienungsanleitung

NEC

NEC NP2200 Series Bedienungsanleitung

NEC

NEC MT1065 - MultiSync XGA LCD Projector Bedienungsanleitung

NEC

NEC PA622U Bedienungsanleitung

NEC

NEC GT6000R - SXGA+ LCD Projector Bedienungsanleitung

NEC

NEC HT1000 Series Bedienungsanleitung

NEC

NEC VT49 Series Bedienungsanleitung

NEC

NEC NP-PX800X Bedienungsanleitung

NEC

NEC NP600 Series Bedienungsanleitung

NEC

NEC NP-VE281 Bedienungsanleitung

NEC

NEC UM280X Bedienungsanleitung

NEC

NEC LCDMT800 Bedienungsanleitung

NEC

NEC WT Bedienungsanleitung

NEC

NEC LT50 - Bedienungsanleitung

NEC

NEC NP2000 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung