Neilsen CT5673 Bedienungsanleitung
SOLAR FENCE ENERGISER CT5673
INSTRUCTION MANUAL
WARNING: READ ALL INSTRUCTIONS!
If you suspect that the unit is not working, follow these steps:
1. Disconnect the unit from the fence and check that the indicator light is
flashing.
2. Check the battery connection and voltage.
3. Check that the voltage between the live and ground terminals is greater than
7000 v, using a fence voltage tester.
4. If these tests are OK, you have an installation problem.
Cannon Tools Limited
Address:20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM
EC DECLARATION OF CONFORMITY
We CANNON TOOLS LTD
20 Station road, Rowley Regis, West Midlands,B65 0JU.U.K.
Declare that the following machine complies with the appropriate basic safety
and health requirements of the EC Directive based on its design and type, as
brought into circulation by us.
In case of alteration of the machine, not agreed upon by us, this declaration will
lose its validity.
Product description: SOLAR FENCE ENERGISER
Model: CT5673
Applicable EC Directives:
EC Electromagnetic Compatibility 2014/30/EU
ROHS - Directive 2011/65/EU and its amendment directives (EU) 2015/863.
Harmonized standards:
EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019,
EN 55014-1:2017，EN 55014-2:2015,
IEC 62321-3-1:2013, IEC 62321-5:2013,
IEC 62321-4:2013+AMD1:2017 CSV,
IEC 62321-6:2015, IEC 62321-7-1:2015,
IEC 62321-7-2:2017, IEC 62321-8:2017
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
Mr. Gurcharan Tony Singh Sanghera
Managing Director
CANNON TOOLS LTD
2021-09-26
1. SPECIFICATIONS
Excellent fence: 48Km/100Acres
Power output : 0.5J @ 500 ohms
Delivered power vacuum: 0.63J
Solar Consumption: 47mA
Voltage Vacuum: 10KV Max
Waterproof Rating: IP66Outdoor Use
Power Source Battery: DC 12V/8AH
Operates Days without Sunlight: up 2 weeks
Polysilicon Solar Panel Voltage Output (Vmp): DC18V
Polysilicon Solar Panel Current Output (Imp): 0.28A
Polysilicon Solar Panel Power Output (Pmax): 5W
Solar Panel Size: 303 x 213mm
Including: 1 AD/DC adapter, 2 alligator clips.
2. IMPORTANT SAFETY INFORMATION
WARNING!
- Do not connect to mains-operated or line-operated equipment.
- Remove the battery from the unit before using an external battery charger to
recharge the battery.
- Switch the unit off before installation or performing any work on the fence.
- Read all the safety considerations carefully.
- Check your installation to ensure that it complies with all local safety
regulations.
- Do not connect simultaneously to a fence and to any other device such as a
cattle trainer or a poultry trainer.Otherwise, lightning striking your fence will be
conducted to all other devices.
NOTES:
- This product has been designed for use with electric animal fences.
- Keep these instructions in a handy location.
SAFE ELECTRIC FENCE CONSTRUCTION
Warning! Read before use.
An electric fence can be hazardous when there is a risk of entrapment or
entanglement, or other hazards exist. Serious injury or death may result.Take all
steps to avoid the risk of entrapment or entanglement.
The adapter and battery cannot be used at the same time，When using
battery ，adapter cannot be inserted, When using adaptor, need to unplug the
battery.
DANGER
-Do not climb through or under an electric fence. If it is necessary to cross an
electric fence use a gate or specially designed crossing point.
-Do not allow young or infirm persons to use this unit without supervision. Do not
allow young children to play with this unit or near an electric fence or electrified
wires.
-Do not electrify barbed wire.
-Do not support off-set electrified wires less than 6" (150 mm) from the vertical
plane of a barbed wire fence.
-Do not electrify any fence construction which could lead to entanglement of
persons or animals. We recommend for instance, that no more than one
electrified off-set wire be supported on either side of a barbed wire or mesh
fence.
-Do not supply an electric fence from two units.
-Do not allow electrified wires from two units on the same or adjacent properties
to be less than 8'(2.5 m) apart.
-Do not place the unit's ground rod within 33' (10 m) of any part of a power supply
ground system or telecommunications ground system.
-Do not run electric fence wires above or close to overhead power or
communication lines.
Cautions:
1. Feature: 2 dew holes at the bottom of the plastic box prevent water from
accumulating.
2. When not use, the battery clip should be removed to prevent power
consumption.
3. When use AC power, disconnect the battery clips to prevent battery from
burning out.
4. When wire clips connect battery, the side with the spring faces up enable
remove easily.
DUTY TO THE PUBLIC
A warning sign shall be fitted to every point where persons may gain ready
access to the conductors.
Where an electric animal fence crosses a public pathway, a non-electrified gate
shall be incorporated in the electric animal fence at that point or a crossing by
means of stiles shall be provided.At any such crossing, the adjacent electrified
wires shall carry warning signs.
Any part of an electric animal fence that is installed along a public road or
pathway shall be identified at frequent intervals by warning signs securely
fastened to the fence posts or firmly clamped to the fence wires.
The size of the warning sign shall be at least 4x8”(100x200 mm).
The background colour of both sides of the warning sign shall be yellow.
The inscription on the sign shall be black and shall be either:
or the substance of “CAUTION: Electric fence”.
The inscription shall be indelible, inscribed on both sides of the warning sign and
have a height of at least 1”(25 mm).
Definition of special terms
Unit/Charger/Energiser - An appliance that is intended to periodically deliver
voltage impulses to a fence connected to it.
Fence - A barrier for animals or for the purpose of security, comprising one or
more conductors such as metal wires, rods or rails.
Electric fence - A barrier which includes one or more electric conductors,
insulated from ground, to which electric pulses are applied by a unit.
Ground rod - Metal structure that is driven into the soil near a unit and
connected electrically to the Fence ground terminal of the unit, and that is
independent of other grounding arrangements.
Connecting lead-An electric conductor, used to connect the unit to the electric
fence or the ground rod.
Requirements for electric animal fences
Electric animal fences and their ancillary equipment shall be installed, operated
and maintained in a manner that minimises danger to persons, animals or their
surroundings.
Warning! Avoid contacting electric fence wires especially with the head, neck or
torso. Do not climb over, through or under a multi-wire electric fence.Use a gate
or a specially designed crossing point.
This unit is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the unit
by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the unit.
Electric animal fence constructions that are likely to lead to the entanglement of
animals or persons shall be avoided.
An electric animal fence shall not be supplied from two separate units or from
independent fence circuits of the same unit.
For any two separate electric animal fences, each supplied from a separate unit
independently timed, the distance between the wires of the two electric animal
fences shall be at least 8'(2.5 m). If this gap is to be closed, this shall be effected
by means of electrically non-conductive material or an isolated metal barrier.
Barbed wire or razor wire shall not be electrified by a unit.
A non-electrified fence incorporating barbed wire or razor wire may be used to
support one or more off-set electrified wires of an electric animal fence. The
supporting devices for the electrified wires shall be constructed so as to ensure
that these wires are positioned at a minimum distance of 150 mm from the
vertical plane of the non-electrified wires. The barbed wire and razor wire shall be
earthed at regular intervals.
Follow the energiser manufacturer’s recommendations regarding earthing.
A distance of at least 10 m (33ft) shall be maintained between the energiser earth
electrode and any other with the earthing system connected parts such as the
power supply system protective earth or the telecommunication system earth.
Connecting leads that are run inside buildings shall be effectively insulated from
the earthed structural parts of the building. This may be achieved by using
insulated high voltage cable.
Connecting leads that are run underground shall be run in conduit of insulating
material or else insulated high voltage cable shall be used. Care must be taken
to avoid damage to the connecting leads due to the effects of animal hooves or
tractor wheels sinking into the ground.
Connecting leads shall not be installed in the same conduit as the mains supply
wiring, communication cables or data cables.
Connecting leads and electric animal fence wires shall not cross above overhead
power or communication lines.
Crossings with overhead power lines shall be avoided wherever possible. If such
a crossing cannot be avoided it shall be made underneath the power line and as
nearly as possible at right angles to it.
If connecting leads and electric animal fence wires are installed near an
overhead power line, the clearances shall not be less than those shown in Table
below.
Minimum clearances from power lines for electrical animal fences
Power line voltage
Clearance
≤ 1000V
3m (10 ft)
> 1000V and ≤ 33000V
4m (13 ft)
> 33000V
8m (27 ft)
If connecting leads and electric animal fence wires are installed near an
overhead power line, their height above the ground shall not exceed
3m(10ft) .This height applies to either side of the orthogonal projection of the
outer most conductors of the power line on the ground surface, for a distance of:
·2m(6.6ft) for power lines operating at a nominal voltage not exceeding1000V.
·15m (50ft) for power lines operating at a nominal voltage exceeding1000V.
Electric animal fences intended for deterring birds,household pet containment or
training animals such as cows need only be supplied from low output units to
obtain satisfactory and safe performance.
In electric animal fences intended for deterring birds from roosting on buildings,
no electric fence wire shall be connected to the unit's ground rod.
Ensure that all line-operated，ancillary equipment connected to the electric
animal fence circuit provides a degree of isolation between the fence circuit and
the supply mains equivalent to that provided by the unit.
Protection from the weather shall be provided for the ancillary equipment unless
this equipment is certified by the manufacturer as being suitable for use
outdoors,and is of a type with a minimum degree of protection IP66.
3. TECHNICAL DESCRIPTION
4. UNPACKING AND CHECKING
Carefully remove the product from the packaging and examine it for any sign of
damage. If any part is damaged or missing, please contact the seller. Do not
attempt to use the product!
Note: Battery is in the battery compartment.
5. BEFORE FIRST USE
Units may be supplied with or without a battery, depending on your region. If a
battery has been supplied, it will be inside the battery compartment with the
positive terminal disconnected.
Before using the unit for the first time, you must:
1 Insert a battery into the battery compartment (if necessary).
2 Connect the battery terminals.
3 Charge the battery by placing the unit in full sunlight for three days with the
solar panel facing true south in the northern hemisphere and true north in
the southern hemisphere.
Inserting a battery and connecting the battery terminals
1. Place the unit on a flat surface (handle downwards as shown). Open the
battery compartment by unscrewing the screws on the back.
2. Insert a battery (if necessary).
3. Connect the positive (red) lead to the positive (+) terminal on the battery.
Connect the negative (black) lead to the negative (-) terminal on the battery
(if necessary).
4. Close the battery compartment, ensuring that the latches are securely
fastened.
Caution! When connecting the battery, be careful not to short-circuit the
supply terminals.
6. INSTALLATION
Positioning the unit
Install the unit:
• adjacent to the electric fence
• preferably in the middle of the electric fence
• where it will receive the most daily sun throughout the season
• where a good ground can be obtained
• away from flooding and out of reach of animals and children (inside a
protective fence, if required)
Inhaltsverzeichnis
