NEC SX-Aurora TSUBASA A300-4 Bedienungsanleitung

SX-Aurora TSUBASA

A300-4

USER’S GUIDE

Revision 1.0b

The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The vendor assumes

no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update

or to keep current the information in this Guide, or to notify any person or organization of the updates.

Please Note: For the most up-to-date version of this Guide, please see our website at

http://www.nec.com/en/global/prod/hpc/aurora/document/ .

NEC Corporation ("NEC") reserves the right to make changes to the product described in this Guide at any time and

without notice. This product, including software and documentation, is the property of NEC and/ or its licensors, and is

supplied only under a license. Any use or reproduction of this product is not allowed, except as expressly permitted

by the terms of said license.

IN NO EVENT WILL NEC CORPORATION. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVEORCONSEQUENTIALDAMAGESARISINGFROMTHEUSEORINABILITYTOUSETHISPRODUCT

OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, NEC

CORPORATION. SHALL NOT HAVELIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATASTORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR

RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

The products sold by NEC are not intended for and will not be used in life support systems, medical equipment, nuclear

facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems

whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property

damage. Accordingly, NEC disclaims any and all liability, and should buyer use or sell such products for use in such

ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend

and hold NEC harmless for and against any and all claims, demands, actions, litigation, and proceedings of any kind

arising out of or related to such ultra-hazardous use or sale.

Guide Revision 1.0

Release Date: Feb. 28, 2018

Unless you request and receive written permission from NEC Corporation., you may not copy any part of this document.

Information in this document is subject to change without notice. Other products and companies referred to herein are

trademarks or registered trademarks of their respective companies or mark holders.

SX-Aurora TSUBASA A300-4 User’s Guide

Preface

About this Guide

This Guide is written for professional system integrators and PC technicians. It provides

information for the installation and use of the SX-Aurora TSUBASA A300-4. Installation and

maintenance should be performed by experienced technicians only.

Please refer to the A300-4 server specifications page on our website for updates on supported

memory, processors and operating systems (http://www.nec.com/en/global/prod/hpc/aurora/document/).

Notes

For your system to work properly, please follow the links below to download all necessary

drivers/utilities and the user’s guide for your server.

•

NEC product manuals: http://www.nec.com/en/global/prod/hpc/aurora/document/

•

Product safety info:

http://www.nec.com/en/global/prod/hpc/aurora/document/safety_information.pdf

This Guide may be periodically updated without notice. Please check the NECwebsite for

possible updates to the manual revision level.

Warnings

Special attention should be given to the following symbols used in this manual.

Warning! Indicates important information given to prevent equipment/property damage

or personal injury.

Warning! Indicates high voltage may be encountered when performing a procedure.

Preface

Table of Contents

Chapter 1 Introduction

1.1 Overview.............................................................................................................................5

1.2 Unpacking the System........................................................................................................5

1.3 System Features.................................................................................................................6

1.4 Server Chassis Features ....................................................................................................7

Control Panel.....................................................................................................................7

Front Features...................................................................................................................8

Rear Features....................................................................................................................9

1.5 System Block Diagram......................................................................................................10

1.6 Ports .................................................................................................................................11

1.7 LED Indicators..................................................................................................................12

Chapter 2 Server Installation

2.1 Overview...........................................................................................................................13

2.2 Preparing for Setup...........................................................................................................13

Choosing a Setup Location .............................................................................................13

Rack Precautions.............................................................................................................13

Server Precautions..........................................................................................................14

Rack Mounting Considerations........................................................................................14

2.3 Installing the Rails.............................................................................................................16

Identifying the Rails.........................................................................................................16

Releasing the Inner Rail..................................................................................................17

Installing The Inner Rails on the Chassis........................................................................18

Installing the Outer Rails on the Rack.............................................................................19

Installing the System into the Rack .................................................................................20

Removing the System From the Rack.............................................................................21

Removing the Outer Rails From the Rack.......................................................................22

Chapter 3 Maintenance and BIOS Setting

3.1 Overview...........................................................................................................................23

Appendix A BIOS Error Codes

Appendix B Standardized Warning Statements for AC Systems

Chapter 1: Introduction

Chapter 1

Introduction

1.1 Overview

This chapter provides a brief outline of the functions and features of the SX-Aurora TSUBASA

A300-4.

1.2 Unpacking the System

Inspect the box the SX-Aurora TSUBASA A300-4 was shipped in and note if it was damaged

in any way. If any equipment appears damaged, please file a damage claim with the carrier

who delivered it.

Decide on a suitable location for the rack unit that will hold the server. It should be situated in

a clean, dust-free area that is well ventilated. Avoid areas where heat, electrical noise and

electromagnetic fields are generated. It will also require a grounded AC power outlet nearby.

Be sure to read the precautions and considerations noted in Appendix B.

SX-Aurora TSUBASA A300-4 User’s Guide

1.3 System Features

The following table provides you with an overview of the main features of the

SX-Aurora TSUBASA A300-4. Please refer to Appendix C for additional specifications.

System Features

Motherboard

Supermicro X11DGQ

Chassis

Supermicro SC118GQETS-R2K05P2

CPU

Supports dual Intel Xeon 6148/6126/4108 series (Socket P0-LGA3647) processors

Socket Type

Socket P0-LGA3647

Memory

96GB or 192GB

Chipset

PCH C621

PCIe Cards

Up to four Vector Engine 1.0 cards

Up to two InfiniBand HCA cards

Hard Drives

one fixed 2.5" internal drive

Power

2000W redundant power supply modules *

Form Factor

1U rackmount

Dimensions

(WxHxD) 17.2 x 1.7 x 35.2 in. (437 x 43 x 894 mm)

Host Server

A300-4-VH

*Two power supplies are required. This negates the power redundancy feature.

Chapter 1: Introduction

1.4 Server Chassis Features

Control Panel

The switches and LEDs located on the control panel are described below.

Figure 1-1. Control Panel View

Control Panel Features

Item

Feature

Description

Information LED

See table on the following page.

NIC2 LED

Indicates network activity on the LAN2 port when flashing

NIC1 LED

Indicates network activity on the LAN1 port when flashing

HDD LED

Indicates activity on the hard drive when flashing

Power LED

Indicates power is being supplied to the system power supply units. This LED

should normally be illuminated when the system is operating.

UID LED

The unit identification (UID) button turns on or off the blue light function of the

Information LED and the blue LED on the rear of the chassis. These are used to

locate the server in large racks and server banks.

Power Button

The main power button is used to apply or remove power from the power supply

to the server. Turning off system power with this button removes the main power

but maintains standby power. To perform many maintenance tasks, you must

also unplug system before servicing

2 3 4

SX-Aurora TSUBASA A300-4 User’s Guide

Information LED

Status

Description

Continuously on and red

An overheat condition has occurred.

(This may be caused by cable congestion.)

Blinking red (1Hz)

Fan failure, check for an inoperative fan.

Solid blue

Local UID has been activated. Use this function to

locate the server in a rack mount environment.

Blinking blue

Remote UID is on. Use this function to identify the

server from a remote location.

Front Features

The chassis is a 1U rack mount chassis. See the illustration below for the features included

on the front of the chassis.

Figure 1-2. Chassis Front View

Front Chassis Features

Item

Feature

Description

Hard Drive Bays

Two 2.5" hot-swap hard drive carriers

Control Panel

See previous page for details.

Chapter 1: Introduction

Rear Features

The illustration below shows the features included on the rear of the chassis.

3 5

4 6

1 1 2

Figure 1-3. Chassis Rear View

Rear Chassis Features

Item

Feature

Description

Power Supply Module

Redundant 2000W power supply

I/O Ports

See Section 1.6 for details.

LP1 Slot

PCI-E 3.0 x16 card for InfiniBand HCA

LP2 Slot

PCI-E 3.0 x16 card for InfiniBand HCA

5and 6

FHFL 2 Slot

PCI-E 3.0 x16 for Vector Engine Card

SX-Aurora TSUBASA A300-4 User’s Guide

1.5 System Block Diagram

Figure 1-4. Intel PCH C621 Chipset: System Block Diagram

Note: This is a general block diagram and may not exactly represent the features

on your motherboard. See the System Specifications appendix for the actual

specifications of your motherboard.

#F-1

#E-1

#D-1

#C-1

#B-1

#A-1

VCCP0 12v VCCP1 12v

VR13 VR13

5+1 PHASE

UPI10.4G/11.2G

5+1 PHASE

205W 205W

#M-1

#L-1

#K-1

#J-1

#H-1

#G-1

PECI:30

SOCKET ID:0

#3 #2

DMI3 #1

UPI

P2 PECI:31

SOCKET ID:1

#3 #2 #1 DMI3

PCH

6.0 Gb/S

USB 2.0

#0/1 USB2.0

SPI

Bus S/W

Temp Sensor

W83773 at SMBUS

TPM HEADER

Debug Card

FRONT PANEL

SPI

SATA

PCIex4 or

Flexible I/O

BMC

AST2500

RSC-GN2-A68

CPU0 PCIe X16

CPU1 PCIe X8

NVME X8

SLOT 5

AOM-PIO-i2XT

Rear IO

riser card

DMI3

SLOT 2

SLOT 4

SLOT 1

Two riser options

RSC-G-A66

SLOT 3

FAN SPEED

CTRL

SYSTEM POWER

BIOS

BMC Boot Flash

M.2

DDR4

ESPI

PCIE x4 or

SATA

PCI-E X4 G2

#7 USB2.0

PCI-E X4 G2

#0-3

USB3.0 x2

CPU0 PCIe X16

CPU1 PCIe X16

PCI-E X16

PCI-E X16 G3

PCI-E X16 G3 (RSC-G-6)

PCI-E X16 G3 with re-driver

PCI-E X16 G3 (RSC-GR-6)

PCI-E X16 G3 (RSC-G-6)

COM PORT

VGA

RGRMII

DDRIV

2133/2666

RMII/NCSI

USB

SATA

DDRIV

2133/2666

Inhaltsverzeichnis

Andere NEC Server Handbücher

NEC

NEC Univerge SV8100 Bedienungs- und Montageanleitung

NEC

NEC EXPRESS5800/120Le Bedienungsanleitung

NEC

NEC Express5800/GT110d-S (2C/i3-2120) EXP281A Bedienungsanleitung

NEC

NEC Univerge SV8100 Bedienungsanleitung

NEC

NEC Express5800/T110g-E Bedienungsanleitung

NEC

NEC Univerge SV8100 Betriebsanleitung

NEC

NEC R120d-2E Bedienungsanleitung

NEC

NEC UNIVERGE NEAX 2000 IPS Benutzerhandbuch

NEC

NEC LS2400 Bedienungsanleitung

NEC

NEC Express5800/B120b-d Bedienungsanleitung

NEC

NEC NECCare SigmaBlade Bedienungsanleitung

NEC

NEC Express5800 140He Bedienungsanleitung

NEC

NEC ES1400 Bedienungsanleitung

NEC

NEC Express5800/R120g-1E Betriebsanleitung

NEC

NEC Express 5800/140Rb-4 Bedienungsanleitung

NEC

NEC 120Rf-2 Bedienungsanleitung

NEC

NEC NEC Express5800 Series Bedienungsanleitung

NEC

NEC N8140-801 Bedienungsanleitung

NEC

NEC NEAX IPS NWA-008869-001 Bedienungsanleitung

NEC

NEC EXPRESS5800/120Ef Bedienungsanleitung

NEC

NEC N8100-1223F Bedienungsanleitung

NEC

NEC NECCare Gold Express5800/320Fd Handbuch

NEC

NEC NEC Express5800 Series Bedienungsanleitung

NEC

NEC MH4000 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung