Nematron EPC Series Bedienungsanleitung

Document No. DOC-IPC-001,

User Manual ePC-Series & nPC100, Rev C Rel. 7-2010

PC Series & nPC100

Embedded Ultra-Thin

Industrial Computers

User’s Guide

Revision List

WARRANTY

Nematron warrants to Customer that the Products will be free from defects in material and

workmanship under normal use and service for a period of two years from date of invoice. Customer’s

exclusive remedy for breach of this warranty is that Nematron will either (i) repair or replace, at its option,

any Product which fails during the warranty period because of such defect (if Customer promptly reported

the failure to Nematron in writing) or, (ii) if Nematron is unable to repair or replace, Nematron will refund

the purchase price of the Product upon its return to Nematron. This warranty does not apply to any

Product which has been subjected to misuse, abnormal service or handling, or which has been altered or

modified in design or construction, or which has been serviced by anyone other than Nematron. The

warranty set forth herein is in lieu of, and exclusive of, all other warranties, express or implied.

Document No. DOC-IPC-001, User Manual ePC-Series & nPC100, Rev C Rel. 7-2010

Revision Number Description of Change Release Date

A Initial Release 11-2007

B Revision for Field Wiring Requirements 5-2010

C Added nPC100, –EN units, and –RM option 7-2010

Nematron reserves the right to make changes in specifications described herein at any time without

notice in order to improve design and reliability. Nematron does not assume any responsibility for

the use of any circuitry described; no circuit patent licenses are implied. Nematron assumes no

responsibility for damage caused by misuse or improper use of its products.

Chapter 1 - Introduction

The ePC Series products are high performance color TFT embedded ultra-thin industrial

computers specifically designed for harsh industrial environments including Class I & II, Division 2

Hazardous Locations.

The ePC Series offers four versions with 12.1” SVGA (800 x 600), 15” XGA (1024 x 768), 17”

SXGA (1280 x 1024), or 19” SXGA (1280 x 1024) TFT Color LCD panels. A stand alone “node” version

without an integrated display is also available (nPC100). These high-performance embedded industrial

PCs offer processor options up to a state of the art Intel Core Duo Processor and DRAM options up to 2

GB. A fanless version is also available. With a multitude of I/O included on the standard unit many

automation applications are ideally suited for use with this series. The Ultra-Thin panel depth (2.7” to

3.42”) also makes this series ideal for space constrained applications. With Class I and II Division 2

approvals this industrial PC makes installation in Hazardous Locations applications simple.

Features

•Processor Options up to Intel Core Duo 2.0 GHz options

oFanless Intel ATOM N270 (1.6 GHz, 512K cache, 533 MHz bus)

oIntel Celeron M 440 (1.86 GHz, 1M cache, 533 MHz bus)

oIntel Core Duo T2500 (2.0 GHz, 2M cache, 667 MHz bus)

•DRAM Options up to 2 GB

•160 GB (minimum) easily removable SATA hard drive

oSolid State SATA hard drive upgrade options

•Numerous I/O Ports

oTwo Gigabit Ethernet ports

o4 USB 2.0 ports

o2 RS-232 serial port

o1 RS-422/485 Serial port

oPS/2 mouse and keyboard port (requires splitter)

oType I/II CompactFlash Socket with ejector

oAnalog VGA port for dual screen applications

•UL 508 and UL 1604 listed for Hazardous Locations: Class I, Division 2, Groups A, B, C, D and

Class II, Division 2, Groups F and G, Class III when installed in a NEMA Type 1/4/4x/12

enclosure (does not include the optional enclosed (-EN) units)

•NEMA 4/4X/12 front bezel (panel mount versions only)

•Optional Vented back enclosure (-EN option)

oePC1500 and ePC1900 only.

•2-Year warranty

•RoHS compliant

•European CE mark compliant

•Integral 100 -240 VAC power supply

•Simplified installation with no studs

•Ultra-Thin design – less than 3.25” behind front panel

•VESA compliant – all modes up to SXGA, 75Hz (SVGA on 12” and XGA on 15” unit)

•Optional 5-wire resistive touch screen

•Optional 304 stainless steel front bezel

•Optional ePC1900 Rack Mount front bezel (not NEMA sealed)

•Optional 24 VDC input power

•Windows XP Professional (Windows 7 and Windows Vista Business are optional)

Specifications

Front Panels

The ePC series has NEMA 4/4X/12 sealed front panels when mounted in an appropriate NEMA

rated enclosure. See Chapter 2 for more details on installation and selection of an appropriate enclosure.

All four sizes have very similar front panels with different dimensions.

Figure 1.0: ePC Series Front Panel Comparison

The standard front panels are powder coated aluminum. The optional Stainless Steel front panel is type

304 and will not contain a logo pocket or logo on the front. The window area is clear polycarbonate when

ordered without a touchscreen. The touchscreen option is chemically strengthened glass covered by a

polyester overlay. The polyester overlay has better resistance to chemicals than the polycarbonate

window. Depending on the chemicals involved in your application consideration should be given to

choosing the proper window material. See Appendix X for a chart of some common chemical

resistances. In addition there is a Rack Mount front panel option for the ePC1900 (19” unit) only. This

front panel is powder coated aluminum and is 9U high with four rack mount spaced counter-bored

mounting holes on each side of the panel. This panel is not NEMA sealed when installed.

I/O Panel

All four versions of the ePC series and the nPC100 have a common Input/Output configuration. Figure

2.0 shows the base configuration of the three units.

Figure 2.0: ePC Series I/O configuration

Feature

Description

Video Port

A standard 15-pin analog VGA is provided. This connection allows a second screen

to be easily added to the ePC. In addition the ePC allows this second screen to be

utilized in an extended desktop configuration. See section on configuring the video

for more details on this feature.

Com 1

Com 1 is a standard 9-pin RS-232 serial port.

Com 2 Com 2 utilizes a standard 9-pin serial port. The ePC default configuration for this

port is RS-485. Via a jumper this port can alternately be configured as RS-422. See

section on connector pin-outs and jumpers for more detailed instructions and

information on the configuration of this port.

Com 3

Com 3 is a standard 9-pin RS-232 serial port.

Gigabit Ethernet

Two Ethernet ports are provided that are both capable of 10/100/1000 Base-T

communications.

USB 2.0

Four ports capable of USB 1.1 and USB 2.0 are provided.

PS/2 Port One PS/2 port is provided. This port is capable of being used singularly as a mouse

or keyboard port. If both devices are desired to be utilized simultaneously the

supplied Y-cable cable must be utilized. The keyboard or mouse must be connected

to the appropriately marked cable end.

Input Power

Input power, whether AC or DC, is supplied via a Phoenix connector. See Chapter 2

on Installation for more details on how to wire this connection. This is replaced by an

IEC type power cord connection on the –EN units.

CompactFlash

A Type I/II CompactFlash socket is provided. This socket has an ejector built into it

for easy card removal. The CompactFlash can be utilized like floppies, CDs, or

DVDs. This can be utilized as read only or writable devices.

SATA Hard Drive

An easily removable high speed Serial ATA hard drive is provided. The captive

retention hardware, lack of cumbersome cables, and handle make changing hard

drives an easy task.

DISPLAY

ePC1200

ePC1500

ePC1700

ePC1900

Display Diagonal 12.1” (307.34mm) 15.0” (381.0mm) 17.0” (431.8mm) 19.0” (482.6mm)

Display Size

(Active Area

HxV)

9.69” x 7.26”

(246.0mm x

184.5mm)

11.97” x 8.98”

(304.0mm x

228.1mm)

13.30” x 10.64”

(337.8mm x

270.3mm)

14.82” x 11.85”

(376.4mm x

301.0mm)

Native Resolution SVGA, 800 x 600 XGA, 1024 x 768 SXGA, 1280 x

1024 SXGA, 1280 x

1024

Displayable

Colors 262K 16M 16M 16M

Brightness,

Typical 400 Nit 250 Nit 300 Nit 300 Nit

Contrast Ratio,

Typical 500:1 800:1 800:1 1300:1

Horizon/Vertical

View Angle,

CR>5, Typical 130°/110°150°/145°176°/170°178°/178°

Backlight Life,

Typical 50,000 hrs 50,000 hrs 50,000 hrs 50,000 hrs

TOUCH SCREEN (Optional)

Touch Screen Technology 5- Wire Analog Resistive

Interface Internally via USB

Resolution 4096 x 4096

Positional Accuracy (Maximum Error) 0.18” (0.19” ePC1900)

4.57mm (4.83mm ePC1900)

Positional Accuracy (Standard Deviation of Error) < 0.08” (< 2.0 mm)

Expected Life >35,000,000 Activations

PHYSICAL

ePC1200

ePC1500

ePC1700

ePC1900

Over All

Dimensions

(H x W x D)

10.475” x 12.9” x

3.42”

(266.1mm x

327.2mm x

86.75mm)

12.80” x 15.80” x

2.95”

(325.1mm x

401.3mm x

74.9mm)

14.48” x 17.14” x

3.10”

(367.8mm x

442.0mm x

78.7mm)

15.70” x 18.66” x

3.25”

(398.8mm x

474.0mm x

82.6mm)

Panel Mounting

Depth 3.165” (80.4mm) 2.70” (68.6mm) 2.90” (73.7mm) 3.00” (76.2mm)

Cutout

Dimensions

(H x W)

9.68” x 12.10”

(245.9mm x

307.3mm)

12.00” x 15.00”

(305mm x

381mm)

13.70” x 16.35”

(348mm x

415.3mm)

14.90” x 17.75”

(378.5mm x

450.9mm)

Weight 10.45 lbs (4.76kg) 14.0 lbs (6.36kg) 19.0 lbs (8.63kg) 22.5 lbs (10.22kg)

Shipping

Weight 14.0 lbs (6.35kg) 16.5 lbs (7.5kg) 23.5 lbs (10.67kg) 27.5 lbs (12.49kg)

Option Weight

(-SS) +2.5 lbs (1.13kg) +3.5 lbs (1.58kg) +3.75 lbs (1.70kg) +4.0 lbs (1.81kg)

The nPC100 is essentially the rear of the panel mount versions. It is supplied with mounting brackets so

that it can be easily attached to wall or shelf in a NEMA 1 or better enclosure. The nPC100 is not a

standalone device as the –EN units and must be installed in an enclosure to protect operators.

The dimensions of the nPC100 unit are as follows:

ELECTRICAL

AC Input Voltage 100 – 240 VAC, 50/60 Hz

AC Input Current 1.0 A Maximum

DC Input Voltage (Optional) 18 – 36 VDC

DC Input Current (Optional) 4.2 A Max @ 24VDC

Input Power nPC100 – 40 W Typical* (20 W fanless option)

ePC1200/ePC1500 - 50 W Typical* (30 W fanless option)

ePC1700 – 60 W Typical* (40 W fanless option)

ePC1900 – 70 W Typical* (50 W fanless option)

* Typical Power is measured without any additional I/O or expansion options. Any additional I/O installed

during application can increase this value.

ENVIROMENTAL

Operating Temperature 0°C to 50°C

Non-Operating Temperature -20°C to 60°C

Operating & Non-Operating Humidity 20% to 80% RH, non-condensing

Operating Shock* 15g peak acceleration, 11msec

Non-Operating Shock 30g peak acceleration 11msec

Operating Vibration (5-2000 Hz) 10.006” peak to peak displacement,

1g maximum acceleration

Non-Operating Vibration (5-2000 Hz) 1

Operating Altitude 2Sea level – 10,000 feet

Non-Operating Altitude 2Sea level – 40,000 feet

1 Shock and Vibration specifications are established using Solid State drives and non-rotating media.

2 Altitude Specification is established by using all internal component specifications.

AGENCY

Front Panel NEMA Rating NEMA 4/4X/12, IP65

FCC 47 CFR, Part 15, Class A

EU CE Marking Compliance CE, EN 55022: Class A,

EN 61000-3-

2: Class A,

EN 61000-3-3, EN 61000-6-

Safety Agency Approvals

(panel mount and nPC100

versions only) UL 508 Listed, UL 1604 Listed*, cUL

Listed CSA C22.2, #142, CSA

C22.2, #143*

Safety Agency Approvals

(enclosed ePC1500 and

ePC1900 only) UL 508 Listed, cUL Listed CSA

C22.2

* See appropriate note below for the applicable unit or option being utilized.

NOTE (NPC100 UNITS): SUITABLE FOR USE IN CLASS I, DIVISION 2,

GROUPS A, B, C AND D HAZARDOUS LOCATIONS, OR NONHAZARDOUS

LOCATIONS ONLY

FOR USE ON A FLAT SURFACE OF A TYPE 1

ENCLOSURE WITH

PROVISIONS FOR CLASS I DIVISION 2 WIRING METHODS

TEMPERATURE CODE: T4A

NOTE (PANEL MOUNT VERSIONS):

SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D, CLASS

II DIVISION 2, GROUPS F AND G, CLASS III HAZARDOUS LOCATIONS, OR

NONHAZARDOUS LOCATIONS ONLY

FOR USE ON A FLAT SURFACE OF A TYPE 1, 4, 4X, OR 12 ENCLOSURE

WITH PROVISIONS FOR CLASS I DIVISION 2 WIRING METHODS

TEMPERATURE CODE: T4A

WARNING – EXPLOSION HAZARD –

DO NOT DISCONNECT EQUIPMENT

UNLESS THE POWER HAS BEEN SWITCHED OFF OR THE AREA IS KNOWN

TO BE NON-

HAZARDOUS. PS/2 CONNECTOR IS FOR SETUP AND

MAINTENANCE ONLY, USB CONNECTIONS MUST BE SECURED WITH

INCLUDED RETENTION BRACKET – SEE INSTALLATION INSTRUCTIONS

WARNING – EXPLOSION HAZARD –

DO NOT DISCONNECT EQUIPMENT

WHILE THE CIRCUIT IS LIVE OR UNLESS THE AREA IS KNOW TO BE FREE

OF IGNITABLE CONCENTRATIONS.

NOTE (RACK MOUNT VERSIONS):

SUITABLE FOR USE IN CLASS I, DIVISION 2, GROUPS A, B, C AND D, CLASS

II DIVISION 2, GROUPS F AND G, CLASS III HAZARDOUS LOCATIONS, OR

NONHAZARDOUS LOCATIONS ONLY

FOR RACK MOUNT INSTALLATION ON A TYPE 1 ENCLOSURE WITH

PROVISIONS FOR CLASS I DIVISION 2 WIRING METHODS

TEMPERATURE CODE: T4A

NOTE: (ENCLOSED EPC VERSIONS):

A LISTED VESA STYLE MOUNT SUITABLE WITH A MINIMUM LOAD RATING

OF 40 POUNDS SHALL BE USED IN THE END INSTALLATION

FOR USE IN NONHAZARDOUS LOCATIONS ONLY

TYPE 1 ENCLOSURE

WARNING – EXPLOSION HAZARD – SUBSTITUTION OF COMPONENTS MAY

IMPAIR SUITABILITY FOR CLASS I, DIVISION 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Nematron Industrie-PC Handbücher

Nematron

Nematron AEMC236-990 Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

Advantech

Advantech UNO-2184G Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-682C Series Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Advantech

Advantech IPPC-6152A Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung

Nematron ePC Series Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken