NEC Univerge SV8100 Bedienungsanleitung
Notice
Note that when converting this document from its original format to a
.pdf file, some minor font and format changes may occur. When
viewing and printing this document, we cannot guarantee that your
specific PC or printer will support all of the fonts or graphics.
Therefore, when you view the document, fonts may be substituted and
your individual printer may not have the capability to print the
document correctly.
User’s Guide
INT-2084
Issue 1.0
License Manager Server
®
NEC Unified Solutions, Inc. reserves the right to change the specifications, functions, or features at
any time without notice.
NEC Unified Solutions, Inc. has prepared this document for use by its employees and customers. The
information contained herein is the property of NEC Unified Solutions, Inc. and shall not be reproduced
without prior written approval of NEC Unified Solutions, Inc.
UNIVERGE®is a trademark of NEC Corporation. Pentium®is a trademark or registered trademark of
Intel Corporation or its subsidiaries in the United States and other countries. Windows®is a registered
trademark of Microsoft Corporation.
Copyright 2009
NEC Infrontia, Inc.
6535 N. State Highway 161
Irving, TX 75039-2402
Technology Development
User Guide i
___________________________________________________________________________________
___________________________________________________________________________________
TABLE OF CONTENTS
Section 1.0 Introduction ..........................................................................................1
Section 2.0 60 Day Trial .......................................................................................... 1
Section 3.0 Licensable Items .................................................................................. 2
3.1 System Port Licenses and MEMDB Rules ....................................................... 2
3.2 VOIP Licenses .................................................................................................. 3
3.3 SMDR License .................................................................................................. 4
3.4 CTI License ...................................................................................................... 4
3.5 ACD License ..................................................................................................... 4
3.6 Hotel / Motel / LMS License .............................................................................. 4
3.7 InMail Voicemail License .................................................................................. 5
3.8 Networking License .......................................................................................... 5
Section 4.0 Using the LMS ...................................................................................... 5
4.1 Dealer/ Associate Admin .................................................................................. 5
4.2 Dealer/ Associate Tech .................................................................................... 6
4.3 Login to the LMS System ................................................................................. 7
4.4 Notification When a License is Generated ....................................................... 9
4.5 Adding a Customer and Hardware Key .......................................................... 10
4.6 License Administration ................................................................................... 13
4.7 Attaching Licenses to Customer Locations .................................................... 14
4.8 Assigning a License Using the License / Administration Menu ...................... 14
4.9 Assigning a License Using the Registration / License Registration Menu ...... 20
Section 5.0 Installing a License ........................................................................... 24
5.1 Using PCPro ................................................................................................... 24
5.2 Using WebPro ................................................................................................ 27
5.3 Using a USB Memory Stick ............................................................................ 30
5.4 By Entering the Code Manually ...................................................................... 30
___________________________________________________________________________________
ii Table of Contents
___________________________________________________________________________________
Issue 1.0 License Manager Server
THIS PAGE INTENTIONALLY LEFT BLANK
User Guide 1 - 1
___________________________________________________________________________________
License Management Server
SECTION 1.0 INTRODUCTION
This manual is intended to give an overview on how the licensing procedure operates
on the SV8100 platform. Some features and hardware require an appropriate license
to be installed on a SV8100 processor to work. Each SV8100 CCPU has a unique
Hardware Key that is generated by NEC Infrontia. Software Key Codes can be
downloaded from the License Manager Server (LMS) and assigned to a hardware
key.
The LMS is a web portal where users can login and download a license that can be
installed on a CCPU. The procedure involves logging the hardware key on to the
LMS, and then assigning a software key to the hardware key. After this is done, a
license file can be downloaded and installed on a CCPU blade using PC Pro or a USB
Stick.
SECTION 2.0 60 DAY TRIAL
The 60 day trial should only be used when it is not possible to install a real license
that would have been downloaded from the LMS. If the 60 day trial expires without a
real license being installed, the SV8100 operates using only unlicensed features. By
default the trial is turned Off and can be turned on or off only by using Telepro. Set
Program 90-55-01 to 1 to enable or 0 to disable the trial.
The 60 day trial gives full access to all PBX features for its duration. External
applications do not operate under the trial license, but some of the applications may
have their own trial license that can be used.
The trial rules for the trial are provided below:
The 60 day demo starts when the system is powered on. The option to enable or disable
this feature is available in Data Program 90-55-01 (1=Enable and 0=Disable).
When the CCPU is powered down and left off, the timer stops, and starts counting
again when it is powered on.
To determine the number of days left for the trial, set Program 90-55-01 to 1 and check
Program 10-52-01.
1 - 2 User Guide
___________________________________________________________________________________
___________________________________________________________________________________
Issue 1.0 License Manager Server
If a license has not been installed on the SV8100, and the trial license is turned on and
then off, the days remaining continues to decrease.
After a license is installed on the SV8100, you should set Program 90-55-01 to 0 to turn
off the trial license. This preserves the remaining days left on the trial license and allows
you to turn it back on if needed at a later date.
Program 90-55-01 is currently only available using keyset programming. PC Programming/
Web Pro cannot be used.
When you turn off the free license, registered license devices (e.g., IP Terminals) that are in
use restart.
This Data Program is supported with SV8100 software version 3.0 or higher.
SECTION 3.0 LICENSABLE ITEMS
All of the licensing options can be broken down into different categories. Some
licenses (e.g., SMDR) have a quantity of 1 to turn them on, while others have a
quantity depending on the number of devices that are used. For example, you may
have a license for 20 IP Terminals, in this scenario a license for 20 IP Terminals
would be issued. If you were to purchase SMDR then 1 license would be issued to
turn on SMDR.
References in this manual are made to the license code. License codes (four digits in
length) are the actual codes that are recognized by the SV8100.
Where NetLink is used, a license should be applied only to the Primary Netlink
system. A license should be purchased for each remote NetLink node. If the NetLink
between a primary system and a secondary system goes down, the secondary
system uses an internal license for a period of seven days. If the NetLink connection
to the primary system is not resumed after seven days, the internal license stops
working and the system becomes unlicensed.
3.1 System Port Licenses and MEMDB Rules
System capacity licenses are required for TDM extensions and trunks. The
capacity of the SV8100 depends on whether or not a MEMDB is installed.
If MEMDB is not installed, the system capacity is 64 TDM extension and
trunks. If Inmail is used, eight ports are assigned as voicemail ports. These
ports are TDM and reduce the number of ports in the system from 64 to 56.
When the SV8100 system is powered on, the 60 day demo trial
starts and will count down 60 contiguous days. Disabling
Program 90-55-01 will not deter the countdown progress
Andere Handbücher für Univerge SV8100
89
Inhaltsverzeichnis
Andere NEC Server Handbücher
NEC
NEC N8100-1223F Bedienungsanleitung
NEC
NEC ServerCare Express5800/FT Stücklistenhandbuch
NEC
NEC UNIVERGE NEAX 2000 IPS Benutzerhandbuch
NEC
NEC UNIVERGE NEAX 2000 IPS Benutzerhandbuch
NEC
NEC Univerge SV8100 Bedienungsanleitung
NEC
NEC EXP200 Bedienungsanleitung
NEC
NEC EXPRESS5800/120Ed Bedienungsanleitung
NEC
NEC Express5800/A1040e Bedienungsanleitung
NEC
NEC Express5800/T110j-S Bedienungsanleitung
NEC
NEC Express5800/R120f-2M Bedienungsanleitung
NEC
NEC NECCare SigmaBlade Bedienungsanleitung
NEC
NEC NEC Express5800 Series Bedienungsanleitung
NEC
NEC N8100-1575F Bedienungsanleitung
NEC
NEC NEC Express5800 Series Bedienungsanleitung
NEC
NEC NEC Express5800 Series Bedienungsanleitung
NEC
NEC Express5800/T71f Bedienungsanleitung
NEC
NEC N8100-1573F Bedienungsanleitung
NEC
NEC Express5800/120Rh-2 Bedienungsanleitung
NEC
NEC EXP320R Betriebsanleitung
NEC
NEC NEAX 2000IVS2 Bedienungsanleitung
Beliebte Server Handbücher anderer Marken
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung
Planet
Planet NAS-7410 Bedienungsanleitung