INSTALLATION
(1) Find an appropriate location for installation (Illustration 1).
(2) Drill holes according to the size of U-bracket as illustration 3 and fix the U-bracket as illustration 2.
(Illustration 1)
Φ20 hole
(Illustration 2)
Camera
U-bracket
(Illustration 3) Unit: mm (Illustration 4)
Camera
Hex head screw (stainless steel)
Washer (stainless steel)
Washer (nylon)
M4*12
M4*0.8
M4*1
(5) Connect the camera tail and the extension cable inside the car (Illustration 5).
(Illustration 6)
Back of Vehicle Body
Bumper
Monitor Image
(6) Loosen the screw between the camera and the fixed U-bracket and adjust the camera to a best viewing angle (Illustration 6).
(3) Drill a Φ20mm next to the U-bracket (Illustration 2).
(4) Fix the camera to the U-bracket (illustration 4).
Rubber Grommet
Extension Cable
Camera Tail
Direction Arrow
(Illustration 5)
